Pit Boss P7-340 Controller Temp Control Program teeb tsa

Specifications:

• Qauv: P7-340
• Controller: Temp-Control Program Setting
• Vaj Huam Sib Luag Keys: PSET Button, Fais Fab Khawm, Rotary Knob

Cov lus qhia siv khoom

Kev teeb tsa cov kauj ruam:

1. Nias thiab tuav lub khawm PSET thaum nws tsis muaj zog (UNPLUG).
2. Ua kom lub cev muaj zog (PLUG THE UNIT).
3. Tso lub PSET khawm.
4. Nias lub hwj huam khawm kom nkag mus rau qhov Program Code Teem Hom.
5. Xaiv ib qho program code rau koj cov hniav nyiaj hniav kub.

Kev daws teeb meem:

Tsis muaj hluav taws xob teeb ntawm Lub Rooj Tswjhwm Saib

• Ua rau: Lub hwj chim khawm tsis txuas nrog lub hwj chim qhov chaw, GFCI qhov hluav taws xob tau tripped, fuse tshuab rau ntawm lub rooj tsavxwm tswj, faulty control board.
• Kev daws: Nias lub hwj huam khawm. Txheeb xyuas qhov chaw txuas hluav taws xob. Pib dua breaker. Xyuas fuse rau kev puas tsuaj. Hloov fuse yog tias tsim nyog. Hloov cov tswj vaj huam sib luag yog faulty.

Hluav taws kub hauv lauj kaub yuav tsis teeb

• Ua rau: Auger tsis primed, auger lub cev muaj zog yog jammed, igniter tsis ua hauj lwm.
• Kev daws: Kos thiab prime lub auger, tshem tawm cov jams, tshuaj xyuas thiab hloov igniter yog tias xav tau.

P7-340 CONTROLLER TEMP-CONTROL

PROGRAM SETTING STEPS MANUAL
P7-340 Controller yog lub rooj tsav xwm hloov pauv rau Pit Boss Ntoo Pellet Grill Tailgater (P7-340) / Lexington (P7-540) / Classic (P7-700) / Austin XL (P7-1000). Cov maub los no muaj 1 qhov kev pabcuam thoob ntiaj teb rau txhua tus thiab 4 OEM kev tswj qhov kub thiab txias (L02, L03, P01, S01) rau ntau tus qauv ntawm PIT Boss grills muag hauv khw. Yog tias koj xav siv OEM kev tswj hwm qhov kub thiab txias, koj yuav tsum tau kuaj xyuas koj qhov program code pom ntawm koj tus qub maub los hauv thawj thib ob tom qab koj qhib nws, tom qab ntawd teeb tsa P7-PRO maub los nrog tus lej koj tau txais. Yog tias koj tus maub los qub lawm, koj tuaj yeem teeb tsa tus lej raws li hauv qab no:

L03: AUSTIN XL, L02: CLASSIC, P01: LEXINGTON, S01: TAILGATER thiab 440FB1 MATTE BLACK.

Vaj Huam Sib Luag Keys Illustration

1. "P" SET khawm
2. Lub hwj chim khawm
3. Qeeb Mentshis pob qhov rooj

Kev teeb tsa cov kauj ruam

1. Nias thiab tuav lub "P" SET khawm thaum nws tsis muaj zog (UNPLUG);
2. Ua kom lub zog (PLUG THE UNIT);
3. Tso lub "P" SET khawm;
4. Nias lub hwj huam khawm kom nkag mus rau qhov Program Code teeb hom;
5. Xaiv ib qho program code rau koj cov hniav nyiaj hniav kub:
   • Tig lub Knob mus rau SMOKE: Zaub qhia tau hais tias lub neej ntawd program P-700, qhov no rau txhua tus qauv;
   • Tig lub pob qhov rooj mus rau 200 °, tso saib "C-L03"; Qhov no ua haujlwm ntawm AUSTIN XL.
   • Tig lub pob qhov rooj mus rau 225 °, tso saib "C-L02"; Qhov no ua haujlwm ntawm CLASSIC.
   • Tig lub pob qhov rooj mus rau 250 °, tso saib "C-P01"; qhov no ua haujlwm ntawm LEXINGTON.
   • Tig lub pob qhov rooj mus rau 300 °, tso saib "C-S01"; qhov no ua haujlwm ntawm TAILGATER & 440FB1 MATTE BLACK
   • Tig lub pob qhov rooj mus rau 350 °, zaub qhia C-700;
   • Tig lub pob qhov rooj mus rau lwm cov degrees, tso saib "—", qhia tias nws tsis tuaj yeem xaiv;
6. Tom qab xaiv txoj cai program code rau koj cov hniav nyiaj hniav kub, nias "P" SET khawm kom paub meej, cov ntawv sib txuas yuav raug pom raws li "P-L03, P- L02, P- P01, P-S01 lossis P-700", qhia tias qhov chaw ua tiav.
7. Tshem tawm lub hwj chim los tawm ntawm Txoj Haujlwm Teeb Hom;
8. Energize chav tsev, cov hniav nyiaj hniav kub tuaj yeem siv tau ib txwm;

