hoco EQ20 ANC Plus ENC TWS Headset
Headset overview
How to use
After opening the charging case, the headset will automatically turn on, and the left and right headsets will automatically complete pairing. Tum on BT on your phone and search for the BT device •Hoco EQ20″. You need to manually connect the device for the first time, and a prompt tone will sound after successful connection.- Place the headset in the charging case and close the charging case lid to shut down.
- connect two mobile phones at the same bme: after the headset ‘HDCO E020″ is connected to the first mobile phone, turn off the BT of the first mobile phone, turn on the BT of the second mobile phone to connect to this headset, after the connection is successful turn on the BT of the first mobile phone, click “HOCO E020” to connect, this way you can connect two mobile phones at the same time.
Operation method
Product parameters
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any Interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
Note This equipment has been tested and rounded to comply with the limits for a Class B digital device, pursuant to part 1 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver
- connect the equipment into an outlet on a Circuit different from that to which the receiver is connected,
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
WARRANTY
- HOCO- provides 1 year warranty from the date of purchase for the workmanship, all parts of the product and materials. This warranty should be effective only if the warranty card is fully completed and mailed to the authorized dealers for registration.
- The consumers return the defective product to the authorized dealers in their country for repair or replacement after getting a response to the completed warranty card from the authorized dealers
- This warranty is null and void If the unit or components therein have been damaged by Improper handling, use or unauthorized repair In all cases of damage during shipping, for repair, a claim must be filled by the purchaser and the shipping carrier, not by hoco. In all cases, the manufacturer agree to repair or replace the defective parts but never to exceed the purchase price. As this is a limited warranty, hoco’s liability for consequential and incidental damages expressly disclaimed and shall not exceed the purchase price paid.
- Please keep this warranty card and valid purchase product certificate as a necessary certificate for warranty service. Please do not modify the content without authorization, otherwise, it will be deemed Invalid. The company reserves the right to interpret the product after-sales service regulations.
Documents / Resources
 |
hoco EQ20 ANC Plus ENC TWS Headset [pdf] Instruction Manual EQ20, EQ20 ANC Plus ENC TWS Headset, ANC Plus ENC TWS Headset, ENC TWS Headset, TWS Headset, Headset |