FASTMIND LABS PULSE Series One App
Espesifikasyon
- FCC ID: 2BQSO-WS01X
- Model: PULSE
- Ekspozisyon RF: Konfòme ak egzijans jeneral ekspoze RF
- Itilizasyon: Kondisyon ekspoze pòtab san restriksyon
Enstriksyon Itilizasyon Pwodwi
- Asire w ke aparèy la chaje konplètman anvan premye itilizasyon.
- Power on the device by pressing and holding the designated power button.
- Swiv envit sou ekran yo pou premye konfigirasyon ak konfigirasyon.
- To start using the device, navigate through the menu options using the provided controls.
- Refer to the user manual for specific functionalities and features of the device.
- Properly maintain and clean the device as per the care guidelines provided.
- If you encounter any issues, refer to the troubleshooting section of the user manual or visit the support websit pou asistans.
KÒMANSE
Follow these steps to unlock your body’s pattern with PULSE.
- Download Pulse App. Available for iPhone and Android.
- Charge Your Pulse. Use the included charger and USB-C cable.
- Connect in App. Follow pairing instructions in the app.
- Wear Pulse stays on at all times.
- Limited data shown initially. Full insights are available after calibration.
Devan
IMPULSYON
- THE HYPERWEAVE
Retounen
QUICK CARE GUIDE
KOTE PWANP
Pou pousyè tè ki lejè, siye ak yon anvlòpamp twal,
LAVE DOU
For a deeper clean, hand wash with cool water and a drop of mild soap. Rinse thoroughly.
È sèk sèlman
Pat with a towel and lay flat to air dry completely before wearing.
- Avoid direct heat or sunlight, as it can cause fading and damage.
- Pou plis enfòmasyon detaye, tanpri vizite pulse.site/support
Pou plis enfòmasyon detaye, tanpri vizite pulse.site/support
Devan
IMPULSYON
- THE FOUNDER
Retounen
WIPE CLEAN
Regularly wipe the strap with a soft, dry, lint-free cloth., For tougher grime, you can use a soft-bristle brush to gently clean the mesh.
DRY IMMEDIATELY
- If the strap gets wet, dry it thoroughly with a soft cloth.
- Prolonged exposure to water can cause fading and damage.
Avètisman FCC
Aparèy sa a konfòm ak pati 15 Règ FCC yo. Operasyon an sijè a de kondisyon sa yo:
- Aparèy sa a pa ka lakòz entèferans danjere, ak
- Aparèy sa a dwe aksepte nenpòt entèferans resevwa, enkli entèferans ki ka lakòz operasyon endezirab.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and uses can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reoryantasyon oswa deplase antèn k ap resevwa a.
- Ogmante separasyon ki genyen ant ekipman ak reseptè a.
- Konekte ekipman an nan yon priz sou yon sikwi diferan de sa ki reseptè a konekte.
- Konsilte konsesyonè a oswa yon teknisyen radyo/televizyon ki gen eksperyans pou èd.
FCC RF deklarasyon ekspoze:
Yo evalye aparèy la pou satisfè egzijans jeneral ekspoze RF yo. Aparèy la ka itilize nan kondisyon ekspoze pòtab san restriksyon.
FAQ
Q: Is the PULSE device waterproof?
A: No, the PULSE device is not waterproof. Avoid exposing it to water or moisture to prevent damage.
K: Kouman pou mwen chaje aparèy la?
A: Use the provided charging cable to connect the device to a power source. Follow the charging guidelines mentioned in the user manual.
K: Èske yo ka itilize aparèy la pandan y ap chaje?
A: Yes, you can use the device while it is charging. However, ensure that the charging cable does not interfere with the device's operation.
K: Kisa mwen ta dwe fè si aparèy la jele?
A: In case of a device freeze, try restarting it by performing a soft reset. If the issue persists, contact customer support for further assistance.
Dokiman / Resous
 |
FASTMIND LABS PULSE Series One App [pdfGid Itilizatè WS01X, 2BQSO-WS01X, 2BQSOWS01X, PULSE Series One App, Series One App, One App, App |