KEV TIV THAIV

Hluav taws kub hauv lauj kaub yuav tsis teeb	Auger Tsis Primed	Ua ntej chav tsev siv thawj zaug los yog txhua lub sij hawm lub hopper yog tag nrho tawm, lub auger yuav tsum tau primed kom pellets los sau lub lauj kaub. Yog tias tsis yog primed, lub igniter yuav timeout ua ntej cov pellets ignite. Ua raws Hopper Txheej txheem Priming.
	Auger Tsav yog Jammed	Tshem tawm cov khoom ua noj los ntawm lub txee tseem ceeb ntawm cov pa luam yeeb. Nias lub hwj chim
		Khawm tig lub tsev rau, tig Kub Tswj Dial rau SMOKE, thiab
		tshuaj xyuas lub auger feed system. Visually paub meej tias lub auger poob lawm
		pellets rau hauv lub lauj kaub kub. Yog tias tsis ua haujlwm zoo, hu rau Cov Neeg Siv Khoom Siv rau
		kev pab lossis ib feem hloov.
	Igniter Failure	Tshem tawm cov khoom ua noj los ntawm lub txee tseem ceeb ntawm cov pa luam yeeb. Nias lub hwj chim
		Khawm tig lub tsev rau, tig Kub Tswj Dial rau SMOKE, thiab
		tshuaj xyuas lub igniter. Pom pom tseeb tias lub igniter ua haujlwm los ntawm kev tso koj
		txhais tes saum lub lauj kaub kub thiab xav kom sov. Visually paub meej tias lub igniter
		yog protruding kwv yees li 13 hli / 0.5 nti nyob rau hauv lub lauj kaub kub.
Flashing Dots ntawm LED	Lub Igniter yog nyob rau	Qhov no tsis yog qhov yuam kev uas cuam tshuam rau chav tsev. Siv los qhia tias chav tsev muaj zog
Screen		thiab nyob rau hauv Start-Up hom (igniter yog nyob rau). Lub igniter yuav tua tom qab tsib
		feeb. Thaum lub flashing dots ploj lawm, chav tsev yuav pib kho rau qhov
		xav tau kub xaiv.
Flashing Temperature On	Haus luam yeeb kub yog	Qhov no tsis yog qhov yuam kev uas cuam tshuam rau chav tsev; txawm li cas los xij, nws yog siv los qhia tias muaj
LED Screen	Hauv qab 65 ° C / 150 ° F	yog qee qhov kev pheej hmoo tias hluav taws tuaj yeem tawm mus
"ErH" yuam kev Code	Tus neeg haus luam yeeb muaj	Nias thiab tuav lub hwj huam khawm kom tig lub tsev. Thaum txias, nias lub
	Overheated, tejzaum nws yuav	Fais fab khawm kom tig lub tsev rau, ces xaiv qhov kub uas xav tau. Yog yuam kev
	Rau Roj Roj Hluav Taws Kub lossis Tshaj	code tseem tso tawm, hu rau Cov Neeg Siv Khoom
	Roj.
"Err" yuam kev Code	Temperature Probe Hlau	Nkag mus rau cov khoom siv hluav taws xob ntawm lub hauv paus ntawm chav tsev thiab kos rau ib qho twg
	Tsis Ua Kev Sib Txuas	kev puas tsuaj rau Temperature Probe wires. Xyuas kom ntsuas kub ntsuas qhov ntsuas kub
		connectors ruaj khov, thiab txuas kom raug, mus rau Control
		Board.
"ErL" yuam kev Code	Ignition tsis ua hauj lwm	Cov pellets nyob rau hauv hopper tsis txaus, los yog igniting pas nrig yog txawv txav.
"noP" yuam kev Code	Kev Sib Txuas Tsis Zoo Ntawm	Disconnect nqaij sojntsuam los ntawm kev sib txuas chaw nres nkoj nyob rau hauv Control Board, thiab
	Chaw nres nkoj txuas	rov txuas dua. Xyuas kom cov nqaij sojntsuam adapter txuas ruaj khov. Tshawb xyuas cov paib
		ntawm kev puas tsuaj rau lub adapter kawg. Yog tseem ua tsis tau tiav, hu rau Cov Neeg Siv Khoom Pabcuam rau
		hloov ib feem.
	Meat Probe puas	Tshawb xyuas cov cim qhia ntawm kev puas tsuaj rau cov xov hlau ntawm cov nqaij sojntsuam. Yog puas, hu
		Kev Pabcuam Cov Neeg Siv Khoom rau kev hloov ib feem.
	Faulty Control Board	Control Board yuav tsum tau hloov. Hu rau Cov Neeg Siv Khoom rau a
		hloov ib feem.
Thermometer Qhia	Cov neeg haus luam yeeb muaj qhov chaw siab	Qhov no yuav tsis ua mob rau tus neeg haus luam yeeb. Internal kub ntawm lub ntsiab txee
Kub Thaum Unit	Kub los yog nyob rau hauv ncaj qha	tau ambiently mus txog los yog tshaj 54 ° C / 130 ° F. Txav tus neeg haus luam yeeb rau hauv a
Tawm	Hnub	thaj chaw ntxoov ntxoo. Prop lub txee qhov rooj qhib kom txo qhov kub ntawm sab hauv.
Kev haus luam yeeb yuav tsis ua tiav	Huab cua tsis txaus	Tshawb xyuas lub lauj kaub rau cov hmoov tshauv los yog kev thaiv. Xyuas kiv cua. Xyuas kom nws ua haujlwm
Los yog tuav ruaj khov	Los ntawm Hlawv lauj kaub	kom raug thiab cua nkag tsis tau thaiv. Ua raws li Kev Saib Xyuas thiab Kho
Kub		cov lus qhia yog qias neeg. Tshawb xyuas lub cev muaj zog kom paub meej tias kev ua haujlwm, thiab xyuas kom muaj
		yog tsis muaj blockage nyob rau hauv lub auger raj. Thaum tag nrho cov kauj ruam saum toj no tau ua tiav,
		pib tus neeg haus luam yeeb, teeb kub rau SMOKE thiab tos 10 feeb. Tshawb xyuas
		tias cov nplaim hluav taws ua tau ci ntsa iab.
	Tsis Muaj Roj, Tsis Muaj Roj	Kos lub hopper los xyuas tias cov roj theem txaus, thiab ntxiv yog tias qis. Yuav tsum
	Quality, Obstruction In	qhov zoo ntawm cov ntoo pellets tsis zoo, lossis qhov ntev ntawm cov pellets ntev dhau lawm, qhov no
	Pub Cov Txheej Txheem	tuaj yeem ua rau muaj kev cuam tshuam hauv kev pub noj. Tshem cov pellets thiab ua raws li Care
		thiab cov lus qhia txog kev tu.
	Kev ntsuas kub	Txheeb xyuas qhov ntsuas kub ntsuas. Ua raws li cov lus qhia saib xyuas thiab tu
		yog qias neeg. Hu rau Chaw Pabcuam Cov Neeg Siv Khoom rau qhov hloov pauv yog tias puas.
Kev haus luam yeeb tsim tawm ntau dhau	Roj Build-Up	Ua raws li cov lus qhia saib xyuas thiab tu.
Los yog Tsis Muaj Dej Haus	Ntoo Pellet Zoo	Tshem tawm cov ntoo pellets los ntawm hopper. Ua raws li Kev Saib Xyuas thiab Kho
		cov lus qhia kom ntxuav tawm. Hloov nrog qhuav ntoo pellets
	Hlawv lauj kaub yog thaiv	Clear hlawv lauj kaub ntawm moist ntoo pellets. Ua raws li Hopper Priming Procedure.
	Tsis txaus cua nkag rau	Xyuas kiv cua. Xyuas kom nws ua haujlwm zoo thiab tsis muaj cua nkag. Ua raws
	Ntxuam	Kev saib xyuas thiab tu cov lus qhia yog qias neeg.

