Wireless Activity Event Counter
Qauv: R313FB
Cov neeg siv phau ntawv

Copyright © Netvox Technology Co., Ltd.
Daim ntawv no muaj cov ntaub ntawv txheej txheem uas yog tswv cuab ntawm NETVOX Technology. Nws yuav tsum raug tswj hwm nruj thiab yuav tsum tsis pub tshaj tawm rau lwm tog neeg, tag nrho lossis ib feem, yam tsis tau sau ntawv tso cai ntawm NETVOX Technology. Cov lus qhia tshwj xeeb yuav raug hloov pauv yam tsis tau ceeb toom ua ntej.

Taw qhia

Lub cuab yeej kuaj pom tus naj npawb ntawm kev txav lossis kev vibrations (xws li kuaj xyuas lub cev muaj zog ob peb zaug hauv ib hnub). Qhov siab tshaj plaws ntawm kev txav los yog kev vibrations tuaj yeem ncav cuag 2 32 zaug (tus nqi theoretical). Lub cuab yeej xa cov ntaub ntawv ntawm tus naj npawb ntawm kev txav los yog kev vibrations rau lub rooj vag rau kev ua haujlwm. Nws yog sib xws nrog LoRaWAN raws tu qauv.
LoRa Wireless Technology:
LoRa yog lub tshuab kev sib txuas lus wireless tshwj xeeb rau kev mus ntev thiab siv hluav taws xob tsawg.
Piv nrog rau lwm txoj kev sib txuas lus, LoRa kis tau spectrum modulation txoj kev zoo heev kom nthuav dav kev sib txuas lus. Dav siv nyob rau hauv ntev-ntev, tsis tshua muaj ntaub ntawv wireless kev sib txuas lus. Rau example, ntsuas ntsuas tsis siv neeg, tsim cov cuab yeej siv tshuab, wireless kev ruaj ntseg tshuab, kev saib xyuas kev lag luam. Cov yam ntxwv tseem ceeb suav nrog qhov me me, siv hluav taws xob tsawg, kis nrug deb, muaj peev xwm tiv thaiv kev cuam tshuam, thiab lwm yam.
LoRaWAN:
LoRaWAN siv LoRa thev naus laus zis los txheeb xyuas qhov kawg-rau-kawg tus qauv tshwj xeeb los xyuas kom muaj kev sib cuam tshuam ntawm cov khoom siv thiab lub rooj vag los ntawm cov tuam txhab sib txawv.

Qhov tshwm sim

Lub ntsiab nta

• Thov SX1276 wireless kev sib txuas lus module
• 2 ntu 3V CR2450 khawm roj teeb-powered
• Vibration counter detection
• Tau tshaj LoRaWAN ™ Class A
• Frequency-hopping kis spectrum technology
• Kev teeb tsa tsis tuaj yeem teeb tsa los ntawm cov software thib peb, cov ntaub ntawv tuaj yeem nyeem thiab tswb tuaj yeem teeb tsa ntawm SMS ntawv thiab email (yeem)
• Muaj tus thib peb platform: Kev Ua Haujlwm / ThingPark, TTN, MyDevices / Cayenne
• Txhim kho kev tswj fais fab kom ntev roj teeb lub neej

Roj teeb lub neej:

• Thov xa mus rau web: http://www.netvox.com.tw/electric/electric_calc.html
• Ntawm no website, cov neeg siv yuav nrhiav tau roj teeb lub neej rau ntau yam qauv ntawm txawv configurations.
  1. Qhov tseeb ntau yam yuav txawv nyob ntawm ib puag ncig.
  2. Lub roj teeb lub neej yog txiav txim siab los ntawm qhov ntsuas ntsuas zaus thiab lwm yam hloov pauv.

Teeb tsa kev qhia

On/off

Po \ket	Ntxig ob ntu ntawm 3V CR2450 khawm roj teeb thiab kaw lub roj teeb npog
kuv urn	Nias ib qho tseem ceeb ua haujlwm thiab cov cim ntsuab thiab liab flash ib zaug.
Tig tawm (Restore rau lub Hoobkas teeb tsa)	Nias thiab tuav lub luag haujlwm tseem ceeb rau 5 vib nas this thiab qhov taw qhia ntsuab flashes 20 zaug.
Fais fab tuag	Tshem cov roj teeb.
Nco tseg:	Tshem tawm thiab ntxig lub roj teeb; lub cuab yeej nco txog yav dhau los rau / tawm lub xeev los ntawm lub neej ntawd. On/off ncua sij hawm yog hais txog 10 vib nas this kom tsis txhob cuam tshuam ntawm capacitor inductance thiab lwm yam khoom siv hluav taws xob. Nias tej yam tseem ceeb thiab ntxig roj teeb rau tib lub sijhawm; nws yuav nkag mus rau qhov kev xeem engineers hom.

