UC-5100 Series
Daim ntawv qhia kev txhim kho ceevVersion 1.2, Lub Ib Hlis 2021

Kev Pabcuam Tiv Thaiv Cov Ntaub Ntawv www.moxa.com/support

Tshajview

UC-5100 Series embedded computers yog tsim los rau industrial automation applications. Cov khoos phis tawj muaj 4 RS-232/422/485 tag nrho cov teeb liab serial chaw nres nkoj nrog adjustable rub-up thiab rub-down resistors, dual CAN ports, dual LANs, 4 digital input channels, 4 digital output channels, SD socket, thiab a Mini PCIe socket rau wireless module nyob rau hauv ib tug compact vaj tse nrog yooj yim pem hauv ntej-kawg nkag mus rau tag nrho cov kev sib txuas lus interfaces.
Cov npe qauv thiab daim ntawv teev cov pob
UC-5100 Series suav nrog cov qauv hauv qab no:
UC-5101-LX: Kev lag luam kev lag luam nrog 4 serial chaw nres nkoj, 2 Ethernet ports, SD socket, 4 DI, 4 DO, -10 txog 60 ° C ua haujlwm kub ntau yam
UC-5102-LX: Kev lag luam kev lag luam nrog 4 qhov chaw nres nkoj, 2 Ethernet chaw nres nkoj, SD qhov (socket), Mini PCIe qhov (socket), 4 DI, 4 DO, -10 txog 60 ° C ua haujlwm kub ntau
UC-5111-LXKev lag luam kev lag luam nrog 4 serial chaw nres nkoj, 2 Ethernet ports, SD socket, 2 CAN ports, 4 DI, 4 DO, -10 txog 60 ° C kev khiav hauj lwm kub ntau yam
UC-5112-LX: Kev lag luam kev lag luam nrog 4 serial chaw nres nkoj, 2 Ethernet chaw nres nkoj, SD socket, Mini PCIe socket, 2 CAN chaw nres nkoj, 4 DI, 4 DO, -10 txog 60 ° C ua haujlwm kub ntau
UC-5101-T-LX: Kev lag luam kev lag luam nrog 4 serial chaw nres nkoj, 2 Ethernet ports, SD socket, 4 DI, 4 DO, -40 txog 85 ° C ua haujlwm kub ntau yam
UC-5102-T-LX: Kev lag luam kev lag luam nrog 4 qhov chaw nres nkoj, 2 Ethernet chaw nres nkoj, SD qhov (socket), Mini PCIe qhov (socket), 4 DI, 4 DO, -40 txog 85 ° C ua haujlwm kub ntau
UC-5111-T-LX: Kev lag luam kev lag luam nrog 4 qhov chaw nres nkoj, 2 Ethernet chaw nres nkoj, SD socket, 2 CAN chaw nres nkoj, 4 DI, 4 DO, -40 txog 85 ° C ua haujlwm kub ntau
UC-5112-T-LX: Kev lag luam suav nrog 4 serial chaw nres nkoj, 2 Ethernet ports, SD socket, 2 CAN ports, Mini PCIe socket, 4 DI, 4 DO, -40 txog 85 ° C kev khiav hauj lwm kub ntau yam
Nco tseg Kev khiav hauj lwm kub ntawm qhov dav kub qauv yog:
-40 txog 70 ° C nrog LTE accessory ntsia
-10 txog 70 ° C nrog Wi-nkaus accessory ntsia
Ua ntej txhim kho UC-5100 lub computer, xyuas kom meej tias lub pob muaj cov khoom hauv qab no:

• UC-5100 Series computer
• Console kab
• Lub hwj chim nkaus
• Daim ntawv qhia kev teeb tsa ceev (luam tawm)
• Warranty card

Qhia rau koj tus neeg muag khoom yog tias ib qho ntawm cov khoom saum toj no ploj lawm lossis puas lawm.
Nco tseg Lub console cable thiab lub hwj chim jack tuaj yeem pom nyob rau hauv qab cov ntaub ntawv molded cushioning hauv lub thawv khoom.

