HOGAR TURBO Smart Controller Instruction Manual

HOGAR-LOGO

HOGAR TURBO Smart Controller

HOGAR-TURBO-Smart-Controller-PRODUCT

Product Usage Instructions

Usage Notice

Warnings and Considerations
Handle and install the Hogar TURBO with care to avoid damage to its complex components. If uncertain, consult a Certified Electrician for installation. Ensure proper distance between devices, consider home layout, and wall obstructions for optimal wireless control system performance.

Precautions

To ensure product longevity and performance:

  • DOs:
    • TURN OFF before cleaning.
    • Clean with a soft dry cloth.
  • DON’Ts:
    • Avoid dropping or disassembling.
    • Avoid contact with sharp objects.
    • Avoid painting the product.
    • Avoid using abrasive cleaners, waxes, or solvents.
    • Avoid operating in extreme conditions or near strong magnetic fields.

Product Details

Description
The Hogar TURBO facilitates network connection and communication among devices, allowing control of smart home devices locally or via the cloud using the Hogar Pro S app.

Features

  • Plug and play installation in 2 minutes.
  • Supports over 232 smart home Z-Wave devices.
  • Cloud Backup and restore feature for configuration customization.
  • Controlled through the Hogar Pro S App.
  • Create personalized Rules, Schedules, and Scenes.
  • Monitor event history.
  • Supports IR device control (TV/AC/Set-top box).
  • Accessible locally and remotely.

Note: For optimal performance, place the Hogar TURBO five feet above the ground level vertically.

Technical Specifications
[Insert Technical Specifications here]

FAQ

Q: How many Z-Wave devices can the Hogar TURBO support?
A: The Hogar TURBO can support over 232 Z-Wave devices per controller for seamless smart home integration.

Q: Can the Hogar TURBO be controlled remotely?
A: Yes, the Hogar TURBO can be accessed both locally and remotely through the Hogar Pro S app, allowing you to manage your smart home devices from anywhere.

WELCOME TO THE HOGAR IOT WORLD

Welcome to Hogar Controls© World of Smart IoT Solution for Smart Spaces. Thank you for trusting us with your space & choosing Hogar TURBO.
This manual is designed to help you install your Hogar TURBO in an easy and hassle-free manner. Please follow all the steps given below and experience the safety and comfort of your very own, personal smart space.

USAGE NOTICE

WARNINGS AND CONSIDERATIONS

Caution symbols highlighted across the manual represent the following:

HOGAR-TURBO-Smart-Controller-FIG-3 Indicates the highlighted precautions to be followed to prevent any high level of severity.
HOGAR-TURBO-Smart-Controller-FIG-4 Indicates the instructions to be followed during installation.
HOGAR-TURBO-Smart-Controller-FIG-5 Indicates suggestions and tips

Please follow the notices to ensure your safety as well as to prevent property loss.

  • Ensure that the product is always DRY.
  • Install this device by following the socket type mentioned.
  • Using this product in any manner other than how it is referred to in this document VOIDS your warranty Further, Hogar Controls is NOT liable for any damage incurred due to the misuse of the product.
  • Avoid pressing hard on the device body, reset button, and connecting ports.
  • This is an electronic device with complex components.
  • Handle and install with care!
  • If you are not sure about any part of these instructions,please consult a Certified Electrician to perform the installation process.
  • Kindly take into consideration the following as the range and performance of the wireless control systems are highly dependent on them:
    • Distance between the devices.
    • The layout of a home.
    • Walls separating the devices

PRECAUTIONS
Ensure the below DOs & DON’Ts are followed to enjoy a seamless product experience:

DOs

  • TURN OFF the product before cleaning.
  • Clean the product with a soft dry cloth.

DON’Ts

  • DON’T drop or disassemble the device.
  • DON’T touch the device with sharp or hard objects.
  • DON’T paint the product.
  • DON’T use abrasive cleaners, waxes, or solvents for cleaning the product.
  • DON’T operate the product under the following conditions:
    • Sweltering hot, cold, or humid environment.
    • Areas that are open to excessive dust and dirt.
    • Close to any device that produces strong magnetic fields.
    • Areas where the device may be exposed to direct sunlight.

DESCRIPTION

Hogar TURBO can connect devices to a network and control communication among them, it allows you to control your smart home devices which are connected either locally or from the cloud using Hogar Pro S mobile application.

Hogar Pro S app enables you to receive alerts and notifications about your connected devices and run them remotely with your mobile device. Hogar TURBO receives commands from the app and sends them to other devices, while sending important alerts to your mobile device when some action occurs.

FEATURES

  • Plug and play in 2 minutes.
  • Can connect to 232+ smart home Z-Wave devices
  • It has a Cloud Backup and restores the configuration every time you customize.
  • It is controlled through the Hogar Pro S App.
  • It helps you create and run personalized Rules, Schedules and Scenes.
  • It lets you monitor history of events.
  • It supports IR device control (TV/AC/Set-top box)
  • It can be accessed both locally and remotely.