Kev koom tes hauv Network

Tsis tau koom nrog lub network	Qhib lub cuab yeej los tshawb xyuas lub network los koom. Qhov taw qhia ntsuab nyob twj ywm rau 5 vib nas this: kev vam meej Qhov ntsuas ntsuab tseem tawm: ua tsis tiav
Tau koom nrog lub network	Qhib lub cuab yeej los tshawb xyuas lub network yav dhau los kom koom nrog. Qhov ntsuas ntsuab nyob rau 5 vib nas this: ua tiav Qhov ntsuas ntsuab tseem tawm: ua tsis tiav
Tsis koom nrog lub network (thaum lub cuab yeej qhib)	Qhia tshuaj xyuas cov ntaub ntawv txheeb xyuas cov cuab yeej ntawm lub rooj vag lossis sab laj nrog koj lub chaw pabcuam platform.

Muaj nuj nqi

Nias thiab tuav rau 5 vib nas this	Rov qab mus rau lub Hoobkas teeb tsa / Tig tawm Qhov taw qhia ntsuab flashes 20 zaug: kev vam meej Qhov taw qhia ntsuab tseem tawm: ua tsis tiav
Nias ib zaug	Lub cuab yeej yog nyob rau hauv lub network: qhov taw qhia ntsuab flashes ib zaug thiab xa ib daim ntawv qhia Lub cuab yeej tsis nyob hauv lub network: qhov taw qhia ntsuab tseem tawm

Hom Pw Tsaug Zog

Cov cuab yeej tau qhib thiab hauv lub network

Lub sij hawm pw tsaug zog: Min Interval. Thaum daim ntawv tshaj tawm hloov pauv ntau tshaj qhov kev teeb tsa lossis lub xeev hloov pauv: xa cov ntaub ntawv tshaj tawm raws li Min Interval.

Tsawg Voltage Ceeb toom

Tsawg Voltage

2.4v XNUMX

Cov Ntaub Ntawv Qhia

Lub cuab yeej yuav tam sim xa ib daim ntawv qhia pob ntawv thiab cov ntaub ntawv qhia txog tus cwj pwm
Cov cuab yeej xa cov ntaub ntawv hauv kev teeb tsa ua ntej ua ntej kev teeb tsa tiav.
Default setting:

• MaxTime: Max Interval = 60 min = 3600s
• Min Lub Sijhawm: Min Interval = 60 min = 3600s
• BatteryVoltagKev hloov pauv: 0x01 (0.1V)
• ActiveThreshold: 0x0003 (Threshold range: 0x0003-0x00FF; 0x0003 yog qhov nkag siab tshaj plaws.)
• Deactivetime: 0x05 (Lub sij hawm Deactive: 0x01-0xFF)

ActiveThreshold:
Active Threshold = Tus nqi tseem ceeb ÷ 9.8 ÷ 0.0625
*Lub gravitational acceleration ntawm tus qauv atmospheric siab yog 9.8 m / s
*Qhov ntsuas qhov ntsuas ntawm qhov pib yog 62.5 mg
R313FB vibration tswb:
Thaum lub cuab yeej pom tau tias muaj kev txav los yog kev vibration, hloov ntawm lub xeev quiescent, lub cuab yeej tos rau DeactiveTime kom nkag mus rau hauv lub xeev quiescent thiab cov sij hawm suav tau nce los ntawm ib qho, thiab cov ntawv tshaj tawm ntawm cov xov tooj ntawm kev vibrations raug xa mus. Tom qab ntawd, nws rov pib dua los npaj rau kev kuaj pom tom ntej. Yog tias qhov kev vibration tseem tshwm sim thaum lub sijhawm ua haujlwm no, lub sijhawm rov pib dua kom txog thaum nws nkag mus rau hauv lub xeev quiescent.
Cov ntaub ntawv suav yuav tsis raug cawm thaum lub hwj chim tawm. Cov cuab yeej siv, Active vibration pib, thiab DeactiveTime tuaj yeem hloov pauv los ntawm cov lus txib xa los ntawm lub rooj vag.
Nco tseg:
Cov ntawv ceeb toom ncua sijhawm yuav raug ua haujlwm raws li lub hauv paus firmware uas yuav txawv.
Lub sijhawm nruab nrab ntawm ob daim ntawv tshaj tawm yuav tsum yog lub sijhawm tsawg kawg.
Thov xa mus rau Netvox LoRaWAN Daim Ntawv Thov Cov Ntaub Ntawv thiab Netvox Lora Command Resolver http://loraresolver.netvoxcloud.com:8888/page/index daws cov ntaub ntawv uplink.
Cov ntaub ntawv qhia kev teeb tsa thiab lub sijhawm xa khoom yog raws li hauv qab no:

