HOSHIZAKI KMS-822MLJ Serenity Ice Maker Cube
Features
- Individual crescent cube
- Stainless steel evaporator
- CycleSaver TM design
- Up to 851 lbs. of ice production per 24 hours
- Durable stainless steel exterior
- Ever Check™ alert system
- No heat, less noise
- CFC / HFC Free Foam
- R-404A Refrigerant
- Not recommended for side-by-side application
- Remote unit includes both condenser and comp
Warranty:
3 Year Parts & Labor on entire machine. 5 Year Parts & Labor on Evaporator.
5 Year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for warranty in other countries.
Shipping: KMS-822MLJ (LxWxH) 31” x 28” X 34”
Volume: 17.08ft3
Specifications
| ICE PRODUCTION | WATER USAGE | ELECTRICAL | ||||||||
| Condenser | Model | Air / Water Temp Lbs. per 24 hours | Potable Gal. per 100 lbs. 90°/ 70°F | Condenser Gal. per 100 lbs 90°/ 70°F | kWh Used per 100 lbs. 90°/ 70°F | Voltage | Circuit Wires (including ground) | Refrigerant Charge Amount | Net / Ship Weight (lbs.) | |
| 70°/ 50°F | 90°/ 70°F | |||||||||
| Remote | KMS-822MLJ with SRK-10J | 851 | 770 | 21.0 | N/A | 5.3 | 208-230V/60/1* | See remote condenser | 7.1 oz. | 120 /150 |
* Voltage supply for KMS Ice Maker is supplied from the SRK Remote Condenser
| LINE SETS – Brazing Required | TEMP RANGE | ELECTRICAL | |||||||||||
| Condenser | Model | 25’ Length | 35’ Length | 55’ Length | Ambient (Outdoor Use) | Voltage Range | Min. Circuit/ Max. Fuse Size | Amperage | Voltage | Circuit Wires (including ground) | Heat Rejection BTU/hr. | Refrigerant Charge Amount | Net / Ship Weight (lbs.) |
| Remote | SRK-10J | HS-0250† | HS-0251† | HS-0252† | -20° – 122° | 187-253VAC | 20A | 11.9A | 208-230V/60/1 | 4 | 14,700 | 13 lb. 10.7 oz. | 196 /226 |
† Line sets require refrigerant.
KMEdgeTM Cube Dimensions*
§ approximate size in inches, image not to scale
Operating Limits- Kms-822mlj
- Ambient Temp Range 45 – 100°F
- Water Temp Range 45 – 90°F
- Water Pressure 10 – 113 PSIG
- Voltage Range 187-253V‡
- If GFCI is required, a GFCI breaker MUST be used in lieu of GFCI receptacle
‡ Voltage supply for KMS Ice Maker is supplied from the SRK Remote Condenser
Service- Kms-822mlj
- Allow 6” (15 cm) clearance at rear, sides, and top for proper air circulation and ease of maintenance and/or service should they be required.
- Panels easily removed and all components accessible for service.
Plumbing -Kms-822mlj
- Icemaker Water Supply Line: Minimum 1/4” Nominal ID Copper Water Tubing or Equivalent
- Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or Equivalent
Service- SRK-10J
- Allow 24” (61 cm) clearance in both front and rear for proper air circulation and ease of maintenance/service.
- For best performance the Remote Condenser should not be more than 33 feet above the icemaker or no more than 10 feet below it. These distances are measure from fitting to fitting.
Dimension
FRONT VIEW
REMOTE AIR-COOLED
SRK-10J REMOTE CONDENSER
SIDE VIEW
REMOTE AIR-COOLED
SRK-10J REMOTE CONDENSER
REAR VIEW
REMOTE AIR-COOLED
TOP VIEW
BOTTOM VIEW
REMOTE AIR-COOLED
SRK-10J Remote Condenser (Sold Separately)
35 3/4” x 23 1/2” x 37” (W x D x H with legs)
For Use with KMS-822MLJ
Brazed Line Sets
(Sold Separately)
25’ HS-0250
35’ HS-0251
55’ HS-0252
Voltage supply for the KMS Ice Maker is supplied from the SRK Remote Condenser.
Modular Head Unit WxDxH
22″ x 245/8 x 28″
Remote Unit Dimension SRK-10J
353/4″ x 231/2″ x 22″
Installation Dimension* SRK-10J
38″ x 29″ x 37″
*Dimensions include legs
Customer Support
© HOSHIZAKI AMERICA, INC. 618 Hwy, 74 S., Peachtree City, GA 30269
| TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
Documents / Resources
 |
HOSHIZAKI KMS-822MLJ Serenity Ice Maker Cube [pdf] Owner's Manual KMS-822MLJ, KMS-822MLJ Serenity Ice Maker Cube, Serenity Ice Maker Cube, Ice Maker Cube, Maker Cube |
