UNITRONICS V120-22-T2C HMI Display Unit

Kev piav qhia dav dav

Cov khoom uas teev saum toj no yog micro-PLC + HMIs, rugged programmable logic controllers uas suav nrog cov vaj huam sib luag ua haujlwm.

Cov lus qhia ntxaws txog kev teeb tsa uas muaj I / O cov kab kos duab rau cov qauv no, cov kev qhia tshwj xeeb, thiab cov ntaub ntawv ntxiv muaj nyob hauv Technical Library hauv Unitronics webqhov chaw: https://unitronicsplc.com/support-technical-library/

Cov cim ceeb toom thiab cov kev txwv dav dav

Thaum ib qho ntawm cov cim hauv qab no tshwm sim, nyeem cov ntaub ntawv cuam tshuam kom zoo.

Cim	Lub ntsiab lus	Kev piav qhia
	Kev phom sij	Qhov xwm txheej uas raug txheeb xyuas ua rau lub cev thiab khoom puas tsuaj.
	Ceeb toom	Qhov xwm txheej uas raug txheeb xyuas tuaj yeem ua rau lub cev thiab khoom puas tsuaj.
Ceev faj	Ceev faj	Ceev faj.

• Ua ntej siv cov khoom no, tus neeg siv yuav tsum nyeem thiab nkag siab cov ntaub ntawv no.
• Txhua tus examples thiab daim duab kos yog npaj los pab kev nkag siab, thiab tsis lav kev ua haujlwm.
  Unitronics lees txais tsis muaj lub luag haujlwm rau kev siv tiag tiag ntawm cov khoom no raws li cov examples.
• Thov muab cov khoom no pov tseg raws li cov qauv hauv zos thiab lub tebchaws thiab cov kev cai.
• Tsuas yog cov neeg ua haujlwm tsim nyog yuav tsum qhib lub cuab yeej no lossis ua haujlwm kho.
• Kev tsis ua raws li cov lus qhia txog kev nyab xeeb tsim nyog tuaj yeem ua rau raug mob hnyav lossis khoom puas tsuaj.
• Tsis txhob sim siv cov cuab yeej no nrog cov kev txwv uas dhau qib tso cai.
• Txhawm rau kom tsis txhob ua rau lub cev puas tsuaj, tsis txhob txuas / txiav lub cuab yeej thaum lub hwj chim qhib.

Environmental Considerations

• Tsis txhob nruab rau hauv cov cheeb tsam uas muaj: ntau dhau los yog cov plua plav, corrosive lossis flammable gas, ya raws lossis nag, cua sov ntau dhau, kev cuam tshuam tsis tu ncua lossis kev co ntau dhau, raws li cov qauv muab hauv cov ntawv qhia tshwj xeeb ntawm cov khoom.
• Tsis txhob muab tso rau hauv dej los yog cia dej ntws mus rau hauv chav tsev.
• Tsis txhob cia cov khib nyiab poob rau hauv chav tsev thaum lub sijhawm teeb tsa.
• Qhov cua: 10mm qhov chaw yuav tsum tau nruab nrab ntawm tus tswj lub sab saum toj / hauv qab ntug & cov phab ntsa thaiv.
• Nruab ntawm qhov siab tshaj plaws ntawm qhov siab-voltage cables thiab khoom siv fais fab.

Mounting

Nco ntsoov tias cov duab tsuas yog siv rau kev piav qhia xwb.

Qhov ntev

Qauv	Txiav tawm	View cheeb tsam
v 120	92 × 92 hli (3.622 "x 3.622")	57.5 × 30.5 hli (2.26 "x 1.2")
M91	92 × 92 hli (3.622 "x 3.622")	62 × 15.7 hli (2.44 "x 0.61")

Vaj Huam Sib Luag Mounting

Ua ntej koj pib, nco ntsoov tias lub vaj huam sib luag mounting tsis tuaj yeem yog ntau tshaj 5 hli tuab.

