Theben 1610011 Analog Timer nrog Synchronous Tsav

Cov ntaub ntawv khoom

Specifications

• Qauv: SYN 161 d
• Qauv Zauv: 1610011

Cov lus qhia siv khoom

Kev Tiv Thaiv Kev Nyab Xeeb

Ua ntej siv cov khoom, thov nyeem thiab nkag siab txog kev ceev faj txog kev nyab xeeb hauv qab no:

• Xyuas kom lub hwj huam mov yog disconnected ua ntej installation los yog txij nkawm.
• Tsis txhob kov tej qhov chaw nyob kom tsis txhob muaj hluav taws xob poob.
• Tsis txhob siv cov khoom ntub dej los yog damp tej yam kev mob.
• Khaws cov khoom kom deb ntawm cov khoom siv hluav taws xob tiv thaiv hluav taws.

Kev teeb tsa

Txhawm rau txhim kho cov khoom, ua raws li cov kauj ruam no:

1. Nrog rau tus kws tshaj lij hluav taws xob tsim nyog rau kev teeb tsa kom ntseeg tau tias muaj kev sib txuas hluav taws xob zoo.
2. Disconnect lub hwj chim mov ua ntej pib nrog lub installation.
3. Mount cov khoom ruaj ntseg ntawm qhov chaw tsim nyog.
4. Txuas cov xaim hluav taws xob tsim nyog raws li daim duab kos duab muab.
5. Xyuas kom txhua qhov kev sib txuas yog nruj thiab ruaj ntseg.
6. Thaum ntsia, muab ob npaug rau-xyuas tag nrho cov kev sib txuas ua ntej rov qab siv zog.

Kev ua haujlwm

Txhawm rau ua haujlwm ntawm cov khoom, ua raws li cov lus qhia no:

1. Xyuas kom lub hwj huam mov txuas nrog thiab qhib.
2. Xa mus rau cov neeg siv phau ntawv rau cov haujlwm tshwj xeeb thiab kev teeb tsa.
3. Siv cov kev tswj hwm tau muab los yog interface los kho qhov xav tau.
4. Ua raws li cov lus qhia txog kev nyab xeeb lossis kev txwv uas tau hais hauv phau ntawv siv.
5. Yog tias muaj teeb meem lossis kev ua haujlwm tsis zoo tshwm sim thaum lub sijhawm ua haujlwm, tshem tawm cov khoom siv hluav taws xob thiab sab laj nrog tus kws tshaj lij.

Kev tu

Txhawm rau tswj cov khoom thiab xyuas kom nws lub neej ntev, ua raws li cov lus qhia no:

• Tsis tu ncua ntxuav cov khoom siv ib daim ntaub mos, qhuav. Tsis txhob siv cov khoom siv abrasive lossis cov kuab tshuaj.
• Tshawb xyuas cov khoom kom pom tias muaj kev puas tsuaj lossis hnav. Hloov cov khoom puas tam sim ntawd.
• Khaws cov khoom kom tsis txhob muaj plua plav thiab khib nyiab los ntawm kev ntxuav nws tsis tu ncua.
• Tsis txhob sim kho lossis hloov cov khoom koj tus kheej. Hu rau lub chaw muab kev tso cai rau kev pab.

FAQ

Q: Kuv puas tuaj yeem nruab cov khoom ntawm kuv tus kheej yam tsis tau sab laj nrog tus kws tshaj lij?

A: Nws raug nquahu kom sab laj nrog tus kws tshaj lij hluav taws xob tsim nyog rau kev teeb tsa kom ntseeg tau tias muaj kev sib txuas hluav taws xob thiab kev nyab xeeb.

Q: Kuv yuav ua li cas yog tias muaj hwj chim outage?

A: Thaum lub zog outage, cov khoom yuav tsis ua haujlwm. Thaum lub zog rov qab los, cov khoom yuav rov ua haujlwm li qub.

Q: Kuv yuav tsum ntxuav cov khoom ntau npaum li cas?

A: Nws raug nquahu kom ntxuav cov khoom tsis tu ncua siv cov ntaub mos, qhuav kom tshem tawm cov plua plav thiab cov khib nyiab. Qhov zaus ntawm kev ntxuav yog nyob ntawm ib puag ncig uas siv cov khoom siv.

CEEB TOOM
Kev phom sij ntawm kev tuag los ntawm hluav taws xob los yog hluav taws kub!

• Kev teeb tsa yuav tsum tsuas yog ua los ntawm tus kws tshaj lij hluav taws xob!
• Disconnect lub mains fais fab mov ua ntej installation thiab / los yog disassembly!