Qhov tshwm sim

UAS-5101

UAS-5102

UAS-5111

UAS-5112 LED Qhov taw qhia
Kev ua haujlwm ntawm txhua qhov LED tau piav qhia hauv cov lus hauv qab no:

LED npe	xwm txheej	Muaj nuj nqi
Hwj chim	Ntsuab	Lub hwj chim qhib thiab lub cuab yeej ua haujlwm ib txwm
	Tawm	Fais fab tuag
Npaj txhij	Daj	OS tau ua tiav enabled thiab lub cuab yeej yog npaj txhij
Ethernet	Ntsuab	Nyob ruaj khov: 10 Mbps Ethernet txuas Blinking: Kev xa cov ntaub ntawv tseem tab tom ua
	Daj	Nyob ruaj khov: 100 Mbps Ethernet txuas Blinking: Kev xa cov ntaub ntawv tseem tab tom ua
	Tawm	Kev sib kis ceev qis dua 10 Mbps lossis tsis txuas nrog cable
Serial (Tx)	Ntsuab	Serial chaw nres nkoj yog kis cov ntaub ntawv
	Tawm	Serial chaw nres nkoj tsis xa cov ntaub ntawv
Serial (Rx)	Daj	Serial chaw nres nkoj tau txais cov ntaub ntawv
	Tawm	Serial chaw nres nkoj tsis tau txais cov ntaub ntawv
L1/L2/L3 (UC-5102/5112)	Daj	Tus naj npawb ntawm glowing LEDs qhia qhov teeb liab lub zog Txhua LEDs: Zoo heev L1 & L2 LEDs: Zoo L1 LED: Tsis zoo
	Tawm	Tsis pom wireless module
L1/L2/L3 (UC-5101/5111)	Yellow / Tawm	Programmable LEDs txhais los ntawm cov neeg siv

Pib dua khawm

Lub khoos phis tawj UC-5100 tau muab lub pob pib dua, uas nyob ntawm lub vaj huam sib luag pem hauv ntej ntawm lub khoos phis tawj. Txhawm rau reboot lub computer, nias lub pob pib dua 1 thib ob.
Rov qab mus rau Default Button
Lub UC-5100 kuj tau muab nrog Reset rau Default khawm uas tuaj yeem siv los rov pib dua lub operating system rov qab mus rau lub Hoobkas ua haujlwm.
Nias thiab tuav lub Reset to Default khawm nyob nruab nrab ntawm 7 mus rau 9 vib nas this kom rov pib lub computer mus rau lub Hoobkas teeb tsa. Thaum lub pob rov pib dua yog tuav cia, Ready LED yuav ntsais ib zaug txhua ob. Npaj LED yuav ua kom khov kho thaum koj tuav lub pob tas li 7 mus rau 9 vib nas this. Tso lub pob nyob rau hauv lub sij hawm no mus thauj lub Hoobkas default settings.

Txhim kho lub Computer

DIN-rail Mounting
Aluminium DIN-rail txuas phaj los txuas rau cov khoom casing. Txhawm rau txhim kho UC-5100 rau ntawm DIN rail, nco ntsoov tias lub caij nplooj ntoos hlav hlau tawv yog tig mus rau sab saud thiab ua raws li cov kauj ruam no.
Kauj ruam 1
Ntxig rau sab saum toj ntawm DIN rail mus rau hauv qhov chaw nyob hauv qab lub caij nplooj ntoos hlav hlau tawv nyob rau sab sauv ntawm DIN-rail mounting cov khoom.  Kauj ruam 2
Thawb lub UC-5100 mus rau DIN rail kom txog rau thaum DIN-rail txuas bracket snaps rau hauv qhov chaw. Cov Kev Xav Tau
Nco ntsoov nyeem thiab ua raws li cov kev tiv thaiv kev nyab xeeb no ua ntej pib nrog kev teeb tsa ntawm ib qho khoom siv hluav taws xob:

• Siv cov kev sib cais rau txoj kev xaim hluav taws xob thiab cov khoom siv. Yog tias cov hluav taws xob thaiv hluav taws xob thiab cov cuab yeej txuas hluav taws xob yuav tsum hla, xyuas kom cov xov hlau nyob ntawm qhov chaw sib tshuam.
  Nco tseg Tsis txhob khiav teeb liab los yog kev sib txuas lus thiab hluav taws xob thaiv nyob rau hauv tib lub xaim conduit. Txhawm rau kom tsis txhob cuam tshuam, cov xov hlau uas muaj cov yam ntxwv sib txawv yuav tsum tau sib cais.
• Siv hom teeb liab kis tau los ntawm ib lub xov hlau los txiav txim seb cov xov hlau twg yuav tsum tau muab cais tawm. Txoj cai ntawm tus ntiv tes xoo yog cov xaim uas muaj cov yam ntxwv zoo sib xws tuaj yeem muab khi ua ke.
• Khaws cov kab hluav taws xob nkag thiab cov khoom siv hluav taws xob sib cais.
• Nws yog ib qho tseem ceeb qhia rau koj tias koj sau cov kab txuas rau txhua yam khoom siv rau kev txheeb xyuas yooj yim.