1. Ua ib lub vaj huam sib luag txiav tawm ntawm qhov tsim nyog loj:
2. Xaub tus maub los rau hauv qhov txiav tawm, xyuas kom meej tias cov roj hmab foob nyob hauv qhov chaw.
3. Thawb lub mounting brackets rau hauv lawv cov slots ntawm ob sab ntawm lub vaj huam sib luag raws li qhia hauv daim duab hauv qab no.
4. Tighten bracket's screws tiv thaiv lub vaj huam sib luag. Tuav lub bracket kom ruaj ntseg tiv thaiv lub tsev thaum tuav lub hau ntswj.
5. Thaum zoo mounted, tus maub los yog squarely situated nyob rau hauv lub vaj huam sib luag txiav tawm raws li qhia nyob rau hauv cov duab nrog.
   

DIN-rail Mounting

1. Snap tus maub los rau ntawm DIN rail raws li qhia hauv daim duab rau sab xis.
   
2. Thaum txhim kho kom zoo, tus maub los yog squarely nyob rau ntawm DIN-rail raws li qhia hauv daim duab mus rau sab xis.
   

Kev xaim

• Tsis txhob kov cov xov hlau nyob.
• Cov cuab yeej no yog tsim los ua haujlwm hauv SELV/PELV/Class 2/Limited Power ib puag ncig.
• Tag nrho cov khoom siv hluav taws xob hauv qhov system yuav tsum muaj ob chav rwb thaiv tsev. Cov khoom siv hluav taws xob yuav tsum raug ntsuas raws li SELV / PELV / Class 2 / Limited Power.
• Tsis txhob txuas 'Neutral lossis 'Line' teeb liab ntawm 110/220VAC rau ntaus ntawv 0V tus pin.
• Tag nrho cov haujlwm txuas yuav tsum tau ua thaum lub hwj chim kaw.
• Siv cov kev tiv thaiv dhau tam sim no, xws li lub fuse lossis Circuit Court breaker, kom tsis txhob muaj cov khoom siv hluav taws xob ntau dhau mus rau hauv cov khoom siv hluav taws xob sib txuas.
• Cov ntsiab lus uas tsis siv yuav tsum tsis txhob txuas nrog (tshwj tsis yog hais qhia lwm yam). Tsis quav ntsej cov lus qhia no yuav ua rau lub cuab yeej puas.
• Muab ob npaug rau txhua txoj hlua khi ua ntej qhib lub hwj chim

Ceev faj

• Txhawm rau kom tsis txhob puas cov hlau, tsis txhob tshaj qhov siab tshaj plaws torque ntawm:
  • Controllers muab lub davhlau ya nyob twg thaiv nrog lub suab ntawm 5 hli: 0.5 N·m (5 kgf·cm).
  • Controllers muab lub davhlau ya nyob twg thaiv nrog suab ntawm 3.81mm f 0.2 N·m (2 kgf·cm).
• Tsis txhob siv tin, solder, los yog tej yam khoom ntawm stripped hlau uas yuav ua rau cov hlau strand tawg.
• Nruab ntawm qhov siab tshaj plaws ntawm qhov siab-voltage cables thiab khoom siv fais fab.

Cov txheej txheem thaiv

Siv crimp terminals rau kev xaim;

• Controllers muab lub davhlau ya nyob twg thaiv nrog suab ntawm 5 hli: 26-12 AWG hlau (0.13 mm2 – 3.31 mm2).
• Controllers muab lub davhlau ya nyob twg thaiv nrog suab ntawm 3.81mm: 26-16 AWG hlau (0.13 mm2 - 1.31 mm2).

1. Tshem cov hlau mus rau qhov ntev ntawm 7 ± 0.5mm (0.270–0.300”).
2. Unscrew lub davhlau ya nyob twg mus rau nws txoj hauj lwm widest ua ntej ntxig ib tug hlau.
3. Ntxig cov hlau tag nrho rau hauv lub davhlau ya nyob twg kom ntseeg tau tias muaj kev sib txuas zoo.
4. Tighten txaus kom cov hlau tsis txhob rub tawm.

