UserManual
BLOCKCHAINCOMPUTER
DEVICE
XKFamilyLineUp
XK Family Line Up Blockchain Computer Device
SCAN QR CODE TO GET STARTED
Product Overview & Specifications
Overview:
The Blockchain Computer Device is a high-performance computing device that empowers users with the ability to participate in blockchain network activities and experience rewards. With its compact physical design and simplified user interface, the Blockchain Computer Device is your gateway to the vast and growing digital asset space.
Basic Safety & Maintenance
- Electrical Safety: Only use the power cable provided in the box to power your device and connect it only to compatible power sources. Check electrical specifications to ensure device compatibility.
- Ventilation: Ensure the device’s vents are not blocked to prevent overheating.
- Liquid Exposure: Keep the device away from liquids to avoid damage.
- Cleaning: Clean the device with a soft, dry cloth regularly to prevent the accumulation of dust outside and inside the device.
- Caution: Do not use chemical cleaners, as these mightdamage the finishing on the surface of the device.
| XK 500 | XK 1000 | XK 5000 | XK 10000 | XK Validator | |
| Device Proportions | 14 x 13 x 6 cm | 14 x 13 x 6 cm | 16x 14x 8 cm | 20x 15x 10 cm | 20x 15x 10 cm |
| Finishing | Premium Plastic Case | Aluminum Case | Aluminum Case | Aluminum Case | Black Aluminum Case |
| Connectivity | 2.4Ghz/ 5Ghz | 2.4Ghz/ 5Ghz | 2.4Ghz/ 5Ghz | 2.4Ghz/ 5Ghz | 2.4Ghz/ 5Ghz |
| Ports | I WAN Port 1 LAN Port |
1 WAN Port I LAN Port |
I WAN Port I LAN Port |
I WAN Port I LAN Port |
I WAN Port I LAN Port |
| Power | External I2V Power Adapter |
External 12V Power Adapter |
110-220V | 110-220V | 110-220V |
| Processor | MTK | MTK | Intel!) Co”reTI iS Processor | Intel!) Core”‘ i5 Processor | Intel!) Core”‘ i7 Processor |
Setup Instructions:
1. Unbox and Inspect:
1.2. Open the box and ensure that all the items listed in Section 3 [What’s in the Box] are present and in brand-new condition*
1.3. Locate the serial number on the back of the device and note it down for later steps
2. Connect to Power:
2.1. Plug the appropriate end of the power cable to your Blockchain Computer Device
2.2. Connect the other end to a power outlet
3. Network Connection:
3.1. Take the Ethernet cable from the box .
3.2. Plug the blue color-coded end of the cable into the WAN port of your device
3.3. Plug the yellow color-coded end of the cable into a free port on your WiFi router
3.4. Wait approximately 15-30 minutes for the device to activate
3.5. A green indicator in front of your device will light up to let you know that you have connected to the network successfully
4. Scan the QR Code Below
4.1. Continue your user setup by scanning the QR code below:
Should you have factory-related issues with your brand-new device, please do not hesitate to raise a ticket at https://support.horystech.com/support/home.
What’s Inside the Box:
- Blockchain Computer Device
- Ethernet cable
- Power cable
- Product manual with QR code linked to our web-based digital product guide
Product Visualization:
5000/ 10000/ Validator Set
500/1000 Set
FAQs:
1. How does the product connect to the network?
- The device requires an internet connection via an ethernet cable to your router.
2. Can I connect multiple devices in a business setting?
- Yes, as long as you have vacant internet ports. Independent IP addresses are not necessary.
3. Can I gift the device to another user?
- Each device is linked to the order ID and is non-transferable.
Contact Information
Customer Support Hub:
https://support.horystech.com/support/home
Support Email: support@horystech.com
General Queries Email: info@horystech.com
Website: https://horystech.com/
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Documents / Resources
 |
horys XK Family Line Up Blockchain Computer Device [pdf] User Manual XLFI10000, XK 500, XK 1000, XK 5000, XK 10000, XK Validator, XK Family Line Up Blockchain Computer Device, XK Family Line Up, XK Family Line Up Computer Device, Blockchain Computer Device, Computer Device, Device |