PXIe-6396 Multifunction Input lossis Output Module
Cov neeg siv phau ntawv qhia

Phau ntawv qhia no piav qhia txog yuav ua li cas kom paub meej tias koj NI cov ntaub ntawv tau txais (DAQ) cov cuab yeej ua haujlwm tau zoo. Nruab koj daim ntawv thov thiab tsav tsheb software, tom qab ntawd koj lub cuab yeej, siv cov lus qhia ntim nrog koj lub cuab yeej.

Kev sib txuas ntawm qhov sib txawv ntawm cov chaw tsim khoom thiab koj qhov kev sim qub txeeg qub teg.
1-800-915-6216 Ib
www.apexwaves.com
sales@apexwaves.com

COMREHENSIVE SERVICES
Peb muaj kev sib tw kho thiab calibration kev pab cuam, nrog rau cov ntaub ntawv siv tau yooj yim thiab cov peev txheej rub tawm dawb.
Muag koj cov nyiaj seem
Peb yuav tshiab, siv, decommissioned, thiab seem seem ntawm txhua NI series. Peb ua haujlwm tawm qhov kev daws teeb meem zoo tshaj plaws kom haum rau koj tus kheej xav tau.

Muag Rau Nyiaj Ntsuab
Tau txais credit
Trade-In Deal
TSIS MUAJ NI HARDWARE IN STOCK & READY SHIP
Peb cov khoom tshiab, Tshaj Tawm Tshiab, Kho dua tshiab, thiab kho dua tshiab NI Hardware.

Paub meej Device Recognition

Ua kom tiav cov kauj ruam hauv qab no:

1. Tua tawm MAX los ntawm ob-nias NI MAX icon ntawm lub desktop, lossis (Windows 8) los ntawm txhaj NI MAX los ntawm NI Launcher.
2. Nthuav Devices thiab Interfaces kom paub meej tias koj lub cuab yeej raug kuaj pom. Yog tias koj siv lub hom phiaj RT tej thaj chaw deb, nthuav cov Chaw Taws Teeb, nrhiav thiab nthuav koj lub hom phiaj, thiab tom qab ntawd nthuav cov cuab yeej thiab cov interfaces. Yog tias koj lub cuab yeej tsis tau teev tseg, nias kom refresh tus ntoo configuration. Yog tias lub cuab yeej tseem tsis tau paub, xa mus rau ni.com/support/daqmx.
   Rau Network DAQ ntaus ntawv, ua cov hauv qab no:
   Yog hais tias lub Network DAQ ntaus ntawv teev nyob rau hauv Devices and Interfaces» Network Devices, right-click it and select Add Device.
   Yog tias koj lub Network DAQ ntaus ntawv tsis tau teev tseg, nyem rau ntawm Network Devices, thiab xaiv Nrhiav Network NI-DAQmx Devices. Hauv Add Device Manually teb, ntaus Network DAQ ntaus lub npe tswv lossis IP chaw nyob, nyem lub pob +, thiab nyem Ntxiv Xaiv Cov Khoom Siv. Koj lub cuab yeej yuav raug ntxiv rau hauv Cov Khoom Siv thiab Cov Khoom Sib Txuas » Network Devices.
   Nco tseg Yog tias koj tus neeg rau zaub mov DHCP tau teeb tsa kom tau txais kev sau npe tus tswv lub npe, lub cuab yeej sau npe lub npe lub npe ua haujlwm li cDAQ- - , NWS- los yog ENET- . Koj tuaj yeem pom tus lej xov tooj ntawm lub cuab yeej. Yog tias koj nrhiav tsis tau tus tswv lub npe ntawm daim foos ntawd, nws yuav raug hloov kho los ntawm lub neej ntawd mus rau lwm tus nqi.
   Yog tias koj tseem tsis tuaj yeem nkag mus rau koj lub Network DAQ ntaus ntawv, nyem qhov Nyem qhov no rau cov lus qhia daws teeb meem yog tias koj lub cuab yeej tsis tshwm sim nyob rau hauv Nrhiav Network NI-DAQmx Devices qhov rai lossis mus rau ni.com/info thiab nkag mus rau Info Code netdaqhelp.
   Tswv yim Koj tuaj yeem sim NI-DAQmx daim ntawv thov yam tsis muaj kev txhim kho kho vajtse los ntawm kev siv NI-DAQmx simulated ntaus ntawv. Rau cov lus qhia ntawm kev tsim NI-DAQmx simulated li thiab importing
   NI-DAQmx simulated ntaus ntawv configurations rau lub cev pab kiag li lawm, nyob rau hauv MAX, xaiv Help»Help Topics» NI-DAQmx»MAX Pab rau NI-DAQmx.
3. Txoj cai-nias lub cuab yeej thiab xaiv Kev Ntsuas Tus Kheej. Thaum qhov kev ntsuam xyuas tus kheej tiav lawm, cov lus qhia tau hais tias muaj kev pov thawj tiav lossis yog tias muaj teeb meem tshwm sim. Yog tias muaj teeb meem tshwm sim, xa mus rau ni.com/support/daqmx.
4. Rau NI M thiab X Series PCI Express pab kiag li lawm, right-click lub cuab yeej thiab xaiv tus kheej-Calibrate. Lub qhov rais qhia txog cov xwm txheej ntawm calibration. Nyem Ua kom tiav.