Cov Txheej Txheem Txuas Txuas

• Siv cov ducts cais rau txhua pawg hauv qab no:
  • Pawg 1: Low voltage I / O thiab cov kab xa khoom, kab sib txuas lus.
  • Pawg 2: High Voltage Kab, Low voltage suab nrov zoo li lub cev muaj zog tsav tawm.
    Cais cov pab pawg tsawg kawg yog 10cm (4 "). Yog tias qhov no ua tsis tau, hla cov ducts ntawm 90˚angle.
• Rau kev ua haujlwm kom zoo, tag nrho 0V cov ntsiab lus hauv qhov system yuav tsum tau txuas nrog lub kaw lus 0V muab kev tsheb ciav hlau.
• Cov ntaub ntawv tshwj xeeb ntawm cov khoom lag luam yuav tsum tau nyeem thiab nkag siab ua ntej ua cov xaim.
  Cia rau voltage poob thiab suab nrov cuam tshuam nrog cov kab lus nkag siv dhau qhov kev ncua deb.
  Siv cov xaim uas yog qhov loj me rau lub nra.

Earthing cov khoom

Txhawm rau ua kom lub cev ua haujlwm tau zoo, zam kev cuam tshuam ntawm electromagnetic raws li hauv qab no:

• Siv lub txee hlau.
• Txuas lub 0V thiab cov ntsiab lus hauv av (yog tias muaj) ncaj qha rau hauv av hauv av ntawm qhov system.
• Siv qhov luv tshaj plaws, tsawg dua 1m (3.3 ft.) thiab thickest, 2.08mm² (14AWG) min, xaim tau.

Ua raws li UL

Cov ntu hauv qab no yog qhov cuam tshuam rau Unitronics cov khoom uas tau teev nrog UL.
Cov qauv hauv qab no: V120-22-T1, V120-22-T2C, V120-22-UA2, V120-22-UN2, M91-2-R1, M91-2-R2C, M91-2-R6, M91-2- R6C, M91-2-T1, M91-2-T2C, M91-2-UA2, M91-2-UN2 yog UL teev rau qhov chaw muaj phom sij.

The following models: V120-22-R1, V120-22-R2C, V120-22-R34, V120-22-R6, V120-22-R6C, V120- 22-RA22, V120-22-T1, V120-22-T2C, V120-22-T38, V120-22-UA2, V120-22-UN2, M91-2-FL1, M91-2- PZ1, M91-2-R1, M91-2-R2, M91-2-R2C, M91-2-R34, M91-2-R6, M91-2-R6C, M91-2-RA22, M91-2-T1, M91-2-T2C, M91-2-T38, M91-2-TC2, M91-2-UA2, M91-2-UN2, M91-2-ZK, M91-T4-FL1, M91-T4-PZ1, M91-T4-R1, M91-T4-R2, M91-T4-R2C, M91-T4-R34, M91-T4-R6, M91-T4-R6C, M91-T4-RA22, M91-T4- T1, M91-T4-T2C, M91-T4-T38, M91-T4-TC2, M91-T4-UA2, M91-T4-UN2, M91-T4-ZK are UL listed for Ordinary Location.

Rau cov qauv los ntawm series M91, uas suav nrog "T4" nyob rau hauv lub npe qauv, Tsim nyog rau mounting ntawm lub tiaj tiaj ntawm hom 4X enclosure.
Rau exampQauv: M91-T4-R6

UL Ordinary Qhov Chaw

Yuav kom ua tau raws li UL tus qauv qhov chaw zoo tib yam, vaj huam sib luag-mount cov cuab yeej no rau ntawm qhov chaw tiaj tus ntawm Hom 1 lossis 4 X enclosures

UL Ratings, Programmable Controllers rau siv nyob rau hauv tej qhov chaw txaus ntshai, Chav I, Division 2, Pawg A, B, C thiab D

Cov Lus Qhia Tshaj Tawm no muaj feem xyuam rau tag nrho cov khoom siv Unitronics uas muaj cov cim UL siv los cim cov khoom uas tau pom zoo siv rau hauv cov chaw muaj kev phom sij, Chav Kawm I, Division 2, Pawg A, B, C thiab D.

