HPRT MT610 Mobile Printer Instruction Manual

Product Introduction

HPRT MT610 Mobile Printer - Product Introduction

Install the print paper

HPRT MT610 Mobile Printer - Install the print paper

HPRT MT610 Mobile Printer - Install the print paper

warning logoPlease use HPRT official thermal paper for a better printing experience.

Power On

01 Power on
Hold down the power button for 3 seconds to start the printer.

HPRT MT610 Mobile Printer - power on

warning logoTo turn off the printer, also hold down the power button for 3 seconds.

Printing from PC

  1. Connect one side of the USB cable to the PC and the other side to the printer.
  2. Turn on the printer.
  3. Download the printer driver from the website: https://www.hprt.com/HPRT-MT610
    And then install it on the PC.
  4. Choose the document you want to print from the PC and print it via printer “HPRT MT610 ”.
    HPRT MT610 Mobile Printer - Printing from PC

Printing Wirelessly from Mobile Phone

  1. Download App
    Scan the QR code below to download App.
    HPRT MT610 Mobile Printer - QR code

    https://play.google.com/store/apps/details?id=com.hprt.hereprint&pli=1

  2. Connect with the printer
    Turn on the Bluetooth on the phone, open the App, click “Connect printer”, and “Connect” with “MT610 -xxxx”.
  3. Print
    1 . Open the document you want to print, and copy/share it to App.
    (Or select document printing on the App home page).
    2. Adjust it in the print preview, and click the print icon on the top right corner to print.

warning logoNote: App operation shall be subject to the latest version.

Battery Charging

When the battery is low, the operational status LED will flash (red light flashes quickly). Please use the matching USB cable to charge in time. If you continue printing, the printer may shut down automatically.

HPRT MT610 Mobile Printer - Battery Charging

Precautions

  1. The best operating temperature is 0℃~40℃, if the environmental tempera- ture is too low or too high, the print quality may be affected.
  2. Please do not use the unofficial paper roll to ensure the print quality.
  3. During printing, the printer head will heat up,do not touch it to avoid burns.
  4. Do not pull out the paper by force during printing, or else it may damage the printer.

LED Indicator Definitions

  1. Error Status
    HPRT MT610 Mobile Printer - Error Status
  2. Printer Status
    HPRT MT610 Mobile Printer - Printer Status
  3. Connection status
    HPRT MT610 Mobile Printer - Connection status
  4. Charging status
    HPRT MT610 Mobile Printer - Charging status

Product Parameters

Product Name:Mobile Printer
Product Model:MT610
Battery Parameter:7.4V, 2000mAh
Dimensions:266 x 55 x 47mm
Weight:About 0.5kg (without accessories)
Operating Temperature:0℃~40℃

Note: The illustrations of products, accessories, and user interface in the manual are for reference only. Due to product innovation and upgrade, the actual product may differ slightly from the illustrations, please refer to the actual product.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID:2AUTE-8DT23J

Please Scan QR Code to Get 24h After-sales Technical Support Service
HPRT MT610 Mobile Printer - Technical Support Service qr code
https://www.hprt.com/Amazon/

Search“HPRT Official ”on YouTube to Get Instruction Videos
HPRT MT610 Mobile Printer - HPRT YouTube Website QR code
https://www.youtube.com/channel/UCqviPClZOMPXajv95OJg8IQ

Search“HPRT Official ”on Facebook to Get Extra Consumables of Printer
HPRT MT610 Mobile Printer - HPRT Facebook Website QR code
https://www.facebook.com/HPRT_Official

Xiamen Hanin Co., Ltd.
E-mail: support@hprt.com
Web: www.hprtprinter.com

HPRT MT610 Mobile Printer - HPRT logo

MT610

 

Documents / Resources

HPRT MT610 Mobile Printer [pdf] Instruction Manual
MT610 Mobile Printer, MT610, Mobile Printer, Printer

References

Leave a comment

Your email address will not be published. Required fields are marked *