Cov ntsiab lus zais
1 ProdataKey Liab 1 High-Security Controller
2 Cov ntaub ntawv khoom
3 Cov lus qhia siv khoom
4 FAQ
5 Ntim Cov Ntsiab Lus
6 Mounting Controller
7 Kev sib txuas nyeem ntawv
8 Kev sib txuas A / DPS
9 Xauv Relay
10 Kev sib txuas lus
11 Kev sib txuas fais fab
12 OSDP Reference Guide
13 Cov ntaub ntawv / Cov ntaub ntawv
13.1 Cov ntaub ntawv

ProdataKey-logo

ProdataKey Liab 1 High-Security Controller

ProdataKey-Red-1-High-Security-Controller-khoom Cov ntaub ntawv khoom

Specifications:

  • Hom Lub Npe: ProdataKey, Inc.
  • Khoom Series: RED SERIES HARDWARE
  • Qauv: Liab 1 High-Security Controller

Cov lus qhia siv khoom

Kev teeb tsa:

  1. Nrhiav qhov chaw tsim nyog rau Red 1 High-Security Controller.
  2. Ruaj ntseg mount tus maub los siv cov ntsia hlau thiab cov cuab yeej tsim nyog.
  3. Txuas cov cables tsim nyog raws li tus neeg siv phau ntawv.

Kev teeb tsa:

  1. Fais fab ntawm Red 1 High-Security Controller.
  2. Ua raws li kev teeb tsa wizard ntawm lub cuab yeej txuas nrog txhawm rau teeb tsa tus maub los.
  3. Teeb tsa cov neeg siv nkag mus rau qib thiab tso cai raws li xav tau.

Kev ua haujlwm:

  1. Siv cov ntaub ntawv pov thawj lossis kev nkag mus rau kev cuam tshuam nrog tus maub los.
  2. Saib xyuas kev nkag mus rau cov cav thiab cov xwm txheej tsis tu ncua rau kev ruaj ntseg.
  3. Teeb meem txhua yam teeb meem raws li cov lus qhia daws teeb meem hauv cov neeg siv phau ntawv.

FAQ

  • Q: Kuv yuav rov pib dua Red 1 High-Security Controller li cas?
    • A: Txhawm rau rov pib dua tus maub los, nrhiav lub pob pib dua ntawm lub cuab yeej thiab tuav nws rau 10 vib nas this kom txog thaum lub cuab yeej rov pib dua.
  • Q: Kuv puas tuaj yeem nthuav dav lub peev xwm ntawm Red 1 High-Security Controller?
    • A: Yog lawm, koj tuaj yeem nthuav dav lub peev xwm los ntawm kev ntxiv cov qauv nthuav dav raws li tus neeg siv phau ntawv qhia.

Phau Ntawv Qhia Pib Ceev

Ntim Cov Ntsiab LusProdataKey-Red-1-High-Security-Controller-fig (1)

Mounting ControllerProdataKey-Red-1-High-Security-Controller-fig (2)

Kev sib txuas nyeem ntawvProdataKey-Red-1-High-Security-Controller-fig (3)

  • Tus nyeem ntawv · Tus nyeem ntawv tau teeb tsa ntawm lub qhov rooj nrog 22/5 lossis 22/6 xaim khiav mus rau lub qhov rooj tswj hwm. Txuas tus nyeem ntawv mus rau tus tswj raws li qhia saum toj no. Nco ntsoov xyuas polarity thiab voltage ua ntej powering controller.
  • B OSDP · Muab jumper los pab OSDP (saib OSDP siv phau ntawv qhia kawg ntawm phau ntawv qhia no kom paub ntxiv)

Kev sib txuas A / DPSProdataKey-Red-1-High-Security-Controller-fig (4)

  • A DPS (Qhov Rooj Qhov Chaw Hloov) - OPS tau teeb tsa ntawm lub qhov rooj ncej hauv qhov chaw xav tau nrog 22/2 xaim khiav los ntawm OPS mus rau tus maub los. Xaim DPS rau tus maub los raws li qhia saum toj no. Thaum siv ob lub OPS sensors rau ob lub qhov rooj koj yuav xaim lawv nyob rau hauv koob nrog tsuas yog ob tus neeg xyuas pib khiav rov qab mus rau tus maub los rau kev sib txuas.
  • B AUX Input -Ib txoj cai tuaj yeem teeb tsa los ua cov xwm txheej lossis cov khoom tawm raws li qhov kev tawm tswv yim no.

