ZKBio CVSecurity Release Notes
Date: May 2025 | Document Version: 1.5
Introduction
Thank you for choosing our product. Please read the instructions carefully before operation. Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only.
For further details, please visit our Company's website www.zkteco.com.
Disclaimer
ZKTeco is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned by their respective owners.
This manual contains information on the operation and maintenance of the ZKTeco equipment. Copyright in all the documents, drawings, etc. in relation to the ZKTeco supplied equipment vests in and is the property of ZKTeco. The contents hereof should not be used or shared by the receiver with any third party without express written permission of ZKTeco.
The contents of this manual must be read as a whole before starting the operation and maintenance of the supplied equipment. If any of the content(s) of the manual seems unclear or incomplete, please contact ZKTeco before starting the operation and maintenance of the said equipment.
It is an essential pre-requisite for the satisfactory operation and maintenance that the operating and maintenance personnel are fully familiar with the design and that the said personnel have received thorough training in operating and maintaining the machine/unit/equipment. It is further essential for the safe operation of the machine/unit/equipment that personnel has read, understood, and followed the safety instructions contained in the manual.
In case of any conflict between terms and conditions of this manual and the contract specifications, drawings, instruction sheets or any other contract-related documents, the contract conditions/documents shall prevail. The contract-specific conditions/documents shall Apply in priority.
ZKTeco offers no warranty, guarantee, or representation regarding the completeness of any information contained in this manual or any of the amendments made thereto. ZKTeco does not extend the warranty of any kind, including, without limitation, any warranty of design, merchantability, or fitness for a particular purpose.
ZKTeco does not assume responsibility for any errors or omissions in the information or documents which are referenced by or linked to this manual. The entire risk as to the results and performance obtained from using the information is assumed by the user.
ZKTeco shall in no event be liable to the user or any third party for any incidental, consequential, indirect, special, or exemplary damages, including, without limitation, loss of business, loss of profits, business interruption, loss of business information or any pecuniary loss, arising out of, in connection with, or relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages.
This manual and the information contained therein may include technical, other inaccuracies or typographical errors. ZKTeco periodically changes the information herein which will be incorporated into new additions/amendments to the manual. ZKTeco reserves the right to add, delete, amend, or modify the information contained in the manual from time to time in the form of circulars, letters, notes, etc. for better operation and safety of the machine/unit/equipment. The said additions or amendments are meant for improvement /better operations of the machine/unit/equipment and such amendments shall not give any right to claim any compensation or damages under any circumstances.
ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment malfunctions due to any non-compliance of the instructions contained in this manual (ii) in case of operation of the machine/unit/equipment beyond the rate limits (iii) in case of operation of the machine and equipment in conditions different from the prescribed conditions of the manual.
The product will be updated from time to time without prior notice. The latest operation procedures and relevant documents are available on http://www.zkteco.com.
If there is any issue related to the product, please contact us.
ZKTeco Headquarters
Address: ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China.
Phone: +86 769 - 82109991
Fax: +86 755 - 89602394
For business-related queries, please write to us at sales@zkteco.com.
To know more about our global branches, visit www.zkteco.com.
About the Company
ZKTeco is one of the world's largest manufacturers of RFID and Biometric (Fingerprint, Facial, and Fingervein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks. Our security solutions are multi-lingual and localized in over 18 different languages. At the ZKTeco state-of-the-art 700,000 square foot ISO9001-certified manufacturing facility, we control manufacturing, product design, component assembly, and logistics/shipping, all under one roof. The founders of ZKTeco have been determined for independent research and development of biometric verification procedures and the productization of biometric verification SDK, which was initially widely Applied in PC security and identity authentication fields. With the continuous enhancement of the development and plenty of market Applications, the team has gradually constructed an identity authentication ecosystem and smart security ecosystem, which are based on biometric verification techniques. With years of experience in the industrialization of biometric verifications, ZKTeco was officially established in 2007 and now has been one of the globally leading enterprises in the biometric verification industry owning various patents and being selected as the National High-tech Enterprise for 6 consecutive years. Its products are protected by intellectual property rights.
About the Manual
This manual introduces the Release Notes for ZKBio CVSecurity. All figures displayed are for illustration purposes only. Figures in this manual may not be exactly consistent with the actual products.
