Printing Specifications

Expanded size: 220*170mm, Folded size: 110*170mm.

Cover & Back Cover Material: 300g coated paper, matte lamination, color printing.

Inner Page Material: 128g coated paper, color printing.

Supported Streaming Services

• Netflix
• ▶️ YouTube
• Disney+
• Prime Video

Safety Instructions

1. To reduce the risk of fire or electric shock, do not expose the device to rain or moisture. Objects filled with liquids, such as vases, should not be placed on this device.
2. Do not place this device on soft surfaces such as tablecloths or carpets, otherwise the device could be a fire hazard.
3. Do not place this device in areas susceptible to excessive dust and dirt or near any appliance generating a strong magnetic field.
4. To prevent overheating, do not block or clog the ventilation holes.
5. Never place this device in a confined space. Always leave enough space around this device for ventilation.
6. Protect this device from overexposure to direct sunlight, heat, large temperature fluctuations and moisture. Avoid extreme temperatures.
7. When this device is running for a long period of time, the surface may become hot. Shut it down immediately and unplug the charger. Resume operation after this device has cooled down.
8. Always handle this device with care. Avoid touching the lens. Do not allow children to handle the device without supervision.
9. Use attachments or accessories specified by the manufacturer only.
10. Avoid extreme vibration as it may damage the internal components.

Package List

• Projector × 1
• Remote Control × 1 (Batteries are not included)
• Adapter × 1
• HDMI Cable × 1
• Projector User Manual × 1
• Clean Tool × 1

Overview

Front View:

• IR receiver

Side View:

• On / Off button

Rear View:

• 3.5mm Stereo Jack
• USB Input
• HDMI Input
• IR receiver
• Power Socket

Remote Control

Buttons:

• Power
• AI Voice
• Bluetooth Speaker
• Back
• Home
• VOL +/-
• Netflix
• Disney+
• Input
• Setting
• D-Pad with center select
• Menu
• Screen Cast
• Focus +/-
• YouTube
• Prime Video

Note: The matching interface of Bluetooth remote control, press the "Voice input" button to bring up the matching guide.

Bluetooth Remote Controller Pairing

Please keep the Remote Controller close to the Projector, press and hold the Left button and Right button for three seconds to pair.

Getting Started

1. Plug the power cable to the projector.

2. Press the power button to turn on the projector.

Use the manual focus by pressing the "Focus" button on the remote control.

Tips: Make sure the projector is horizontal to the projector screen.

Cleaning Method

1. Get the screwdriver ready and unscrew the screws.
2. Clean the projector by the cotton swab.
3. Reinstall the bottom cover after cleaning.

Network Setting

Click the Setting icon on the homepage, navigate to Setting > Network > Wi-Fi, then select "Connect to Network". Choose your desired network and type the password.

Bluetooth Setting

Click the Setting icon on the homepage, navigate to Setting > Network > Bluetooth. Select "Search for Bluetooth device", then click search and pair the device you want to connect to.

CEC Setting

Click the Setting icon on the homepage, navigate to Setting > Network > HDMI CEC > CEC. Enable CEC to control CEC-compatible devices, such as TV sticks, remotely with the projector's remote control.

Picture Setting

Click the Setting icon on the homepage, navigate to Setting > Picture. Here you can perform personalized picture settings, change picture mode, and set eye protection mode.

Sound Setting

Click the Setting icon on the homepage, navigate to Setting > Sound. Adjust the sound quality balance, sound mode, output device, and output format of the sound.

Lens Setting

Click the Setting icon on the homepage, navigate to Setting > Lens. Adjust projection direction, autofocus, keystone correction, and digital zoom.

Device Preference

Click the Setting icon on the homepage, navigate to Setting > Device Preferences. This section allows you to change language, set date and time, choose keyboard, set screen saver and sleep timer, check device information, reset projector, restart projector, manage Whale OS Cast, set energy saver, and adjust menu timer.

Whale OS Cast

Connect your phone and the projector to the same network. Navigate to Setting > Device Preference > Whale OS Cast > TV Casting. Download the TV Casting application as per the instructions. After installation, search for and click the projector device on your phone to share your screen.

Features include:

• TV Casting
• File Share
• MediaCast

App Setting

Click the Setting icon on the homepage, navigate to Setting > App Setting. Here you can view recently opened applications, all applications, and app permissions.

Voice Service

Click the Setting icon on the homepage, navigate to Setting > Voice Service. Adjust the language selection and timbre of the intelligent speech.

Software Update

Click the Setting icon on the homepage, navigate to Setting > Software Update. Update the software and view the current software information.

File Management

Insert a USB disk and click the File icon on the homepage. The contents of the USB disk, such as videos, audio, and pictures, can be read.

Bluetooth Speaker

Find the Bluetooth speaker icon on the desktop and click it to enter Bluetooth speaker mode. Search for the machine name on your mobile phone, then pair and connect. Click "Turning off the screen" to turn off the screen, and press the back button to exit the screen-off state.

Signal Source

Click the signal source icon on the homepage and choose the HDMI input signal source.

The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress, and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

ISED Statement

English: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux RSS exemptés de licence d'Innovation, Sciences et Développement économique Canada. L'exploitation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interferences susceptibles de provoquer un fonctionnement indésirable de l'appareil. l'appareil numérique du ciem conforme canadien peut - 3 (b) / nmb - 3 (b).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian Information on RF exposure and compliance.

cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la conformité.

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies pour un environnement non contrôlé.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.