Mb Interval (Unit: thib ob)	Max Interval (Unit: thib ob)	Qhia tau hloov	Tam sim no Hloov? Qhia tau hloov	Hloov tam sim no < Qhia hloov tau
Txhua tus naj npawb ntawm 1-65535 : kuv	Txhua tus naj npawb ntawm 1-65535 : kuv	Ua tsis tau 0.	Qhia rau Mb Interval	Qhia rau Max Interval

Exampcov ntaub ntawv configuration:
Ua: 0x07

Bytes	1	1	Var (Kho = 9 Bytes)
	CmdID	Ntaus ntawv	NetvoxPayLoadData

CmdID- 1 byte ib
DeviceType- 1 byte – Ntaus hom ntaus ntawv
Netvox PayLoadData- var bytes (Max = 9 bytes)

Kev piav qhia	Ntaus ntawv	Cm ID	DeviecT ypc ua	NetvoxPayLoadData
Config Daim ntawv qhia	R3I3FB	0 x 01	Txh50	MinTime (2bytes Chav: s)	MaxTime (2bytes Chav: s)	BatteryChange ry (lbyte Unit: 0.1V)	Khaws tseg (4 Bytes, Tsau Ox00)
Config Tshaj Qhia		Txh81		xwm txheej (0x00_ kev ua tiav)		Khaws tseg (8Bytes, Tsau Ox00)
NyeemConfig Daim ntawv qhia		Txh02		Khaws tseg (9Bytes, Tsau Ox00)
NyeemConfig Tshaj Qhia		0 x 82		MinTime (2bytes Chav: s)	MaxTime (2bytes Chav: s)	Roj teeb Hloov (Libyte Unit: 0.1v)	Khaws tseg (4 Bytes, Tsau Ox00)

1. Configure device parameters MinTime = 1min, MaxTime = 1min, BatteryChange = 0.1v
   PIB: 0150003C003C0100000000
   Cov cuab yeej rov qab:
   8150000000000000000000 (kev teeb tsa tiav)
   8150010000000000000000 (kev teeb tsa ua tsis tiav)
2. Nyeem ntaus ntawv configuration parameters
   Cov lej xov tooj: 0250000000000000000000
   Cov cuab yeej rov qab:
   825003C003C0100000000 (tam sim no ntaus ntawv configuration tsis)

   Kev piav qhia	Ntaus ntawv	Cmd ID	DeviceT ype ua	NetvoxPayLoadData
   SetR313F TypeReq	R313 FWB	0 x 03	Txh50	R313FT npo (1Byte,0x01_R313FA,0x02_R313 FB,0x03_R313FC)		Khaws tseg (8 Bytes, Tsau Ox00)
   SetR313F TypeRsp		Txh83		xwm txheej (0x00 ua tiav)		Khaws tseg (8 Bytes, Tsau Ox00)
   Txais R313F TypeReq		1304 x		Khaws tseg (9 Bytes, Tsau Ox00)
   Txais R313F TypeRsp		0 x 84		R313FT npo (1Byte,0x01 R313FA,0x02 R313 FB4Ox03_R313FC)		Khaws tseg (8 Bytes, Tsau Ox00)
   SetActive ThresholdReq		0 x 05		Qhov pib (2 Bytes)	Lub sijhawm tsis ua haujlwm (1Byte, Unit: Yog)		Khaws tseg (6 Bytes, Tsau Ox00)
   SetActive ThresholdRsp		0 x 85		xwm txheej (0x00 ua tiav)		Khaws tseg (8 Bytes, Tsau Ox00)
   GetActive ThresholdReq		0 x 06		Khaws tseg (9 Bytes, Tsau Ox00)
   GetActive ThresholdRsp		0 x 86		Qhov pib (2 Bytes)	Lub sijhawm tsis ua haujlwm (1Byte, Unit: Yog)		Khaws tseg (6 Bytes, Tsau Ox00)