NOTE: For optimal performance, place Hogar TURBO five feet above the ground level vertically.

TECHNICAL SPECIFICATIONS

HOGAR-TURBO-Smart-Controller-FIG-6

HOGAR-TURBO-Smart-Controller-FIG-7

APP REGISTRATION / LOGIN

Sign Up:

  • Open the Hogar Pro S App
  • You can either sign up with your mobile number or email id.
  • Enter a password of your choice and click “Register”.
  • You will receive an OTP which is valid for 10 mins. Enter the OTP and sign up.

Sign In:

  • Sign into the App by entering the registered email address and password in the allocated fields.
  • Hit the “Login” button to complete the process.

Forgot Password:

  • If you have forgotten the password, you can reset it by selecting “Forgot Password”.
  • Enter your email id/Mobile number to receive a password reset OTP.

Change Password:

  • Go to “My Account” & Click on “Password Change.”
  • Give your current password and type your new password in the allocated fields.

CONFIGURATION PROCESS

Adding Hogar TURBO to Hogar Pro S App:

Configuration of Turbo

  • Click on “Add Home” or Tap on the “+” button on the top right corner of the screen.
  • Enter the following details: Home name, Domain (Unique without space & special characters), Address and tap on save..
  • Select the “Home” and click on “Confirm”.
  • Click on “Your HC has not connected to internet” and click on “Next”.
  • It will redirect to Wi-Fi Settings page, connect to the device Hotspot (starts as HOGARHC_).
  • Go back to the app and click “Yes, I connected”.

CONNECTING TURBO TO INTERNET

Configuration of TURBO

  • Choose the Wi-Fi, give the password.
  • You can choose DHCP/ STACTIC IP configuration.
  • If Static config, make sure to fill the following details and click on “Continue”.
    • IP: XXX.XXX.XXX.XXX
    • Gateway: XXX.XXX.XXX.XXX
    • DNS: 8.8.8.8, Better to use default DNS.
  • If DHCP, click on “Continue”.
  • It will show Successfully configured, details and click on “Continue”.
  • Connect your phone to the internet and go back to the mobile App, click on “OK”.
  • Wait until Hogar TURBO gets reboot.

Choose LAN configuration. Hogar TURBO does not support 3G/4G configuration.

  • You can choose DHCP/ STACTIC IP configuration.
  • If Static config, make sure to fill the following details and click on “Continue”.
    • IP: XXX.XXX.XXX.XXX
    • Gateway: XXX.XXX.XXX.XXX
    • DNS: 8.8.8.8, Better to use default DNS.
  • If DHCP, click on “Done”
  • Once Successfully configured,. Check the details and click on “Continue”.
  • Connect your phone to internet and go back to mobile App,click on “OK”.
  • Wait until Hogar TURBO gets rebooted.

SETTING SMART HOME TO HOGAR TURBO

SETUP YOUR ROOMS
Adding Rooms to your Hogar Pro S App:

  • Tap on the selected Floor and tap the “+” button in the top right corner of the screen.
  • Add the ‘Room details’ and type in the Room Name.
  • Assign a photo by allowing Hogar Pro S App to click pictures by tapping ‘’Allow’’.
  • The created Floors appear as a list.

Deleting your Room:

  • Go to General → Floor & Room → Select Floor → Select Room
  • Click “Delete Room” to delete the Room.

SETUP FOR YOUR FLOORS
Adding Floors to your Hogar Pro S App:

  • Go to Settings → General → Config Room & Floor. Tap ‘+’ button in the top right corner.
  • Name the “Floor”.
  • Tap “Done”. You can always edit the Floor details by tapping on the “Edit” button.

Deleting your Floor:

  • Left swipe on the designated Floor.
  • Tap “Delete” & Enter your Login Password.

MAPPING EXISTING CONNECTED DEVICES TO YOUR ROOM

Adding Devices to your Room:

  • Select “Devices”.
  • Select the devices from General → Setup Devices → New → Select the devices → Add to Room → Select the Room

SETUP FOR MULTIPLE HCs
Hogar TURBO allows multiple controllers on the same network.
There is only one primary Home Controller which can act as Master and the rest as Slave controllers. Slave controllers also communicate with devices directly connected to it.

Adding Multiple Slave Controllers:

  • Login to Account → Go to Settings → Info HC → Slave List – Add – Configure HC
  • You will receive a pop-up notification displaying stating ‘’Device Added’’

Deleting Multiple Controllers:

  • Select the specific Slave controller.
  • Click the drop down on the right, next to the HC device & tap ‘’Remove Device’’.