CEEB TOOM
Kev nyab xeeb ua ntej!
Nco ntsoov tshem tawm cov hlua hluav taws xob ua ntej txhim kho thiab / lossis txuas koj lub khoos phis tawj UC-5100 Series.
Kev Ceeb Toom!
Xam qhov siab tshaj plaws tam sim no hauv txhua lub zog xaim thiab cov xaim sib xws. Saib xyuas tag nrho cov lej hluav taws xob dictating qhov siab tshaj plaws tam sim no tso cai rau txhua tus xaim loj. Yog tias qhov tam sim no nce siab tshaj qhov ntsuas siab tshaj plaws, cov xaim hluav taws xob tuaj yeem ua rau overheat, ua rau muaj kev puas tsuaj loj rau koj cov khoom siv. Cov cuab yeej no yog npaj los muab los ntawm cov khoom siv hluav taws xob sab nraud uas tau lees paub, cov khoom tsim tawm uas ua tau raws li SELV thiab LPS cov cai.
Kub ceev ceev!
Ceev faj thaum tuav lub tsev. Thaum lub tsev yog ntsaws rau hauv, cov khoom siv sab hauv tsim kom muaj cua sov, thiab yog li lub qhov rooj sab nrauv yuav hnov ​​​​qhov kub ntawm qhov kov.
Cov cuab yeej no yog npaj rau kev teeb tsa hauv Cov Chaw Txwv Kev Nkag Mus.
Txuas lub Hwj chim
Txuas 9 mus rau 48 VDC fais fab kab rau lub davhlau ya nyob twg thaiv, uas yog txuas rau UC-5100 Series computer. Yog hais tias lub hwj chim muab tau zoo, lub hwj chim LED yuav ci lub teeb ntsuab. Lub hwj chim input qhov chaw thiab tus pin txhais tau qhia nyob rau hauv uas nyob ib sab
daim duab.

SG: Lub Chaw Tiv Thaiv Kev Tiv Thaiv (qee zaum hu ua Protected Ground) kev sib cuag yog kev sib cuag hauv qab ntawm 3-pin fais fab davhlau ya nyob twg thaiv txuas thaum viewed los ntawm lub kaum sab xis qhia ntawm no. Txuas cov hlau mus rau ib qho chaw hlau uas tsim nyog los yog rau cov ntsia hlau grounding saum lub cuab yeej.
Nco tseg Kev ntsuam xyuas ntawm UC-5100 Series yog 9-48 VDC, 0.95-0.23 A.
Grounding Lub Tsev
Grounding thiab xaim routing pab txo cov suab nrov vim muaj kev cuam tshuam ntawm electromagnetic (EMI). Khiav qhov kev sib txuas hauv av los ntawm lub davhlau ya nyob twg thaiv qhov txuas mus rau qhov chaw hauv av ua ntej txuas lub zog. Nco ntsoov tias cov khoom no yog npaj rau mounted rau ib tug zoo-av mounting nto, xws li ib tug hlau vaj huam sib luag.
Txuas mus rau Chaw Nkag Nkag Chaw
UC-5100's console chaw nres nkoj yog RJ45-raws li RS-232 chaw nres nkoj nyob rau hauv pem hauv ntej vaj huam sib luag. Nws yog tsim los rau kev txuas mus rau serial console terminals, uas muaj txiaj ntsig zoo rau viewnyob rau hauv khau raj li lus, los yog rau debugging system boot li teeb meem.

PIN	Teeb liab
1	-
2	-
3	GND
4	TxD
5	RxD
6	-
7	-
8	-

Txuas rau Network
Cov chaw nres nkoj Ethernet nyob rau ntawm lub vaj huam sib luag pem hauv ntej ntawm UC-5100. Tus pin assignments rau Ethernet chaw nres nkoj yog qhia nyob rau hauv daim duab hauv qab no. Yog tias koj siv koj tus kheej cable, xyuas kom tseeb tias tus pin txoj haujlwm ntawm Ethernet cable connector phim tus pin txoj haujlwm ntawm Ethernet chaw nres nkoj.