Document Conventions
GUI Conventions
For Software
| Convention | Description |
|---|---|
| Bold font | Used to identify software interface names e.g., OK, Confirm, Cancel. |
| > Convention | Multi-level menus are separated by these brackets. For example, File > Create > Folder. |
For Device
| Convention | Description |
|---|---|
| <> | Button or key names for devices. For example, press <OK>. |
| [ ] | Window names, menu items, data table, and field names are inside square brackets. For example, pop up the [New User] window. |
| / | Multi-level menus are separated by forwarding slashes. For example, [File/Create/Folder]. |
Symbols
| Convention | Description |
|---|---|
| ? | This represents a note that needs to pay more attention to. |
| ? | The general information which helps in performing the operations faster. |
| ⭐ | The information which is significant. |
| ⚠️ | Care taken to avoid danger or mistakes. |
| ❗ | The statement or event that warns of something or that serves as a cautionary example. |
Statement
1. ZKBio CVSecurity offers three updates: Major Updates, Minor Updates, and Patch. Major Updates: Major updates include significant updates in modules or functionalities of the Software and are recommended to all users. Minor Updates: Minor updates include improvements in a few functionalities of the Software. Patch: The bugs are fixed in the Patch version.
2. Version Number Description:
Precautions When Upgrading ZKBio CVSecurity
1. ZKBio Security V5000 3.0.0_R (except Video and VMS modules) can be upgraded to ZKBio CVSecurity. 2. ZKBio Security 3.2.0.0 cannot be upgraded directly to ZKBio CVSecurity.
| Current Version | Upgrade Path | Upgrade Method |
|---|---|---|
| ZKBioSecurity 3.2.0.0_R | ZKBioSecurity V5000 4.1.R > ZKBio CVSecurity 6.0.0_R | 1. Using ZKBioSecurity V5000 4.1.x_R migration data function to upgrade from 3200 to V5000 4.1.x_R. 2. Then overwrite installation with ZKBio CVSecurity 5.3.0_R |
| ZKBioSecurity V5000 2.0.x_R | ||
| ZKBioSecurity V5000 3.0.x_R | ZKBio CVSecurity 6.6.0_R | Using overwrite installation method with ZKBio CVSecurity 6.6.0_R. |
| ZKBioSecurity V5000 4.0.x_R | ||
| ZKBioSecurity V5000 4.1.x_R | ||
| ZKBio CVSecurity 5.0.0_R | ||
| ZKBio CVSecurity 5.1.1_R | ||
| ZKBio CVSecurity 5.2.0_R | ZKBio CVSecurity 6.0.0_R | |
| ZKBio CVSecurity 5.3.0_R | ||
| ZKBio CVSecurity 5.4.0_R |
(Note: With the Intelligent Analytics module removed in V6.3.0, devices from previous versions will require re-adding to the Smart Video Surveillance module after upgrade. This one-time action ensures continued access to advanced video analytics capabilities.)
Version 6.6.0
Release Date: 2025/6/15 | Update Type: Major Updates
New Features and Improvements:
| No. | Updated Module | Description |
|---|---|---|
| 1 | Homepage | Homepage video dashboard: Add video warning analysis report |
| 2 | Platform | Compatible with Windows Server 2025 |
| 3 | Space Management | Support batch import/export of spaces |
| 4 | Space Management | Integrate Zoom for online meetings creation. |
| 5 | Space Management | Support meeting extension |
| 6 | Video Intercom | Online configuration of shortcut keys for one-click direct call |
| 7 | Video Intercom | Support parameter-controlled App call types: optional extension number call or SIP call |
| 8 | Linkage Center | Support global linkage across all modules and output actions (access control, video modules) |
| 9 | Service Center | Map Center: 2) Quickly filter points of different modules 3) Support warning event statistics and real-time viewing |
| 10 | Scenario Center | Scenario Center - Add "Bright Kitchen" feature: Back kitchen behavior analysis |
| 11 | Scenario Center | Move the emergency evacuation points of access control module to the Scenario Center with functional refinement: 1) Support defining statistical range 2) Add operation configuration steps 3) Add statistical panel |
| 12 | Personnel | Support AMT-PVR-50 palm vein device registration |
| 13 | Personnel | After personnel App modifies facial photos, admin needs to review in Pending Review |
| 14 | Access Control | Device management-Set Up :add palm/face comparison threshold settings |
| 15 | ACMS | Optimize synchronization of virtual card-bound personnel information to ACMS platform |
| 16 | Attendance | Auto report push optimization: Support SFTP transfer for enhanced security |
| 17 | Visitor | After inviting visitors, it supports directly generating access QR codes. |