FAQs

Q: Kuv yuav daws qhov teeb meem ntawm tus pas ntsuas kub qhia qhov ntsuas kub li cas thaum lub tsev tawm?
A: Xyuas seb puas muaj kev puas tsuaj rau qhov ntsuas kub ntawm cov xov hlau thiab xyuas kom muaj kev sib raug zoo rau pawg tswj hwm. Hloov cov khoom puas yog tias tsim nyog.

Q: Kuv yuav ua li cas yog tias tus neeg haus luam yeeb tsim cov pa luam yeeb ntau dhau lossis tsis muaj xim?
A: Tshawb xyuas cov teeb meem xws li kub ambient kub, tsis muaj cua ntws los ntawm lub lauj kaub kub, roj tsis zoo, los yog muaj kev cuam tshuam hauv cov khoom noj. Ntxuav thiab tswj cov khoom kom haum.

Cov ntaub ntawv / Cov ntaub ntawv

Pit Boss P7-340 Controller Temp Control Program teeb tsa [ua pdf] Cov lus qhia P7-340, P7-540, P7-700, P7-1000, P7-340 Controller Temp Control Program Setting, P7-340, Controller Temp Control Program Chaw, Tswj Kev Pabcuam, Kev Pabcuam

Cov ntaub ntawv

• Cov neeg siv phau ntawv