3. Configure hom ntaus ntawv rau R313FB (0x02)
   Cov lej xov tooj: 0350020000000000000000
   Cov cuab yeej rov qab:
   8350000000000000000000 (kev teeb tsa tiav)
   8350010000000000000000 (kev teeb tsa ua tsis tiav)
4. Nyeem hom ntaus ntawv tam sim no
   Cov lej xov tooj: 0450000000000000000000
   Cov cuab yeej rov qab:
   8450020000000000000000 (Tam sim no ntaus ntawv hom R313FB)
5. Configure lub ActiveThreshold rau 10, DeactiveTime rau 6s
   Tus lej Downlink: 055000A060000000000000
   Cov cuab yeej rov qab:
   8550000000000000000000 (kev teeb tsa tiav)
   8550010000000000000000 (kev teeb tsa ua tsis tiav)
6. Nyeem hom ntaus ntawv tam sim no
   Cov lej xov tooj: 0650000000000000000000
   Cov cuab yeej rov qab:
   8650000A06000000000000 (tam sim no ntaus ntawv hom R313FB)

Example rau MinTime/MaxTime logic:
Example#1 raws li MinTime = 1 Teev, MaxTime = 1 Teev, Tshaj Tawm Hloov ie
BatteryVoltageChange = 0.1V.

Nco tseg:
MaxTime = MinTime. Cov ntaub ntawv tsuas yog qhia raws li MaxTime (MinTime) ntev tsis hais BtteryVoltageChange tus nqi.
Example#2 raws li MinTime = 15 Minutes, MaxTime = 1 Teev, Tshaj Tawm Hloov ie
BatteryVoltageChange = 0.1V

Example#3 raws li MinTime = 15 Minutes, MaxTime = 1 Teev, Tshaj Tawm Hloov ie
BatteryVoltageChange = 0.1V
Nco tseg:

1. Lub cuab yeej tsuas yog tsim thiab ua cov ntaub ntawv sampling raws li MinTime Interval. Thaum nws tsaug zog, nws tsis sau cov ntaub ntawv.
2. Cov ntaub ntawv sau tau muab piv nrog cov ntaub ntawv kawg tshaj tawm. Yog tias cov ntaub ntawv hloov pauv tus nqi ntau dua li ReportableChange tus nqi, lub cuab yeej ceeb toom raws li MinTime lub sijhawm.
   Yog tias cov ntaub ntawv sib txawv tsis ntau dua li cov ntaub ntawv kawg tau tshaj tawm, cov cuab yeej tshaj tawm raws li Maxime lub sijhawm.
3. Peb tsis pom zoo kom teeb tsa MinTime Interval tus nqi qis dhau. Yog tias MinTime Interval tsawg dhau lawm, lub cuab yeej sawv ntau zaus thiab lub roj teeb yuav poob sai sai.
4. Thaum twg lub cuab yeej xa daim ntawv tshaj tawm, tsis hais qhov tshwm sim cov ntaub ntawv hloov pauv, khawm thawb, lossis Maxime lub sijhawm, lwm lub voj voog ntawm MinTime / Maxime xam pib.

Kev teeb tsa

1. Tshem tawm 3M nplaum rau sab nraum qab ntawm lub cuab yeej thiab txuas lub cev rau saum npoo ntawm cov khoom du (thov tsis txhob lo rau ntawm qhov chaw ntxhib los tiv thaiv lub cuab yeej los ntawm kev poob tom qab siv ntev).
   Nco tseg:
   • So kom huv si saum npoo ua ntej kev teeb tsa kom tsis txhob muaj plua plav ntawm qhov chaw kom cuam tshuam rau qhov adhesion ntawm lub cuab yeej.
   • Tsis txhob nruab lub cuab yeej hauv lub thawv hlau thaiv lossis lwm yam khoom siv hluav taws xob nyob ib puag ncig kom tsis txhob cuam tshuam rau kev sib kis ntawm cov khoom siv wireless.
   