Cov ntaub ntawv dav dav

• Analogue lub sij hawm hloov
• Qhov kev pab cuam txhua hnub
• 1 channel
• Shortest hloov lub sij hawm 15 min

Cov ntaub ntawv technical

• Kev khiav hauj lwm voltage230V ~, + 10% / -15%
• Ntau zausIb: 50hz
• Kev siv fais fab1 VA:
• Nyob impulse voltage: 4kv ua
• Hu rau: wo way switch
• Qhib davLoj: <3mm (μ)
• Switching muaj peev xwm: 16 A, 250 V~, cos ϕ = 1
  • 4 A, 250 V~, cos ϕ = 0,6
• Min. Hloov peev xwm: 24 V / 100 mA AC
• Cov roj lamp load: 1100 W
• Ua haujlwm kubKub: -20 ° C ... + 55 ° C
• Kev tiv thaiv chav kawm: II raws li EN 60669-1 raug rau kev teeb tsa
• Kev tiv thaiv ntsuas: IP20 raws li EN 60529
• Lub sijhawm raug: synchronized nrog mains
• Pollution degree: 2
• Hom: 1 TUG

Tsim siv

• Lub sijhawm hloov pauv tuaj yeem siv rau teeb pom kev zoo, qhov cua, qhov chaw, kev tshaj tawm hoardings thiab lwm yam.
• Tsuas yog siv rau hauv cov chav kaw, qhuav
• Kev teeb tsa ntawm DIN lub kaus mom sab saum toj (raws li DIN EN 60715)
•  Kev hloov ntawm ib qho xov hlau sab nraud raug tso cai, hloov ntawm SELV tsis raug tso cai.

Kev teeb tsa

• Nruab ntawm DIN sab saum toj plaub hau ntsia (raws li EN 60715)
• Disconnect lub hwj chim qhov chaw
• Sawb cable los ntawm 8 mm (max. 9 mm)
• Ntxig cable ntawm 45 ° hauv lub davhlau ya nyob twg qhib L 2 cables rau ib lub davhlau ya nyob twg yog ua tau
• Tsuas yog nrog cov xaim siv tau yooj yim: Nias lub hau ntsaws rau hauv qab kom qhib lub caij nplooj ntoos hlav davhlau ya nyob twg

Disconnecting lub cable

• Siv lub hau ntswj txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm rau txhawm

Kev sib txuas

• Nco ntsoov daim duab txuas

Kev piav qhia

1. Hloov qhov kev xaiv ua ntej / hloov qhov ntsuas qhov ntsuas
   1. – 0 = tawm
   2. – 1 = ib
2. Timing disc rau lub sijhawm tso saib (hloov sijhawm)
3. Hloov ntu rau programming SYN 161 d (1 = 15 min)
4. Sawv ntxov / tav su (AM / PM) lub sij hawm tso saib (tam sim no)
5. Tes rau kev teeb tsa lub sijhawm (teev teev thiab feeb) tuaj yeem hloov kho clockwise; tig feeb handirmly mus rau sab xis
6. Peb txoj kev hloov: Permanent ON – AUTO – Permanent OFF

Tsis txhob tig ntawm lub disc hloov! Teem lub sijhawm tsuas yog nrog lub moos tes

1. Teem sijhawm
   1.  Teem lub sijhawm tam sim no
   2. eg 3:00 (tag kis)
   3. eg 15:00 (tav su)
2. Teem sijhawm hloov pauv
   1. e.g. 6:15–10:45; 16:15–21:00 ON
3. Teeb tsa kev ua haujlwm ntawm tes / hloov kev xaiv ua ntej
   1. ua ntej 3:00 ON (= 1)
      → Lub sij hawm hloov ua lub teeb hloov
      lub sij hawm, piv txwv li nws rov qab mus rau qhov kev pab cuam.
4. Teeb 1 – – 0 hloov mus tas li
   1. 1. → Program tsis ua haujlwm.
      2. 1 = Permanent ON
      3. 0 = Permanent OFF

 

Cov ntaub ntawv / Cov ntaub ntawv

Theben 1610011 Analog Timer nrog Synchronous Tsav [ua pdf] Phau ntawv qhia 1610011 Analog Timer nrog Synchronous Tsav, 1610011, Analog Timer nrog Synchronous Tsav, Synchronous Tsav, Tsav

Cov ntaub ntawv

• Cov neeg siv phau ntawv