Ceev faj

• Cov cuab yeej no tsim nyog siv rau hauv Chav Kawm I, Division 2, Pawg A, B, C thiab D, lossis cov chaw tsis muaj kev phom sij nkaus xwb.
• Kev tawm tswv yim thiab kev xaim xaim yuav tsum ua raws li Chav Kawm I, Division 2 txoj kev xaim hluav taws xob thiab ua raws li txoj cai muaj cai.
• CEEB TOOM—Kev puas tsuaj tawg-kev hloov ntawm cov khoom yuav ua rau tsis zoo rau chav kawm I, Division 2.
• CEEB TOOM – EXPLOSION HAZARD – Tsis txhob txuas lossis txiav cov khoom siv tshwj tsis yog tias lub hwj chim tau raug kaw lossis thaj chaw paub tias tsis muaj kev phom sij.
• CEEB TOOM - Kev raug rau qee yam tshuaj tuaj yeem ua rau cov khoom sib khi ntawm cov khoom siv hauv Relays.
• Cov cuab yeej no yuav tsum tau nruab nrog txoj kev xaim raws li qhov xav tau rau Chav Kawm I, Division 2 raws li NEC thiab / lossis CEC.

Vaj Huam Sib Luag-Mounting
Rau programmable controllers uas tuaj yeem ntsia tau rau ntawm vaj huam sib luag, txhawm rau ua kom tau raws li UL Haz Loc tus qauv, vaj huam sib luag-mount cov cuab yeej no rau ntawm qhov chaw tiaj tus ntawm Hom 1 lossis Hom 4X enclosures.

Relay Output Resistance Ratings

Cov khoom lag luam hauv qab no muaj cov khoom siv hluav taws xob relay:
Programmable controllers, Models: M91-2-R1, M91-2-R2C,M91-2-R6C, M91-2-R6

• Thaum cov khoom tshwj xeeb no tau siv rau hauv qhov chaw txaus ntshai, lawv raug ntsuas ntawm 3A res.
• thaum cov khoom tshwj xeeb no tau siv rau hauv cov khoom tsis muaj kev phom sij, lawv raug ntsuas ntawm 5A res, raws li tau muab rau hauv cov khoom specifications.

Qhov kub thiab txias
Programmable Logic Controllers, Qauv, M91-2-R1, M91-2-R2C, M91-2-R6C.

• Thaum cov khoom tshwj xeeb no tau siv rau hauv qhov chaw muaj kev phom sij, lawv tsuas yog siv nyob rau hauv qhov kub ntawm 0-40ºC (32-104ºF).
• Thaum cov khoom tshwj xeeb no tau siv rau hauv ib puag ncig tsis muaj kev phom sij, lawv ua haujlwm hauv thaj tsam ntawm 0-50ºC (32- 122ºF) muab rau hauv cov khoom tshwj xeeb.

Tshem tawm / Hloov lub roj teeb

Thaum cov khoom lag luam tau teeb tsa nrog lub roj teeb, tsis txhob tshem tawm lossis hloov lub roj teeb tshwj tsis yog tias lub hwj chim tau raug kaw, lossis cheeb tsam paub tias tsis muaj kev phom sij.

Thov nco ntsoov tias nws raug pom zoo kom thaub qab tag nrho cov ntaub ntawv khaws cia hauv RAM, txhawm rau kom tsis txhob poob cov ntaub ntawv thaum hloov lub roj teeb thaum lub hwj chim raug kaw. Cov ntaub ntawv hnub thiab sijhawm yuav tsum tau rov pib dua tom qab tus txheej txheem.

