HRV LCD Keypad Air Filtration System User Manual

LCD Keypad Air Filtration System

“

Product Information

Specifications:

• Model: HRV Filter Light Resetter
• Compatibility: LCD Keypad, LED Controller (TEMP Keypad), Touch
  Screen Keypad
• Power Source: Battery operated
• Manufacturer: XYZ Corporation

Product Usage Instructions

Resetting Filter Light Settings – LCD Keypad:

1. Switch the Keypad Off.
2. Hold down on the down arrow until ’02’ appears on the screen,
   then release.
3. Change ’02’ to ’23’ using the ‘up’ arrow.
4. Press the ‘POWER’ button once.
5. Press the ‘FUNC’ button once.
6. The Filter Light should no longer be flashing.

Resetting Filter Light Settings – LED Controller (TEMP
Keypad):

1. Switch the Keypad Off.
2. Hold down on the down arrow until ’02’ appears on the screen,
   then release.
3. Change ’02’ to ’23’ using the ‘up’ arrow.
4. Press the ‘POWER’ button once.
5. Press the ‘FUNC’ button once.
6. The Filter Light should no longer be flashing.

Resetting Filter Light Settings – Touch Screen Keypad:

1. Press Menu (#10).
2. Press ‘Next’.
3. Press ‘Next’ again – you should be on ‘Menu 3’.
4. Press ‘About your HRV’.
5. Tap on the HRV logo 5 times.
6. Press ‘Next’.
7. Press ‘Next’ again – you should be on ‘Installer 3’.
8. Press ‘Filter Reset’.
9. ‘Press Reset’.
10. The Filter Light should no longer be flashing.

NB: Please don’t hesitate to contact us on 0800
478 123 if you need any assistance with the above.

Frequently Asked Questions (FAQ)

Q: How often should I reset the filter light settings?

A: It is recommended to reset the filter light settings whenever
the filter light indicator starts flashing to ensure optimal
performance of your HRV system.

Q: Can I use this product with other HVAC systems?

A: The HRV Filter Light Resetter is designed specifically for
HRV systems. For compatibility with other systems, please consult
the manufacturer or contact customer support.

“`

Resetting Filter Light Settings
LCD Keypad 1. Switch Keypad Off 2. Hold down on the down arrow until ’02’ appears on the screen, then release. 3. Change ’02’ to ’23’ using the ‘up’ arrow 4. Press ‘POWER’ button once 5. Press ‘FUNC’ button once **The Filter Light should no longer be flashing**
LED Controller (TEMP Keypad) 1. Switch Keypad Off 2. Hold down on the down arrow until ’02’ appears on the screen, then release. 3. Change ’02’ to ’23’ using the ‘up’ arrow 4. Press ‘POWER’ button once 5. Press ‘FUNC’ button once **The Filter Light should no longer be flashing**
Touch Screen Keypad 1. Press Menu (#10) 2. Press ‘Next’ 3. Press ‘Next’ again – you should be on ‘Menu 3’ 4. Press ‘About your HRV’ 5. Tap on the HRV logo 5 times 6. Press ‘Next’ 7. Press ‘Next’ again – you should be on ‘Installer 3’ 8. Press ‘Filter Reset’ 9. ‘Press Reset’ **The Filter Light should no longer be flashing**
NB: Please don’t hesitate to contact us on 0800 478 123 if you need any assistance with the above.

Documents / Resources

HRV LCD Keypad Air Filtration System [pdf] User Manual LCD Keypad, LED Controller TEMP Keypad, Touch Screen Keypad, LCD Keypad Air Filtration System, LCD Keypad, Air Filtration System, Filtration System, System

References

• User Manual