Configure lub Device Settings

Qee cov khoom siv, xws li NI-9233 thiab qee cov khoom siv USB, tsis xav tau cov khoom siv rau kev teeb tsa, RTSI, topologies, lossis jumper nqis. Yog tias koj tab tom txhim kho cov khoom siv nkaus xwb yam tsis muaj cov khoom tsim tau, hla mus rau kauj ruam tom ntej. Configure txhua lub cuab yeej nrog configurable chaw uas koj nruab:

1. Right-click lub npe ntaus ntawv thiab xaiv Configure. Nco ntsoov nyem lub npe ntaus ntawv nyob rau hauv daim nplaub tshev rau lub kaw lus (Kuv Qhov System lossis Chaw Taws Teeb) thiab NI-DAQ API uas koj xav tswj lub cuab yeej.
   Rau Network DAQ li, nyem lub npe ntaus ntawv thiab tom qab ntawd lub Network Settings tab los teeb tsa lub network teeb tsa. Yog xav paub ntxiv txog kev teeb tsa Network DAQ li, saib koj cov ntaub ntawv ntaus ntawv.
2. Configure cov cuab yeej cuab tam.
   • Yog tias koj siv cov khoom siv ntxiv, ntxiv cov ntaub ntawv ntxiv.
   • Rau IEEE 1451.4 transducer electronic data sheet (TEDS) sensors thiab accessories, configure the device and add the accessory as prescribed. Nyem Scan rau TEDS. Txhawm rau teeb tsa TEDS sensors txuas ncaj qha mus rau lub cuab yeej, hauv MAX, txoj cai-nias lub cuab yeej hauv qab Cov Khoom Siv thiab Cov Khoom Siv thiab xaiv Configure TEDS.
3. Nyem OK kom lees txais cov kev hloov pauv.

Nruab Cov Cuab Yeej Cuab Yeej lossis Hloov Cov Khoom Siv
Yog tias koj lub kaw lus suav nrog SCXI cov teeb liab txias modules, Cov Khoom Siv Teeb Meem Teeb Meem (SCC) xws li SC cov neeg nqa khoom thiab SCC modules, lub davhlau ya nyob twg, lossis hloov cov qauv, xa mus rau cov lus qhia pib rau cov khoom siv rau nruab thiab teeb tsa lub teeb liab lossis hloov kho vajtse.
Txuas cov sensors thiab cov kab teeb liab
Txuas cov sensors thiab cov kab teeb liab rau lub davhlau ya nyob twg thaiv lossis cov khoom siv txuas ntxiv rau txhua lub cuab yeej ntsia.
Koj tuaj yeem nrhiav cov khoom siv davhlau ya nyob twg / pinout qhov chaw hauv MAX, NI-DAQmx Pab, lossis cov ntaub ntawv ntaus ntawv. Nyob rau hauv MAX, right-click lub npe ntaus ntawv nyob rau hauv Devices thiab Interfaces, thiab xaiv
Ntaus Pinouts.
Yog xav paub ntxiv txog cov sensors, xa mus rau ni.com/sensors. Yog xav paub ntxiv txog IEEE 1451.4 TEDS ntse sensors, xa mus rau ni.com/teds. Yog tias koj siv SignalExpress, xa mus rau Siv NI-DAQmx nrog Koj Daim Ntawv Thov Software.
Khiav Test Panels
Siv lub MAX xeem vaj huam sib luag raws li hauv qab no.