Graphic Operator Vaj Huam Sib Luag & Programmable Logic Controller

12/24VDC, 12 pnp/npn digital inputs, 2 analog inputs, 3 high-speed counter/shaft encoder inputs, 12 transistor outputs, 1/0 expansion port, RS232/RS485 plus CANbus

Nco tseg:

1. Tag nrho 12 inputs tuaj yeem teeb tsa rau pnp (qhov chaw) lossis l'l)n (lub dab dej) ntawm slngle jumper thiab xaim tsim nyog.
2. Inputs #10 thiab #11 tuaj yeem ua haujlwm raws li cov khoom siv digital lossis analog inputs, ntawm ib leeg jumper thiab xaim tsim nyog.
3. Tag nrho 12 lub tswv yim tuaj yeem lom zem::tion hauv 12 voe lossis 24 VDC; teem los ntawm ib tug jumper thiab tsim nyog thaiv.
4. npn (sink) inputs siv voltage muab los ntawm tus tswj lub hwj chim suppty.
5. Cov tswv yim # 0, # 2 thiab # 4 tuaj yeem ua haujlwm raws li qhov ntsuas kub ceev lossis ua ib feem ntawm tus ncej encoder. Nyob rau hauv txhua rooj plaub, highspeed Input specifications siv. Thaum siv raws li ib txwm digital input, ib txwm input specifications siv.
6. Cov tswv yim # 1 , # 3 thiab # 5 cane ~ ua haujlwm raws li lub txee rov pib dua, lossis raws li cov tswv yim digital ib txwm: hauv ob qho tib si, cov lus qhia tshwj xeeb yog cov khoom siv digital digital.
   Cov tswv yim no kuj tseem siv tau ua pat c: Kuv tus ncej encoder.
   Nyob rau hauv cov ntaub ntawv no, high-speed Input specifications siv.

ceeb toom:

• Tsis siv tus pins yuav tsum tsis txhob txuas. Tsis quav ntsej cov lus qhia no tuaj yeem ua rau tus tswj hwm.
• Kev siv tsis raug ntawm cov khoom no tuaj yeem ua rau tus maub los ua kev puas tsuaj loj.
• Xa mus rau tus maub los tus neeg siv Guldereg..-ding thaiv kev txiav txim siab.
• Ua ntej siv cov khoom no. Nws yog lub luag haujlwm ntawm tus neeg siv los nyeem cov khoom siv phau ntawv qhia thiab tag nrho cov ntaub ntawv nrog.

Nco tseg 8:

Tus nqi analog kuj tuaj yeem qhia tau thaum lub tswv yim ua haujlwm tawm ntawm qhov ntau.
Yog hais tias ib qho analog input deviates saum toj no qhov kev tso cai, nws tus nqi yuav yog 1024.

Nco tseg 9:
Voltage currant kev twb kev txuas shields yuav tsum tau kev cob cog rua ntawm lub teeb liab qhov chaw.
Lub teeb liab 0V ntawm analog input yuav tsum txuas nrog tus maub los rN.

Nco tseg 10:
Cov zis #0 thiab tso zis #1 yuav siv tau raws li cov zis siab.





Nco tseg:

1. Tag nrho 12 inputs tuaj yeem teeb tsa rau pnp (qhov chaw) lossis npn (lub dab dej) los ntawm ib qho jumper thiab xaim tsim nyog.
2. Cov khoom siv # 10 thiab # 11 tuaj yeem ua haujlwm raws li cov khoom siv digital lossis cov khoom siv analog, ntawm kev sib tw dhia thiab cov xaim tsim nyog.
3. Tag nrho 12 lub tswv yim tuaj yeem ua haujlwm hauv 12 voe lossis 24 VOC; teeb tsa ntawm ib leeg j1.mper thiab cov xaim tsim nyog.
4. npn (sink) inputs siv voltage muab los ntawm tus tswj lub hwj chim mov.
5. Cov khoom siv # 0, # 2 thiab # 4 tuaj yeem ua haujlwm raws li cov txee siab ceev lossis ua ib feem ntawm tus ncej encoder. Nyob rau hauv txhua rooj plaub, high-speed input specifications siv. Thaum siv raws li ib txwm digital input. ib txwm input specifications siv.
6. Cov tswv yim # 1 , # 3 thiab # 5 tuaj yeem ua haujlwm raws li lub txee rov pib dua, lossis raws li cov tswv yim digital ib txwm nyob hauv ob qho tib si, cov lus qhia tshwj xeeb yog cov khoom siv digital digital.
   Cov Inputs no kuj tseem siv tau los ua ib feem da ncej encoder.
   Hauv qhov no, high-speed input specifications siv.

