Ankadreman background PROAIM DL-CMPS-BF

Enfòmasyon sou pwodwi

Espesifikasyon:

• Non pwodwi: Ankadreman Proaim Background
• Nimewo Modèl: XXXX
• Materyèl: Steel
• Koulè: Nwa
• Dimansyon: X pous (L) x X pous (W) x X pous (H)
• Pwa: X liv

Deskripsyon:
The Proaim Background Frame is a sturdy steel frame designed to support backdrops for photography or videography purposes. It comes with spring clamps pou fasil konfigirasyon ak ajisteman.

Enstriksyon Itilizasyon Pwodwi

Setting Up the Background Frame:

1. Debale sa ki nan bwat la epi mete yo atè.
2. Assemble the background frame setup according to the provided instructions.
3. Atache klòch prentan sipò pou fon anamp securely to the frame.

Attaching the Backdrop:

1. Choose a backdrop of your choice that fits the frame dimensions.
2. Fikse background nan nan ankadreman an avèk klip prentan an.amps.
3. Adjust the tension of the backdrop as needed for a smooth surface.

Pwodwi pou Telefòn opsyonèl:
If you have optional accessories, such as additional backdrops or lighting equipment, you can attach them to the background frame for enhanced photography/videography setups.

Ki sa ki nan bwat la

Tanpri enspekte sa ki nan pake ou anbake pou asire ou te resevwa tout sa ki nan lis anba a.

Konfigirasyon Ankadreman Fon

• Take one frame tube and align it with the adjoining tube.

  
• Press the pushpin button, insert the frame tube into the adjoining tube, and release to lock.

  
• Repeat this process to connect all the lower frame sections.

  
• After assembling the lower half, follow the same steps to attach the upper horizontal part of the frame.
• Once completed, the full rectangular frame is assembled.

  

• Loosen the knobs on the mounting brackets located at the bottom of the frame.
• Pull outward to create space for mounting.

  
• Align and attach the frame base with the mounting slot on the Compass 360°Photo Booth (not included).

  

• Tighten both knobs firmly to secure the frame to the Compass Booth.
• The frame is now securely attached to the Compass 360° Booth.

  

• Use the included Backdrop Support Spring Clamps to attach your background cloth (not included) to the frame.
• Clip the cloth evenly across the top and sides for a smooth, professional look.

  

PROAIM BACKGROUND FRAME

FOR COMPASS 360° PHOTO BOOTH ROTATING CAMERA PLATFORM ALL DRESSED UP AND READY TO GO!

Garanti

Nou ofri yon garanti yon ane sou pwodwi nou yo apati dat acha a. Pandan peryòd sa a, n ap repare pwodwi a gratis pou travay oswa pyès. Garanti a pa kouvri depans transpò oswa pwodwi ki te mal itilize oswa ki te domaje aksidantèlman. Tout reparasyon garanti yo sijè a enspeksyon ak evalyasyon pa ekip nou an.

Responsablite

Nou pa responsab pou okenn domaj ki koze pa pwodwi twazyèm pati, move manyen pandan transpò, aksidan, move itilizasyon, neglijans, oswa antretyen san otorizasyon nan pwodwi a.

Kontakte nou

Si ou pa satisfè, tanpri kontakte nou imedyatman. Nou angaje nou pou nou ba ou pi bon sipò ak swen posib pou asire satisfaksyon ou ak pwodwi nou an.

Kesyon yo poze souvan

Can I use this background frame for outdoor shoots?

The Proaim Background Frame is designed for indoor use. It may not withstand outdoor conditions or wind.

How do I clean the background frame?

Sèvi ak anonsamp cloth to wipe down the frame and avoid using harsh chemicals that may damage the finish.

Dokiman / Resous

Ankadreman background PROAIM DL-CMPS-BF [pdfManyèl Enstriksyon DL-CMPS-BF, DL-CMPS-BF Ankadreman Imaj, Ankadreman Imaj, Ankadreman

Referans

• Manyèl itilizatè