1. Hauv MAX, nthuav Devices thiab Interfaces lossis Devices thiab Interfaces»Network Devices.
2. Right-click the device to test, and select Test Panels to open a test panel for the xaiv ntaus ntawv.
3. Nyem rau ntawm lub tab nyob rau sab saum toj thiab pib sim cov cuab yeej ua haujlwm, lossis Pab rau cov lus qhia ua haujlwm.
4. Yog tias lub vaj huam sib luag kuaj pom cov lus yuam kev, xa mus rau ni.com/support.
5. Nyem Kaw kom tawm ntawm lub vaj huam sib luag xeem.

Siv qhov ntsuas NI-DAQmx

NI-DAQmx Channels thiab Tasks
Lub cev channel yog lub davhlau ya nyob twg lossis tus pin uas koj tuaj yeem ntsuas lossis tsim cov teeb liab analog lossis digital.
Ib lub channel virtual qhia lub npe rau lub cev channel thiab nws qhov chaw, xws li kev sib txuas ntawm lub davhlau ya nyob twg, hom kev ntsuas lossis tiam, thiab cov ntaub ntawv ntsuas. Hauv NI-DAQmx, cov channel virtual yog qhov tseem ceeb rau txhua qhov kev ntsuas.
Ib txoj hauj lwm yog ib los yog ntau dua virtual channel nrog lub sij hawm, triggering, thiab lwm yam khoom. Conceptually, ib txoj hauj lwm sawv cev rau kev ntsuas los yog tiam los ua. Koj tuaj yeem teeb tsa thiab khaws cov ntaub ntawv teeb tsa hauv ib txoj haujlwm thiab siv txoj haujlwm hauv daim ntawv thov. Xa mus rau NI-DAQmx Pab kom tiav cov ntaub ntawv hais txog cov channel thiab cov haujlwm.
Siv DAQ Assistant los teeb tsa cov channel virtual thiab cov haujlwm hauv MAX lossis hauv koj daim ntawv thov software.

Configure ib Task Siv DAQ Assistant los ntawm MAX
Ua kom tiav cov kauj ruam hauv qab no los tsim ib txoj haujlwm siv DAQ Assistant hauv MAX:

1. Hauv MAX, right-click Data Neighborhood thiab xaiv Tsim Tshiab los qhib DAQ Assistant.
2. Hauv Tsim Tshiab qhov rai, xaiv NI-DAQmx Task thiab nyem Next.
3. Xaiv Tau Cov Teeb Meem lossis Tsim Cov Teeb Meem.
4. Xaiv hom I/O, xws li analog input, thiab ntsuas hom, xws li voltage.
5. Xaiv lub cev (s) channel siv thiab nyem Next.
6. Lub npe ua haujlwm thiab nyem Finish.
7. Configure ib tug channel chaw. Txhua lub cev channel koj muab rau ib txoj haujlwm tau txais lub npe virtual channel. Txhawm rau hloov kho qhov kev tawm tswv yim lossis lwm qhov chaw, xaiv cov channel. Nyem Paub meej rau cov ntaub ntawv qhia txog lub cev. Configure lub sij hawm thiab triggering rau koj txoj hauj lwm. Nyem Khiav.