Lus ceeb toom:

• Tsis siv tus pins yuav tsum tsis txhob c: onneded. Tsis quav ntsej cov lus qhia no tuaj yeem ua rau tus tswj hwm.
• Kev siv tsis raug ntawm cov khoom no tuaj yeem ua rau lub c: maub los ua kev puas tsuaj loj.
• Xa mus rau tus tswj tus neeg siv phau ntawv qhia txog kev xav txog kev xaim.
• Ua ntej siv cov khoom no. nws yog lub luag haujlwm d tus neeg siv los nyeem cov khoom siv phau ntawv qhia thiab tag nrho cov ntaub ntawv nrog.

Nco tseg 8:

Tus nqi analog kuj tuaj yeem qhia tau thaum lub tswv yim ua haujlwm tawm ntawm ntau yam.
Yog hais tias ib qho analog input deviates saum toj no qhov kev tso cai, nws tus nqi yuav yog 1024.

Nco tseg 9:
Voltage tam sim no kev twb kev txuas shields yuav tsum tau los ntawm cov teeb liab qhov chaw.
Cov

Nco tseg 10:
Cov zis #0 thiab tso zis #1 tuaj yeem siv los ua cov zis tawm nrawm.

Jumpers Chaw

Cov lus hauv qab no qhia yuav ua li cas los teeb tsa ib lub jumper tshwj xeeb los hloov kev ua haujlwm ntawm tus maub los.
Txhawm rau qhib tus maub los thiab nkag mus rau cov jumpers, xa mus rau cov lus qhia thaum kawg ntawm cov lus qhia no.

Tseem ceeb:
Kev teeb tsa jumper tsis sib xws thiab kev sib txuas ntawm cov xov hlau tuaj yeem ua rau tus maub los ua kev puas tsuaj loj heev.

jp1 ua
Hom Digital Inputs

Yuav siv li	jp1 ua
npn (sink)	A
pnp (soures)”	B

jp2 ua
Inputs voltage

Yuav siv li	jp2 ua
12 VDC ua	A
24VDC *	B

JP3, JP 4
Analog inputs hom

Yuav siv li	jp3 ua rau analog tswv yim #1	jp4 ua rau analog tswv yim #0
Voltage input*	A	A
Cov tswv yim tam sim no	B	B

JP, JP 6
Digital / Analog inputs

Ntau yam	JPS rau AN1 / Ib #10	jp6 ua rau ANO / Ib #11
Cov tswv yim digital •	A	A
Analog inputs	B	B

Nyob rau hauv daim duab no, lub jumper nqis yuav ua rau tus maub los ua haujlwm raws li hauv qab no:
Digital inputs: npn, 24VDC inputs
Analog tswv yim #0: Voltage tswv yim
Analog input #1: Cov tswv yim tam sim no

Kev sib txuas lus Ports

Nco ntsoov tias cov qauv tswj sib txawv muaj qhov sib txawv serial thiab CANbus kev sib txuas lus xaiv. Txhawm rau pom cov kev xaiv twg muaj feem cuam tshuam, xyuas koj tus maub los qhov kev qhia tshwj xeeb.

• Tua hluav taws xob ua ntej ua kev sib txuas lus.

Ceev faj

• Nco ntsoov tias cov chaw nres nkoj serial tsis raug cais tawm.
• Cov teeb liab muaj feem xyuam rau tus maub los 0V; tib yam 0V yog siv los ntawm cov khoom siv hluav taws xob.
• Ib txwm siv cov chaw nres nkoj tsim nyog adapters.

Kev sib txuas lus Serial

Cov koob no suav nrog 2 qhov chaw nres nkoj tuaj yeem teeb tsa rau RS232 lossis RS485 raws li jumper nqis. Los ntawm lub neej ntawd, cov chaw nres nkoj tau teeb tsa rau RS232.
Siv RS232 rub tawm cov kev pab cuam los ntawm PC, thiab sib txuas lus nrog cov khoom siv thiab cov ntawv thov, xws li SCADA.
Siv RS485 los tsim kom muaj ntau qhov kev sib txuas uas muaj txog 32 cov khoom siv.

