OF SAUNA
CLIFF Embedding Flange
Instructions
Embedding Flange
- Prepare an opening for the embedding flange. See the figure below.
- It is essential that you don’t cut off the corners of the opening.
- Place the slats so that they fit into the opening.
- Pre-drill ø 1/8” in / 3.0 mm holes according to the screw holes of the slats.
- Fasten the corners using screws. Done!
Find the latest updates on our website www.huumsauna.com
Figure to cut the opening
info@huum.eu
huum.eu
#huumsauna
HUUM Sauna OÜ
Vahi tee 9, Tartumaa
60534, EstoniaMade in Estonia, EU
Documents / Resources
![]() |
HUUM CLIFF Embedding Flange [pdf] Instructions CLIFF, CLIFF Embedding Flange, Embedding Flange, Flange |