| 18 | Visitor | It supports adding visitors to the specified blocklist library in the video: Smart Video Surveillance - Device Management -> More -> Face Library |
| 19 | Database | MS SQL database supports Windows Authorization. |
| 20 | API | Parking module API additions: 1. Parking fee calculation interface 2. Gate opening interface after payment |
| 21 | API | Add space management module API |
| 22 | Audio Broadcast Integration | Add PA module integrating ITC products for cross-module linkage |
| 23 | Integration | Integrate RS100 to read Vietnamese ID cards |
| 24 | Parking | Add support for E-LPRC500 |
| 25 | Parking | Support LPRS8000 and synchronized LED ads |
| 26 | Intrusion Alarm | Add support for ZKTeco alarm hosts (Models: IA01-HP01-01H; A01-HP0201H) |
| 27 | Elevator Control | DCS optimization: 1. Fix KONE call unresponsiveness 2. Fix KONE server port modification 3. Add enable/disable elevator server menu |
| 28 | App | 1. Personnel Page: Add mobile clock-in, attendance calendar, and Applications (remedial sign, business trip, leave, overtime); support Approval 2. My Activities: Add meeting extension 3. Visitor invitation: Add direct pass mode (QR code generated immediately) |
| 29 | Smart Video Surveillance | Support streaming media forwarding services. |
| 30 | Scenario Center | Optimization of the People Counting Feature |
Version 6.5.0
Release Date: 2025/3/30 | Update Type: Major Updates
New Features and Improvements:
- [Energy Saving]The Energy Saving module now supports a terminal pairing function.
- [Mobile App]The ZKBio Zexus Mobile App supports intelligent control of IoT terminals, including terminal pairing and gateway binding.
- [Mobile App] Fixed an issue where alarm events were not being pushed when Administrator logged into the App backend.
- [Video Intercom] Fixed a synchronization issue where personnel access permissions were lost during batch updates to VEX Series devices.
Version 6.4.1
1. [Visitor] Fixed the issue that when enabling the cloud visitor link for parameters, the QR codes for visitor review/check - in/passage use the H5 cloud link. Due to the absence of a cloud page, accessing the link showed a 404 error.
2. [Video Surveillance] Fixed the display issue of the intelligent - time period menu in Intelligent Video after the upgrade.
3. [Video Surveillance] Resolved the problem that when adding personnel in HR, the slow distribution of personnel information occurred due to a large number of video devices.
4. [Service Center] Fixed the display issue of the linkage center menu after the upgrade.
Version 6.4.0
Release Date: 2024/11/30 | Update Type: Major Updates
New Features and Improvements
| No | Updated Module | Key Update |
|---|---|---|
| 1 | Space Management | New module implementation with the following features: 1. Mobile Booking System: added compatibility for Facekiosk H10A devices for mobile booking system: real-time space occupancy monitoring, detailed space information display (capacity, dimensions, available facilities) and instant booking confirmation. 2. Automated Notifications: email and mobile App notifications for booking confirmations. And meeting reminders and updates. 3.Comprehensive Reporting System: space utilization analytics, booking history and trends and custom report generation. |
| 2 | Energy Saving | 1. Device Management: IoT gateway integration and offers terminal device monitoring and control. 2. Scene Management: supports attribute to scene linkage and cross-module integration, for instance, binding with space management. |
| 3 | Service Center | 1. Scenario Centre: a new "Real-time Attendance" Application, employs the use of an IP camera for real-time attendance monitoring. The IP camera captures a face template, and integrates with ZKBio CVSecurity to facilitates the real-time attendance function. 2. Event Center Renovation: Users can query and export all activity records for an individual in access control, attendance, parking, and consumption using their personnel ID or name. 3. Event Center - Event Types: Incorporate SOP issues handling. |
| 4 | Visitor | 1. Self-Registration System: a cloud-based visitor registration system. Visitor can pre-register remotely. 2. Enhanced Security: protect visitor data by end-to-end encryption and protect the local server address. |
| 5 | Video Intercom | 1. Introduced contact list feature and with personnel assignment capabilities. 2. Included an operation guide for SIP video intercom functionality. |
| 6 | Time & Attendance | 1. Global attendance rule configuration: Newly added support for overtime levels. 2. Attendance reports now support the statistics of overtime levels. |