ADDING/ DELETING SMART DEVICES TO YOUR HOGAR TURBO

SETUP FOR Z-WAVE SMART DEVICES

Adding Smart Devices:

  • Scroll through the Hogar Pro S App, choose Z-Wave to “Add” devices.
  • You will receive a pop-up notification display stating “Device Added”

Deleting Smart Devices:

  • Scroll through the Hogar Pro S App, choose Z-Wave to “Remove” devices.
  • You will receive a pop-up notification display stating “Device Removed”

AUTOMATING & CONTROLLING YOUR SMART DEVICES

RULES
Rules can trigger activities based on the device’s environment.
i.e. if a certain condition occurs, then an action should take place. With Rules, the user can configure modes, combine conditions and check the absence of a condition.

Add a Rule:

  • Go to Settings → Rule → click + at the extreme right on the top bar
  • Enable or Disable security: Allows the rule to be added into security and there will be a notification before rule is active.
  • Set Timer for Rule: Enable Timer and Scroll through the timer,choose a time between 0 and 23 hours and 0 to 59 minutes and click on “Confirm” to save.
  • Add input/output devices: Add the input and output devices to Hogar TURBO.

Enable & disable notification:

  • Go to Setting → General → Rule → Select Rule → Notification → Enable or disable.

Edit Existing Rule:

  • Tap on the specific rule from the list and change the data according to the need.

Delete a Rule:

  • Go to Settings → General → Rule → Select the Rule → Scroll to bottom → click on Delete Rule

SCENES
Scenes help you let the various smart devices talk to each other based on certain pre-set conditions set by you. Normally, various smart sensors can be automated through scenes to trigger your smart switches. No manual intervention or internet connectivity is required once certain scenes are set by you on your Hogar Pro S App.

Add a Scene:

  • Go to scenes.
  • Tap the “+” button in the top right corner of the screen.
  • Add scenes to the room by selecting the “Room” in the scene.
  • Tap “Done” on the top right corner when you are done with creating the scene.

Setting up a Scene:

  • Tap “Scene Name” to name the Scene.
  • Select the devices from the rooms and floors by clicking “Add Devices”.
  • Select Icon based on the purpose.
  • Enable Timer and Scroll through the timer, choosing a time between 0 and 23 hours and 0 to 59 minutes and click “Confirm” to save.
  • Add content based on the requirement.
  • You can repeat the scene on any day of the week or choose “None” and Tap “Done”.
  • Select “Remind” for a notification to pop-up.
  • Select “Room” & Tap “Done”

Edit Existing Scene:

  • Tap on a specific scene from the list, and change the data accordingly and tap “Done”.

Delete a Scene:

  • Go to Settings → General → Scene → Select the Scene → Scroll to bottom → Click on Delete Scene

GROUPS
Using this functionality, you can Group devices of the same type i.e Switches grouping, RGBW grouping, Light dimmer, Fan speed control.

Add a Group:

  • Choose a suggested Group or create a new one by tapping the “+” icon.
  • Name the group.
  • Select the device you want to add to the group or select the group to which the devices should be added, and tap “Done”.

Delete a Group:

  • Go to Settings → General → Group → Select the Group → Scroll to bottom → Click on Delete Group

SCHEDULE
To view the list of schedules, go to Settings → General → Schedules

Add a Schedule:

  • Go to Settings → General → Schedules → Click “+” → Choose devices → Done

Delete a Schedule:

  • Go to Settings → General → Schedules → Select the Schedule → Scroll to bottom → Click on Delete

RESETTING INFORMATION

Network and Factory reset (Using reset button)

LED Indication for Network reset:

  • Press and hold the reset button until the LED changes colors from red – yellow – white – magenta; release the button (Magenta blinks)
  • Press and hold the reset button until magenta becomes stable.

LED Indication for Factory reset:

  • Press and hold the reset button until the LED changes colors from red – yellow – white – magenta; release the button (Magenta blinks)
  • Click the reset button to change the color from magenta to blue
  • Press and hold the reset button until blue becomes stable.

Warranty

Hogar offers an Exclusive 18-Month Warranty on any product that covers defects in materials and quality under normal use of the Product. The Terms and Conditions of this 1.5 YEARS LIMITED WARRANTY can be viewed on www.hogarcontrols.com or scan the QR code:

HOGAR-TURBO-Smart-Controller-FIG-2

CONGRATULATIONS
You’ve successfully installed & Configured Hogar TUBRO. Now you can experience seamless control of home with Hogar Pro S Application

Add more smart home devices to your home from our range of smart home solutions and live a smart life.

USA
Hogar Controls Inc, 46040 Center Oak Plaza,Suite 125, Sterling, Virginia 20166 | Phone : +1 703 844 1160

INDIA
Sandhya Techno-1, Khajaguda X Road,Radhe Nagar, Rai Durg, Hyderabad
Telangana 500081 | Phone : +91 844 844 0789

HOGAR-TURBO-Smart-Controller-FIG-1

support@hogarcontrols.com

www.hogarcontrols.com

Documents / Resources

PDF thumbnailTURBO Smart Controller
Instruction Manual · TURBO Smart Controller, TURBO, Smart Controller, Controller

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.