ClearGuard
Wireless Automated Toilet Door Switch Set
Instruction Manual

Thank you for purchasing the Hotron Clear Guard switch.
The Clear Guard switch is designed to help automate access to public toilets for people who ordinarily would require assistance.

Specifications

Set	Receiver (CG-Rx)		1 EA
	Internal Switch (CGI-Tx) / External Switch (CGE-Tx)		1 Each
	Power Connector (Gray)		1 EA
	Output Contact Point Connector (Yellow)		1 EA
	Screw		2 EA (3 X 8 size)
	Double-sided Tape		2 EA
	Battery		1.5V AAA Size 8 EA
	Manual		1 Copy
	HEX Screw driver		1 EA (2mm)
Spec	Receiver (CG-Rx)		Internal Switch (CGI-Tx) / External Switch (CGE-Tx)
	Power	DC12-30V/AC12-24V	Rated Frequency	2.455GHz
	Relay Contact Capacity	1A/30VDC, 0.5A/125VDC	Battery	1.5V AAA 4EA Each
	Operating Temp	-20 C-50 (‘	Operating Temp	-20 (-50
	Product Size	150x43x25mm	Product Size	90x220x15mm
	Current Consumption	Stancby. 3CrnA/ Operation: 8CrnA(for DC24V)	International Protection	I P65

General Information

Operation Check & Caution

1. Input DC12~30V/AC12-24V for power supply. Make sure power LED is on.
2. Put AAA size batteries into the internal & external switches.
3. Register the internal & external switches with the receiver.
4. Ensure the receiver (CG-Rx) is wired correctly.
5. Immediately change the batteries when aural alert is heard.
6. Athough the CGI-Tx and CGE-Tx are IP65 water resistant, excessive water can cause damage to the internal components.

User Manual

1. ID Registration
   Ensure the Receiver is powered up and press and hold the open or close button on the Internal or External switch whilst pressing the Register/Delete button on the Receiver.
   When pairing is successfully executed, “DOOR IS OPENING” will be heard.
   
2. ID Deletion
   Power on the receiver and press the register/delete button for more than 10 seconds.
   The buzzer sounds and your ID is deleted successfully.
3. Press the blue door open button on the external switch to enter the toilet.
   Once inside, press the red door close button to lock the door.
   The occupied symbol (Add image of lock here)will illuminate on the external switch if entry is attempted whilst the toilet is occupied.
4. Emergency Open
   Keep pressing the open button on the external switch until the word “ Occupied” is heard 10 times.
5. Setting the Door Hold Open Time (Default : Manual)
   

   Dip Switch	Time	Dip Switch	Time
   	After 3 s close the door		After 15 min, close the door
   	After 15 s close the door		Manual (Toggle) open or close by pressing button

6. Voice Language Selection
   

   Dip Switch (Default : ENG)

7. Switch Operation Announcement

The door will automatically open one hour after it has been closed from the inside.

External Dimensions

Documents / Resources

Hotron R-C-RSN-WHD4 ClearGuard Wireless Automated Toilet Door Switch Set [pdf] Instruction Manual R-C-RSN-WHD4, R-R-RSN-WHD8, R-C-RSN-WHD4 ClearGuard Wireless Automated Toilet Door Switch Set, ClearGuard Wireless Automated Toilet Door Switch Set, Wireless Automated Toilet Door Switch Set, Toilet Door Switch Set

References

• User Manual