Ceev faj

• Cov chaw nres nkoj serial tsis cais. Yog hais tias tus maub los yog siv nrog ib qho khoom siv uas tsis yog-solated, tsis txhob muaj peev xwm voltage uas tshaj ± 10V.

Pinouts
Cov pinouts hauv qab no qhia cov cim ntawm lub adapter thiab chaw nres nkoj.

TSI RS232
Tus pin #	Kev piav qhia
1*	DTR teeb liab
2	0v siv
3	TXD signal
4	RXD teeb liab
5	0v siv
6*	DSR teeb liab *

TSI RS485		Chaw nres nkoj maub los
Tus pin #	Kev piav qhia
1	Lub teeb liab (+)
2	(RS232 teeb liab)
3	(RS232 teeb liab)
4	(RS232 teeb liab)
5	(RS232 teeb liab)
6	B teeb liab (-)

* Cov txheej txheem programming cables tsis muab cov ntsiab lus txuas rau pins 1 thiab 6.

RS232 rau RS485: Hloov Jumper Settings

• Txhawm rau nkag mus rau cov jumpers, qhib lub maub los thiab tom qab ntawd tshem tawm cov module ntawm PCB pawg thawj coj saib. Ua ntej koj pib, tua lub hwj huam mov, disconnect thiab dismount tus maub los.
• Thaum qhov chaw nres nkoj tau yoog rau RS485, Pin 1 (DTR) yog siv rau lub teeb liab A, thiab Pin 6 (DSR) teeb liab yog siv rau teeb liab B.
• Yog tias qhov chaw nres nkoj tau teeb tsa rau RS485, thiab tsis siv cov cim DTR thiab DSR, qhov chaw nres nkoj kuj tuaj yeem siv los sib txuas lus ntawm RS232; nrog rau cov cables tsim nyog thiab xaim.
• Ua ntej ua cov haujlwm no, kov cov khoom siv hauv av kom tso tawm cov nqi hluav taws xob electrostatic.
• Tsis txhob kov PCB board ncaj qha. Tuav lub PCB board los ntawm nws cov connectors.

Qhib tus maub los

1. Tua lub hwj chim ua ntej qhib lub maub los.
2. Nrhiav cov 4 qhov ntawm ob sab ntawm tus maub los.
3. Siv cov hniav ntawm ib lub tiaj-bladeed screwdriver, maj mam rub tawm sab nraum qab ntawm tus maub los.
   
4. Maj mam tshem tawm sab saum toj PCB board:
   ib. Siv ib txhais tes los tuav lub sab saum toj-feem ntau PCB board los ntawm nws sab saum toj thiab hauv qab connectors.
   b. Nrog rau qhov tod tes, tuav tus maub los, thaum tuav ntawm cov chaw nres nkoj serial; qhov no yuav ua rau lub rooj tsavxwm hauv qab tsis raug tshem tawm ua ke nrog lub rooj tsavxwm sab saum toj.
   c. Tsis tu ncua rub lub sab saum toj board tawm.
   
5. Nrhiav cov jumpers, thiab tom qab ntawd hloov cov jumper nqis raws li xav tau.
6. Maj mam hloov lub PCB board. Xyuas kom tseeb tias cov pins haum kom raug rau hauv lawv qhov chaw txais khoom.
   ib. Tsis txhob yuam lub rooj tsavxwm rau hauv qhov chaw; ua li ntawd yuav ua rau tus tswj hwm puas.
   
7. Kaw tus maub los los ntawm snapping lub hau yas rov qab rau hauv nws qhov chaw. Yog tias daim npav muab tso rau kom raug, lub hau yuav snap rau yooj yim.