Pin	Teeb liab
1	Tx +
2	Tx-
3	Rx +
4	-
5	-
6	Txx-
7	-
8	-

Txuas mus rau Serial Device
Cov chaw nres nkoj serial yog nyob rau hauv pem hauv ntej vaj huam sib luag ntawm UC-5100 computer. Siv ib tug serial cable los txuas koj lub serial ntaus ntawv mus rau lub computer qhov chaw nres nkoj serial. Cov chaw nres nkoj serial no muaj RJ45 txuas thiab tuaj yeem teeb tsa rau RS-232, RS-422, lossis RS-485 kev sib txuas lus. Tus pin qhov chaw thiab cov haujlwm tau qhia hauv cov lus hauv qab no.   

Pin	RS-232	RS-422	RS-485
1	DSR	-	-
2	RTS	TxD+	-
3	GND	GND	GND
4	TxD	TxD-	-
5	RxD	RxD+	Cov ntaub ntawv +
6	DCD	RxD-	Cov ntaub ntawv-
7	CTS	-	-
8	DTR	-	-

Txuas rau DI/DO DeviceUC-5100 Series computer los nrog 4 lub hom phiaj kev nkag siab dav dav thiab 4 lub hom phiaj tso zis txuas. Cov connectors no nyob rau saum vaj huam sib luag ntawm lub computer. Xa mus rau daim duab sab laug rau tus pin txhais ntawm cov connectors. Rau txoj kev xaim, xa mus rau cov duab hauv qab no.

Txuas mus rau CAN Device
UC-5111 thiab UC-5112 yog muab nrog 2 CAN chaw nres nkoj, tso cai rau cov neeg siv txuas mus rau CAN ntaus ntawv. Tus pin qhov chaw thiab cov haujlwm tau qhia hauv cov lus hauv qab no:

PIN	Teeb liab
1	CAN_H
2	KEV_L
3	CAN_GND
4	-
5	-
6	-
7	CAN_GND
8	-

Txuas lub Cellular/Wi-Fi Module thiab kav hlau txais xov
Lub khoos phis tawj UC-5102 thiab UC-5112 tuaj nrog ib qho Mini PCIe socket rau kev txhim kho lub cellular lossis Wi-Fi module. Unfasten ob lub screws ntawm sab xis vaj huam sib luag kom tshem tawm lub hau thiab nrhiav qhov chaw ntawm lub qhov (socket). Lub cellular module pob suav nrog 1 cellular module, thiab 2 screws. Cov kav hlau txais xov ntawm tes yuav tsum tau yuav nyias kom haum rau koj cov kev xav tau ntawm kev teeb tsa.

1. Ua raws li cov kauj ruam no rau nruab lub cellular module.
   Teem lub kav hlau txais xov cables ib sab kom yooj yim ntawm kev teeb tsa thiab tshem tawm lub wireless module socket raws li qhia hauv daim duab.
   
2. Ntxig lub cellular module rau hauv lub qhov (socket) thiab fasten ob lub screws (nrog rau hauv lub pob) nyob rau sab saum toj ntawm lub module. Peb pom zoo kom siv lub tweezer thaum txhim kho lossis tshem lub module.
   
3. Txuas qhov dawb kawg ntawm ob lub kav hlau txais xov cable ntawm ib sab ntawm cov ntsia hlau raws li qhia hauv daim duab.
4. Hloov lub hau thiab tuav nws nrog ob lub hau.
   
5. Txuas cov kav hlau txais xov ntawm tes rau cov khoom sib txuas.
   Kav hlau txais xov connectors nyob rau pem hauv ntej vaj huam sib luag ntawm lub computer.

Wi-Fi module pob suav nrog 1 Wi-Fi module, thiab 2 screws. Lub kav hlau txais xov adapters thiab Wi-nkaus kav hlau txais xov yuav tsum tau yuav nyias kom haum rau koj cov kev xav tau ntawm kev teeb tsa. Ua raws li cov kauj ruam no rau nruab Wi-Fi module.

1. Teem lub kav hlau txais xov cables ib sab kom yooj yim ntawm kev teeb tsa thiab tshem tawm lub wireless module socket raws li qhia hauv daim duab.
2. Ntxig lub cellular module rau hauv lub qhov (socket) thiab fasten ob lub screws (nrog rau hauv lub pob) nyob rau sab saum toj ntawm lub module. Peb pom zoo kom siv lub tweezer thaum txhim kho lossis tshem lub module.
3. Txuas qhov dawb kawg ntawm ob lub kav hlau txais xov cable ntawm ib sab ntawm cov ntsia hlau raws li qhia hauv daim duab.
4. Hloov lub hau thiab tuav nws nrog ob lub hau.
   