2. Lub cuab yeej kuaj pom ib qho kev txav los yog kev co, thiab nws yuav xa daim ntawv qhia tam sim ntawd.
   Tom qab lub tswb vibration, lub cuab yeej tos rau ib lub sijhawm (DeactiveTime- default: 5seconds, tuaj yeem hloov kho) kom nkag mus rau lub xeev quiescent ua ntej pib tshawb nrhiav tom ntej.
   Nco tseg:
   • Yog tias qhov kev vibration tseem tshwm sim thaum lub sijhawm txheej txheem no (lub xeev tsis meej), nws yuav ncua 5 vib nas this kom txog thaum nws nkag mus rau hauv lub xeev quiescent.
   • Thaum lub tswb vibration raug tsim, cov ntaub ntawv suav yuav raug xa mus.

Kev Tshawb Nrhiav Kev Ua Haujlwm (R313FB) yog qhov tsim nyog rau cov xwm txheej hauv qab no:

• Cov khoom muaj nqis (painting, nyab xeeb)
• Khoom siv
• Cov cuab yeej muaj
• Cov cuab yeej kho mob

Thaum nws yog ib qho tsim nyog los xyuas qhov muaj peev xwm ntawm cov khoom muaj nqis raug txav mus los thiab lub cev muaj zog khiav.

Cov cuab yeej txheeb ze

Qauv	Muaj nuj nqi	Qhov tshwm sim
R718MBA	Xa lub tswb thaum pom kev vibration lossis txav
R718 MB	Suav tus naj npawb ntawm kev vibrations lossis txav
R718 MBC	Suav lub sijhawm ntawm kev vibration lossis txav

Cov Lus Qhia Tseem Ceeb Saib Xyuas

Ua tib zoo saib xyuas cov hauv qab no txhawm rau ua tiav kev saib xyuas zoo tshaj plaws ntawm cov khoom:

• Khaws lub cuab yeej kom qhuav. Los nag, dej noo, lossis cov kua dej yuav muaj cov ntxhia thiab yog li ua rau cov hluav taws xob hluav taws xob. Yog tias lub cuab yeej ntub dej, thov kom qhuav tag.
• Tsis txhob siv lossis khaws cov cuab yeej hauv qhov chaw muaj plua plav lossis qias neeg. Nws tuaj yeem ua rau nws cov khoom sib cais thiab cov khoom siv hluav taws xob puas.
• Tsis txhob cia lub cuab yeej nyob rau hauv cov cua kub heev. Qhov kub thiab txias tuaj yeem ua rau lub neej luv luv ntawm cov khoom siv hluav taws xob, rhuav tshem cov roj teeb, thiab deform lossis yaj qee qhov yas.
• Tsis txhob khaws cov cuab yeej rau hauv qhov chaw txias heev. Txwv tsis pub, thaum kub nce mus rau qhov kub thiab txias, noo noo yuav tsim sab hauv, uas yuav ua kom puas lub rooj tsavxwm.
• Tsis txhob muab pov, khob lossis co lub cuab yeej. Kev tuav tsis zoo ntawm cov cuab yeej tuaj yeem rhuav tshem cov vaj huam sib luag sab hauv thiab cov qauv tsim.
• Tsis txhob ntxuav lub cuab yeej nrog cov tshuaj muaj zog, tshuaj detergents, lossis cov tshuaj detergents.
• Tsis txhob siv lub cuab yeej nrog cov xim. Smudges yuav thaiv lub cuab yeej thiab cuam tshuam rau kev ua haujlwm.
• Tsis txhob muab lub roj teeb tso rau hauv qhov hluav taws kub, lossis lub roj teeb yuav tawg. Cov roj teeb puas tseem tuaj yeem tawg.

Tag nrho cov saum toj no siv rau koj lub cuab yeej, roj teeb, thiab cov khoom siv ntxiv. Yog tias ib qho cuab yeej ua haujlwm tsis zoo, thov coj mus rau qhov chaw pabcuam uas tau tso cai nyob ze tshaj plaws los kho.

Cov ntaub ntawv / Cov ntaub ntawv

netvox R313FB Wireless Activity Event Counter [ua pdf] Tus neeg siv phau ntawv R313FB, Wireless Activity Counter

Cov ntaub ntawv

• Cov neeg siv phau ntawv