Siv NI-DAQmx nrog Koj Daim Ntawv Thov Software

DAQ Assistant yog sib xws nrog version 8.2 lossis tom qab ntawm LabVIEW, version 7.x lossis tom qab ntawm Lab Windows™/CVI™ lossis Measurement Studio, lossis nrog version 3 lossis tom qab ntawm Signal Express.
Signal Express, ib qho yooj yim-rau-siv configuration-raws li cov cuab yeej rau cov ntaub ntawv sau npe daim ntawv thov, yog nyob rau ntawm Pib » Tag nrho cov kev pab cuam » National Instruments » NI Signal Express los yog (Windows 8) NI Launcher.
Txhawm rau pib nrog kev nrhiav tau cov ntaub ntawv hauv koj daim ntawv thov software, xa mus rau cov lus qhia:

Daim ntawv thov	Tutorial Qhov Chaw
LabVIEW	Mus rau Pab "LabVIEW Pab. Tom ntej no, mus rau Kev Pib Nrog LabVIEW» Pib nrog DAQ» Noj NI-DAQmx Kev Ntsuas hauv LabVIEW.
Lab Windows/CVI	Mus rau Pab "Cov ntsiab lus. Tom ntej no, mus rau Siv Lab Windows / CVI * Cov Ntaub Ntawv Tau Txais "Nqa NI-DAQmx Kev Ntsuas hauv Lab Windows / CVI.
Kev ntsuas Studio	Mus rau NI Measurement Studio Pab “Pib Pib Nrog Kev Ntsuas Studio Chav Kawm Cov Tsev Qiv Ntawv “Measurement Studio Walkthroughs» Waikthrough: Tsim Kev Ntsuas Studio NI-DAQmx Daim Ntawv Thov.
Teeb liab Express	Mus rau Pab “Kev Ntsuas NI-DAQmx hauv Kev Qhia Qhia.

Examples
NI-DAQmx suav nrog example cov kev pab cuam los pab koj pib tsim ib daim ntawv thov. Hloov kho example code thiab khaws cia rau hauv daim ntawv thov, lossis siv examples los tsim ib daim ntawv thov tshiab lossis ntxiv example code rau ib daim ntawv thov uas twb muaj lawm.
Mus nrhiav LabVIEW, Lab Windows/CVI, Measurement Studio, Visual Basic, thiab ANSI C examples, mus rau ni.com/info thiab nkag mus rau Info Code daqmxexp. Rau ntxiv examples, refer to ib zone.ni.com.
Yuav khiav examples tsis muaj kho vajtse ntsia, siv NI-DAQmx simulated ntaus ntawv. Hauv MAX, xaiv Pab “Cov Ntsiab Lus Pab” NI-DAQmx» MAX Pab rau NI-DAQmx thiab nrhiav cov khoom siv simulated.

Kev daws teeb meem

Yog tias koj muaj teeb meem txhim kho koj cov software, mus rau ni.com/support/daqmx. Rau kev daws teeb meem kho vajtse, mus rau ni.com/support thiab sau koj lub npe ntaus ntawv, lossis mus rau ni.com/kb.
Yog tias koj xav tau rov qab koj National Instruments hardware rau kev kho lossis ntsuas cov cuab yeej, xa mus rau ni.com/info thiab nkag mus rau Info Code rdsenn los pib qhov Kev Tso Cai Xa Khoom Rov Qab (RMA) txheej txheem.
Mus rau ni.com/info thiab nkag mus rau rddq8x rau cov npe ua tiav ntawm NI-DAQmx cov ntaub ntawv thiab lawv qhov chaw nyob.