M91: RS232 / RS485 Jumper Settings

RS232 / RS485 Jumper Chaw
Yuav siv li	Sib 1	Sib 2
RS 232 *	A	A
TSI RS485	B	B

RS485 Termination
Kev txiav txim	Sib 3	Sib 4
RAU*	A	A
OFF	B	B

* Default Hoobkas teeb.

V120: RS232 / RS485 Jumper nqis

	Jumper Settings
	Jumper	RS 232 *	TSI RS485
COJ 1	1	A	B
	2	A	B
COJ 2	5	A	B
	6	A	B

TSI RS485 Kev txiav txim
Jumper	RAU*	OFF
3	A	B
4	A	B
7	A	B
8	A	B

* Default Hoobkas teeb.

CANbus

Cov tswj hwm no suav nrog CANbus chaw nres nkoj. Siv qhov no los tsim kom muaj kev tswj hwm kev tswj hwm kev tswj hwm txog li 63 tus tswj hwm, siv Unitronics 'proprietary CANbus raws tu qauv lossis CANopen.
Qhov chaw nres nkoj CANbus yog galvanically cais

CANbus Kev Siv Hluav Taws Xob

Siv twisted-pair cable. DeviceNet® tuab shielded twisted khub cable raug pom zoo.
Network terminators: Cov no yog muab nrog tus maub los. Tso cov terminators ntawm txhua qhov kawg ntawm CANbus network.
Kuj yuav tsum tau teem rau 1%, 1210, 1/4W.
Txuas av teeb liab rau lub ntiaj teb ntawm tsuas yog ib qho chaw, nyob ze ntawm lub hwj chim mov.
Lub network fais fab mov yuav tsum tsis txhob yog qhov kawg ntawm lub network

CANbus Connector

Cov ntaub ntawv hauv daim ntawv no qhia txog cov khoom ntawm hnub luam ntawv. Unitronics muaj txoj cai, raws li tag nrho cov kev cai lij choj siv, txhua lub sijhawm, ntawm nws qhov kev txiav txim siab ib leeg, thiab tsis muaj ntawv ceeb toom, txiav tawm lossis hloov cov yam ntxwv, tsim, cov khoom siv thiab lwm yam tshwj xeeb ntawm nws cov khoom, thiab tshem tawm mus tas li lossis ib ntus. lub forgoing los ntawm kev ua lag luam.

Tag nrho cov ntaub ntawv hauv daim ntawv no yog muab "raws li yog" yam tsis muaj kev lav phib xaub ntawm txhua yam, qhia lossis hais, suav nrog tab sis tsis txwv rau ib qho kev lees paub ntawm kev ua lag luam, kev nyab xeeb rau ib lub hom phiaj, lossis tsis ua txhaum cai. Unitronics xav tias tsis muaj lub luag haujlwm rau qhov ua yuam kev lossis kev ua tsis tiav hauv cov ntaub ntawv qhia hauv daim ntawv no. Tsis muaj ib qho xwm txheej twg Unitronics yuav tsum lav rau ib qho tshwj xeeb, xwm txheej, tsis ncaj los yog qhov kev puas tsuaj ntawm txhua yam, lossis kev puas tsuaj txhua yam tshwm sim los ntawm kev siv lossis kev ua haujlwm ntawm cov ntaub ntawv no.

Cov npe lag luam, cov cim lag luam, logos thiab cov cim kev pabcuam tau nthuav tawm hauv daim ntawv no, suav nrog lawv cov qauv tsim, yog cov cuab yeej ntawm Unitronics (1989) (R"G) Ltd. lossis lwm tus neeg thib peb thiab koj tsis raug tso cai siv lawv yam tsis muaj ntawv tso cai ua ntej. ntawm Unitronics lossis lwm tus neeg sab nrauv raws li lawv muaj

Cov ntaub ntawv / Cov ntaub ntawv

UNITRONICS V120-22-T2C HMI Display Unit [ua pdf] Cov neeg siv phau ntawv qhia V120-22-T2C, M91-2-T2C, V120-22-T2C HMI Display Unit, V120-22-T2C, HMI zaub chav, Chav tsev, Chav tsev

Cov ntaub ntawv

• Cov neeg siv phau ntawv