Input B / REX Kev TxuasProdataKey-Red-1-High-Security-Controller-fig (5)

  • A Mai: xauv - Thaum txhim kho Maglock nws yog ib qho tsim nyog rau nruab REX (ReQuest to Exit) ntawm lub qhov rooj kom dawb egress. Khiav ib qho 18/2 xaim los ntawm Magtock mus rau Lub Rooj Tswjhwm Saib, txuas mus rau Maglock raws li qhia.
  • B REX (Thov Tawm) - REX tau teeb tsa hauv qhov chaw xav tau nrog 18/5 xaim khiav los ntawm REX mus rau tus maub los. Xaim REX rau tus maub los thiab maglock raws li qhia saum toj no. Yog tias tsis xav tau kev tshaj tawm hauv qhov system, tsuas yog tshem tawm cov ntawv cim ntsuab.
  • C Jumper Block – Siv los xaiv (+) lossis (-) board voltage tawm ntawm NO thiab NC. Yog tias jumper tawm, tus relay yog tus qauv qhuav hu xav tau kev nkag mus rau hauv
  • AUX Input - Ib txoj cai tuaj yeem teeb tsa los ua cov xwm txheej lossis cov khoom tawm raws li qhov kev tawm tswv yim no.

Xauv Relay
ProdataKey-Red-1-High-Security-Controller-fig (6)

  • Ib Diode - Lub diode muab yuav tsum tau ntsia thaum siv kev tawm tsam. Nruab ntawm qhov kev tawm tsam nrog grey kab txaij ntawm diode ntawm qhov zoo thiab dub ntawm qhov tsis zoo.
  • B NC - Siv rau mag!ocks (los yog ntaus hauv kev teeb tsa tsis zoo). Txuas qhov tsis zoo (-) ntawm maglock lossis ntaus rau NC ntawm lub qhov rooj tswj.
  • C TSIS TAU - Siv rau kev tawm tsam hauv kev teeb tsa tsis ruaj ntseg. Txuas qhov tsis zoo (-) ntawm qhov kev tawm tsam rau NO ntawm tus tswj lub qhov rooj.
  • D Jumper Block – Siv los xaiv (+) lossis (-) board voltage tawm ntawm NO thiab NC. Yog tias jumper tawm, tus relay yog tus qauv qhuav hu xav tau kev nkag mus rau hauv

Kev sib txuas lusProdataKey-Red-1-High-Security-Controller-fig (7)

  • A Ethernet - Txhua Red controllers tuaj nrog tsim hauv RJ45 kev sib txuas rau kev sib txuas hauv network. Thaum txuas nrog Red 1 maub los yog
  • Tus kheej-Discoverable los ntawm pdk.io siv IPV6. Xwb koj tuaj yeem siv IPV4 lossis muab tus IP zoo li qub siv pdk.io yog xav tau.
  • Cov khoom siv wireless (PN: RMW) thiab PoE (PN: RM POE) tuaj yeem yuav khoom siv rau kev xaiv kev sib txuas lus ntxiv.ProdataKey-Red-1-High-Security-Controller-fig (8)

Kev sib txuas fais fabProdataKey-Red-1-High-Security-Controller-fig (9)

  • DC INPUT - Siv 14VOC, 2 amp transformer rau DC fais fab input. Nws raug nquahu kom siv 18/2 xaim. Rau siab voltage daim ntawv thov, siv HV converter (PN: HVQ
  • BATTERY -Lub thawv ntim yuav haum rau feem ntau 12 VOC 8 Ah roj teeb. Lub roj teeb txuas nrog cov khoom siv lead ua thiab yog polarity rhiab heev. Tau txais mus txog 8 teev ntawm lub roj teeb thaub qab siv qhov kev tawm tsam hauv kev tsis ruaj ntseg.