Xav paub ntxiv
Tom qab koj nruab NI-DAQmx, NI-DAQmx cov ntaub ntawv software nkag tau los ntawm Pib» Txhua Qhov Kev Pabcuam "National Instruments"I-DAQ»NI-DAQmx cov ntaub ntawv npe lossis (Windows 8) NI Launcher. Cov kev pab ntxiv muaj nyob online ntawm ni.com/gettingstarted.
Koj tuaj yeem nkag mus rau cov ntaub ntawv hauv online los ntawm txoj cai-nias koj lub cuab yeej hauv MAX thiab xaiv Pab » Cov Ntaub Ntawv Hauv Online. Lub qhov rais browser qhib rau ni.com/manuals nrog cov txiaj ntsig ntawm kev tshawb nrhiav cov ntaub ntawv muaj feem cuam tshuam. Yog koj tsis muaj Web nkag mus, cov ntaub ntawv rau cov cuab yeej txhawb nqa tau suav nrog hauv NI-DAQmx media.

Kev Pabcuam Thoob Ntiaj Teb

Yog xav paub ntxiv txog kev txhawb nqa, xa mus rau ni.com/support rau kev nkag mus rau txhua yam los ntawm kev daws teeb meem thiab kev txhim kho daim ntawv thov kev pab tus kheej rau email thiab xov tooj kev pab los ntawm NI Application Engineers. Mus saib ni.com/zone rau cov khoom qhia, example kod, webcasts, thiab video.
Mus saib ni.com/services ib rau NI Factory Installation Services, kho, txuas ntxiv warranty, calibration, thiab lwm yam kev pab cuam.
Txhawm rau kom ntsuas qhov tseeb, NI lub Hoobkas ntsuas tag nrho cov khoom siv siv tau thiab teeb tsa daim ntawv pov thawj Kev Ntsuas Yooj Yim, uas koj tuaj yeem tau txais online ntawm ni.com/calibration.
Mus saib ni.com/training ib rau kev cob qhia tus kheej, eLearning virtual chav kawm, sib tham sib CDs, ntaub ntawv pov thawj cov ntaub ntawv pov thawj, lossis rau npe rau tus kws qhia coj, kev cob qhia tes ntawm cov chaw thoob ntiaj teb.
Rau kev txhawb nqa muaj nyob ntawm National Instruments chaw ua haujlwm thoob ntiaj teb, mus saib ni.com, lossis tiv tauj koj lub chaw haujlwm hauv zos ntawm ni.com/contact. National Instruments corporate headquarters nyob ntawm 11500 North Mopac Expressway, Austin, Texas, 78759-3504.

Xa mus rau NI Trademarks thiab Logo Guidelines ntawm ni.com/trademarks Yog xav paub ntxiv txog National Instruments trademarks. Lwm cov khoom lag luam thiab cov npe tuam txhab tau hais hauv no yog cov cim lag luam lossis cov npe lag luam ntawm lawv cov tuam txhab. Rau patents npog National Instruments cov khoom / thev naus laus zis, xa mus rau qhov chaw tsim nyog: Pab" Patents hauv koj software, patents.txt file ntawm koj cov xov xwm, lossis National Instruments Patent Notice ntawm  ni.com/patents.
Koj tuaj yeem nrhiav cov ntaub ntawv hais txog daim ntawv tso cai siv kawg (EULAs) thiab cov ntawv ceeb toom kev cai lij choj thib peb hauv readme file rau koj cov khoom NI. Xa mus rau Export Cov Ntaub Ntawv Ua Raws Cai ntawm ni.com/legal/export-ua raws cai rau National Instruments thoob ntiaj teb kev lag luam ua raws txoj cai thiab yuav ua li cas thiaj li tau txais HTS cov lej cuam tshuam, ECCNs, thiab lwm cov ntaub ntawv ntshuam / xa tawm.

© 2003–2013 National Instruments. Txhua txoj cai.

Cov ntaub ntawv / Cov ntaub ntawv

NATIONAL INSTRUMENTS PXIe-6396 Multifunction Input lossis Output Module [ua pdf] Cov neeg siv phau ntawv qhia 373235, 323235, 373737, PXIe-6396 Multifunction Input lossis Output Module, PXIe-6396, Multifunction Input lossis Output Module, Input lossis Output Module, Module

Cov ntaub ntawv

• Cov neeg siv phau ntawv