X3AA2 Projector
“
Product Specifications
- Dimensions: 220*170mm, 110*170mm
- Weight: 300g (device), 128g (remote control)
Product Usage Instructions
Safety Instructions
Read all instructions before using the device. Do not make any
changes or settings not described in the manual to avoid warranty
voidance.
- Avoid exposing the device to rain or moisture to prevent fire
or electric shock. - Avoid placing the device on soft surfaces that can pose a fire
hazard. - Avoid placing the device in dusty areas or near strong magnetic
fields. - Ensure ventilation holes are not blocked to prevent
overheating. - Allow sufficient space around the device for proper
ventilation. - Protect the device from direct sunlight, heat, extreme
temperatures, and moisture. - If the device becomes hot during long operation, shut it down,
unplug, and allow it to cool before resuming. - Handle the device with care, avoiding touching the lens and
supervising children’s use. - Use only manufacturer-specified attachments and
accessories. - Avoid extreme vibration to prevent internal component
damage.
Getting Started
1. Plug the power cable into the projector.
2. Press the power button to turn on the projector.
3. Use manual focus by pressing the Focus button on the remote
control. Ensure the projector is horizontal to the screen for
optimal focus.
Cleaning Method
- Prepare a screwdriver to unscrew the screws.
- Clean the projector using a cotton swab.
- Reinstall the bottom cover after cleaning.
Network Setting
Access settings icon on the homepage – Setting – Network – Wi-Fi
– Connect to Network. Choose a network and enter the password to
connect.
Bluetooth Setting
Navigate to settings – Network – Bluetooth – Search for
Bluetooth device. Pair the desired device for connection.
CEC Setting
In settings, go to Network – HDMI CEC – CEC. Enable CEC to
control CEC devices like TV sticks with the remote control.
Picture Setting
In settings, select Picture to personalize picture settings,
change picture mode, and set eye protection mode.
FAQ
How do I pair the Bluetooth remote controller?
To pair the remote controller, keep it close to the projector,
then press and hold both Left and Right buttons for three seconds
to initiate pairing.
“`
220*170mm,110*170mm [&300g 128g]
User Manual
Safety Instructions
Read all instructions before you use this device. Do not make any changes or create settings that are not described in this manual. If physical damage, loss of data or damage is caused by failure to follow instructions, the warranty does not apply.
1. To reduce the risk of fire or electric shock, do not expose the device to rain or moisture. Objects filled with liquids, such as vases, should not be placed on this device.
2. Do not place this device on soft surfaces such as tablecloths or carpets, otherwise the device could be a fire hazard.
3. Do not place this device in areas susceptible to excessive dust and dirt or near any appliance generating a strong magnetic field.
4. To prevent overheating, do not block or clog the ventilation holes.
5. Never place this device in a confined space. Always leave enough space around this device for ventilation.
6. Protect this device from overexposure to direct sunlight, heat, large temperature fluctuations and moisture. Avoid extreme temperatures.
7. When this device is running for a long period of time, the surface may become hot. Shut it down immediately and unplug the charger. Resume operation after this device has cooled down.
8. Always handle this device with care. Avoid touching the lens. Do not allow children to handle the device without supervision.
9. Use attachments or accessories specified by the manufacturer only.
10. Avoid extreme vibration as it may damage the internal components.
Package List
Projector × 1
Remote Control × 1 (Batteries are not included)
Adapter × 1
HDMI Cable × 1
Projector User Manual × 1
Clean Tool × 1
– 1 –
Overview
IR receiver On / Off
3.5mm Stereo Jack USB Input
HDMl lnput
IR receiver
Power Socket
– 2 –
Remote Control
Power Al Voice Bluetooth Speaker
Back Home VOL + / Netflix Disney +
Input Setting
D-Pad with center select
Menu Screen Cast Focus +/-
YouTube Prime Video
Note: The matching interface of Bluetooth remote control, Press”Voice input” button to bring up the matching guide.
Bluetooth remote controller pairing: Please keep the Remote Controller close to the Projector, press and hold Left button and Right button for three seconds to pair.
– 3 –
Getting Started
Plug the power cable to the projector. Press power button to turn on the projector.
Use the manual focus by pressing the “Focus” button on the remote control. Tips: Make sure the projector is horizontal to the projector screen.
– 4 –
Cleaning Method
1. Get the screwdriver ready, unscrew the screws.
2. Clean the projector by the cotton swab.
3. Reinstall the bottom cover after cleaning.
– 5 –
Network Setting
Click Setting icon on the homepage – Setting – Network – Wi-Fi – Connect to Network > Choose the network and type the password that you want to connect to.
Bluetooth Setting
Click Setting icon on the homepage – Setting Network- Bluetooth -Search for Bluetooth device >Click search and pair the device that you want to connect to.
– 6 –
CEC Setting
Click Setting icon on the homepage – Setting – Network – HDMI CEC – CEC > Enable CEC, CEC devices such as TV sticks can be controlled remotely with remote control.
Picture Setting
Click Setting icon on the homepage – Setting – Picture >Perform personalized picture settings, change picture mode, set eye protection mode.
– 7 –
Sound Setting
Click Setting icon on the homepage – Setting – Sound >Set the sound quality balance of the machine sound, adjust the sound mode, choose the output device and output format of the sound.
Lens Setting
Click Setting icon on the homepage – Setting – Lens >Set the projection direction, autofocus, keystone correction, digital zoom.
– 8 –
Device Preference
Click Setting icon on the homepage – Setting – Device Preferences>Change language, set date and time, choose keyboard, set screen saver and sleep timer, check device information, reset projector, restart projector, whale OS cast, set energy saver, menu timer.
Whale OS Cast
Connect your phone and the projector to the same network. Enter to Setting – Device Preference -Whale OS Cast – TV Casting, download TV Casting accroding to the tips. After installation, search and click the projector device on your phone to share screen.
– 9 –
App Setting
Click Setting icon on the homepage – Setting – App Setting > Check recently opened applications, view all applications, and app permissions.
Voice Service
Click Setting icon on the homepage -Setting – Voice Service >The language selection and timbre of intelligent speech can be adjusted.
– 10 –
Software Update
Click Setting icon on the homepage -Setting – Software Update>Update the software and view the current software information.
File Management
Insert the U disk, click the File icon on the homepage. The content of U disk could be read, such as video, audio,picture, etc.
– 11 –
Bluetooth Speaker
Find the Bluetooth speaker icon on the desktop, click to enter the Bluetooth speaker mode.Search for machine name on your mobile phone, and then pair and connect.Click <Turning off the screen> to turn off the screen, and press the back button to exit the screen off state.
Bluetooth Speaker
– 12 –
Signal Source
Click the signal source icon on the homepage, choose HDMI input signal source.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
– 13 –
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
– 14 –
ISED Statement
English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux RSS exemptés de licence d’Innovation, Sciences et Développement économique Canada. L’exploitation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d’interférences. (2) Cet appareil doit accepter toute interférence, y compris les interferences susceptibles de provoquer un fonctionnement indésirable de l’appareil. l’appareil numérique du ciem conforme canadien peut – 3 (b) / nmb – 3 (b).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian Information on RF exposure and compliance. cet appareil est conforme à l’exemption des limites d’évaluation courante dans la section 2.5 du cnr – 102 et conformité avec rss 102 de l’exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l’exposition aux champs rf et la conformité.
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d’exposition aux rayonnements du Canada établies pour un environnement non contrôlé.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.
– 15 –
Documents / Resources
 |
HOTACK X3AA2 Projector [pdf] User Manual X3AA2, X3AA2 Projector, Projector |