Phau ntawv qhia

  • Hluav taws xob nkag -To integrate cov hluav taws kub system siv lub Red 1 qhov rooj maub los, xa mus rau cov kab kos nyob rau hauv tus khub Portal ntawm www.prodatakey.com/resources
  • Proi: kev: - Tom qab Red 1 qhov rooj tswj tau txuas rov qab mus rau Huab Node, nkag mus rau cov software teeb tsa raws li tau qhia hauv phau ntawv programming. Phau ntawv no muaj rau rub tawm los ntawm Partner Portal ntawm www.prodatakey.com/pdkio Reader Compatibility - ProdataKey tsis xav tau cov neeg nyeem ntawv. Cov tswj qhov rooj lees txais cov tswv yim wiegand, suav nrog cov nyeem biometric thiab cov keyboards. OSOP cov neeg nyeem tau txais kev txhawb nqa los ntawm kev siv cov jumper nrog (saib OSOP cov lus qhia). Hu rau kev txhawb nqa kom paub meej. UL 294 Kev Ua Raws Cai - Txhua yam khoom siv yuav tsum ua raws li UL daim ntawv pov thawj tsim nyog. Rau UL teev kev teeb tsa, tag nrho cov cable khiav yuav tsum tsawg dua 30 meters (98.5′)
  • Tshooj Naj Npawb - Rl

PDK Kev Pabcuam Kev Pabcuam

OSDP Reference Guide

  • Dab tsi yog OSOP -Open Supervised Device Protocol (OSDP) Yog ib qho kev tswj xyuas kev nkag mus rau com mu nlcatlons tus qauv tsim los ntawm Lub Koom Haum Kev Lag Luam Kev Ruaj Ntseg los txhim kho lnteroperablllty ntawm kev tswj xyuas thiab kev ruaj ntseg khoom. OSDP coj kev ruaj ntseg thiab txhim kho kev ua haujlwm. Nws muaj kev ruaj ntseg dua Wiegand thiab txhawb AES-128 encryption.
  • OSDP Wire Specification - Plaub (4) tus neeg xyuas pib twisted tag nrho cov ntaub thaiv npog Yog pom zoo kom nyob twj ywm fullyTIA-48S raws li qhov siab tshaj plaws txhawb baud tus nqi thiab cable nrug.
  • Nco tseg -Nws muaj peev xwm rov siv dua Wiegand txuas uas twb muaj lawm rau OSDP, txawm li cas los xij, siv slm pie stranded cable ib yam ntawm Wiegand nyeem feem ntau tsis tau raws li RS485 twisted khub cov lus pom zoo.
  • OSDP Multi-Drop - Ntau qhov poob muab rau koj muaj peev xwm ua kom haum rau ntau tus neeg nyeem los ntawm kev khiav ib qhov ntev ntawm 4-tus neeg xyuas pib, tshem tawm qhov xav tau los khiav hlau rau txhua lub xaim.
  • Nco tseg -Four (4) Puas yog cov neeg nyeem ntau tshaj plaws ntawm txhua qhov chaw nres nkoj tuaj yeem txhawb nqa
  • Nco tseg -Wiegand cov neeg nyeem yuav tsis ua haujlwm thaum OSDP Jumpers raug teeb tsa

Cov ntaub ntawv / Cov ntaub ntawv

ProdataKey Liab 1 Tus Tswj Kev Ruaj Ntseg Siab [ua pdf] Cov neeg siv phau ntawv qhia
Liab 1 Kev Ruaj Ntseg Siab, Liab 1, Kev Ruaj Ntseg Siab, Kev Tswj Xyuas Kev Ruaj Ntseg, Kev Tswj

Cov ntaub ntawv

Cia ib saib

Koj email chaw nyob yuav tsis raug luam tawm. Cov teb uas yuav tsum tau muaj yog cim *