5. Txuas cov kav hlau txais xov adapters rau cov khoom txuas ntawm lub vaj huam sib luag pem hauv ntej ntawm lub khoos phis tawj.
6. Txuas lub kav hlau txais xov Wi-Fi rau cov kav hlau txais xov adapters.

Txhim kho Micro SIM Cards

Koj yuav tsum tau nruab ib daim npav Micro SIM ntawm koj lub computer UC-5100.
Ua raws li cov kauj ruam no los nruab Micro SIM daim npav.

1. Tshem cov ntsia hlau ntawm lub hau uas nyob rau ntawm lub vaj huam sib luag pem hauv ntej ntawm UC-5100.
2. Ntxig Micro SIM daim npav rau hauv lub qhov (socket).
   Nco ntsoov tias koj muab daim npav tso rau hauv txoj cai.Txhawm rau tshem tawm daim npav Micro SIM, tsuas yog thawb lub Micro SIM daim npav thiab tso nws.

Nco tseg: Muaj ob daim npav Micro SIM tso cai rau cov neeg siv nruab ob daim npav Micro SIM ib txhij. Txawm li cas los xij, tsuas yog ib daim npav Micro SIM tuaj yeem siv tau.

Txhim kho SD Card

UC-5100 Series khoos phis tawj tuaj nrog lub qhov (socket) rau kev nthuav dav ntxiv uas tso cai rau cov neeg siv nruab ib daim npav SD.
Ua raws li cov kauj ruam no rau nruab SD card:

1. Unfasten lub hau thiab tshem tawm lub hau npog. SD lub qhov (socket) nyob rau ntawm lub vaj huam sib luag pem hauv ntej ntawm lub computer.
   
2. Ntxig SD daim npav rau hauv lub qhov (socket). Xyuas kom meej tias daim npav tau muab tso rau hauv txoj cai.
3. Hloov lub hau thiab tuav lub hau ntswj ntawm lub hau kom ruaj ntseg lub hau.

Txhawm rau tshem tawm daim npav SD, tsuas yog thawb daim npav thiab tso nws.

Kho qhov CAN DIP Hloov

UC-5111 thiab UC-5112 khoos phis tawj tuaj nrog ib qho CAN DIP hloov rau cov neeg siv los kho qhov CAN termination resistor tsis. Txhawm rau teeb tsa DIP hloov, ua cov hauv qab no:

1. Nrhiav DIP hloov qhov chaw nyob rau saum vaj huam sib luag ntawm lub computer
   
2. Kho qhov chaw raws li xav tau. Tus nqi ON yog 120Ω, thiab tus nqi pib yog OFF.

Kho qhov Serial Port DIP Hloov

UC-5100 khoos phis tawj tuaj nrog DIP hloov rau cov neeg siv los kho cov rub-up / rub-down resistors rau qhov chaw nres nkoj serial. Lub serial chaw nres nkoj DIP hloov yog nyob rau hauv qab vaj huam sib luag ntawm lub computer.
Kho qhov chaw raws li xav tau. ON qhov chaw sib raug rau 1KΩ thiab OFF teeb tsa sib raug rau 150KΩ. Qhov kev teeb tsa pib yog OFF. Txhua qhov chaw nres nkoj muaj 4 tus pins; koj yuav tsum hloov tag nrho 4 tus pins ntawm qhov chaw nres nkoj ib txhij los kho tus nqi ntawm qhov chaw nres nkoj.            

Cov ntaub ntawv / Cov ntaub ntawv

	MOXA UC-5100 Series Arm Based Computers [ua pdf] Daim ntawv qhia kev teeb tsa UC-5100 Series Arm Based Computers, UC-5100 Series, Arm Based Computers, Raws li Computers, Computers
	MOXA UC-5100 Series Arm Based Computers [ua pdf] Daim ntawv qhia kev teeb tsa UC-5101, UC-5102, UC-5111, UC-5112, UC-5100 Series, UC-5100 Series Arm Based Computers, Arm Based Computers, Based Computers, Computers
	MOXA UC-5100 Series Arm Based Computers [ua pdf] Daim ntawv qhia kev teeb tsa UC-5101, UC-5102, UC-5111, UC-5112, UC-5100 Series, UC-5100 Series Arm Based Computers, Arm Based Computers, Based Computers, Computers
	MOXA UC-5100 Series Arm-Based Computers [ua pdf] Daim ntawv qhia kev teeb tsa UC-5100 Series Arm-Based Computers, UC-5100 Series, Arm-Based Computers, Raws li Computers, Computers

Cov ntaub ntawv

• Cov neeg siv phau ntawv