| 7 | Elevator Control | Included basement floors (B/L) in the elevator control panel EC10 and EC16. |
| 8 | Platform | 1. Added operation video link 2. Privacy protection is configured according to roles, implementing different privacy protection policies for different users and roles. 3. Precise search support now available. |
| 9 | API | 1. The API has added the getDepartmentList feature. 2. The API has added an Advanced Access interface to implement getWhoIsInsideZoneList and getWhoIsInsideByZone. 3. Introduced the new API for parking module. |
| 10 | Parking | 1. Two-factor authentication: one LPR device being able to bind with multiple access control devices. 2. Supports for self-developed LCD screen devices. 3. Added support for LPRC500 devices. 4. Added hourly discount options. |
| 11 | Active Directory | AD has added multiple OU dynamic rules to retrieve corresponding data, and increased field settings to filter and obtain personnel information. |
| 12 | License | 1. Added system maintenance schedule display. 2. License expiration email alerts for administrator |
| 13 | Smart Video Surveillance | 1. Global Linkage: After intelligent video alerts, support for triggering the activation of Muster Point. 2. Video Playback and Backup: Added a feature for video playback and historical alarm video backup, including progress indicators for downloads. 3. Channel Preview Management: a. Customize preview window positions by drag-and-drop. b. Rearrange display layout without affecting device channel order. c. Access via Video > Video Management > Preview d. Flexible visualization while maintaining original channel configuration. 4. ZKIVA-Edge X1 Integration:Full management capability and alarm monitoring. With enhanced alarm linkage. |
| 14 | Mobile App | 1. The Personnel page has added Applications for Book Space, My Activities, and Space Service. 2. The Administrator page has added the Personnel Registration Application. 3. The Personnel App supports modification of user photos. 4. The Notification Center has been revamped to support notifications, visitor dynamics, personal verification records, and system messages. |
Version 6.3.0
Release Date: 2024/06/30 | Update Type: Major Updates
New Features and Improvements
| No Updated | Module | Key Update |
|---|---|---|
| 1 | Video Intercom Module | Unlock New Capabilities with SIP Protocol Integration: 1) Supports PBX Server or cloud SIP mode. 2) Supports extension number and SIP account management. 3) Supports assigning SIP accounts to personnel, devices, and system users. 4) Supports voice interaction configuration. 5) Supports access control alarm linkage to call designated personnel. |
| 2 | Active Directory | 1) After enabling/ disabling personnel in Active Directory (AD), the changes will be synchronized to ZKBio CVSecurity. 2) After deleting personnel in Active Directory (AD), the corresponding personnel will be synchronized and deleted from ZKBio CVSecurity. |
| 3 | System | The "system tray" adds functionality for modifying software access ports and ADMS communication ports. |
| 4 | Mobile Credentials | Integrate with ACMS to add, delete, and synchronize virtual card data on the ACMS platform. |
| 5 | Access Control | 1) Video Linkage supports configuring the video recording duration before and after the event trigger. 2) Supports access control event linkage for video intercom to call designated numbers 3) Supports ZKBio CV460 access control + video surveillance all-in-one controller. 4) Support for InBio Pro Plus+ KF1000 Plus: support for collecting and synchronizing face templates for KF1000 Plus; support for event logging and reporting, as well as alarm events for readers online/offline and dismantled; software support for KF1000 readers' firmware upgrades. |
| 6 | Time & Attendance Module | 1) Added ability to import personnel cycle scheduling. 2) Attendance report supports attendance status display. |
| 7 | DCS Integration | Integration New/Optimized Requirements for Mitsubishi Electric ELSGW/OBU Gateway: 1) When selecting ELSGW/OBU, the standard service port is fixed and limited to 52,000; other ports are invalid. 2) Added fields for "Floor Count" and "Floor name starts at" with adjustments allowing for a maximum of 12 elevators in the elevator group. 3) When the service name "ELSGW" is selected, the "ALL BANK" option in the elevator group can be removed because ELSGW does not support allocation across multiple banks. 4) When the service name "ELSGW" is selected, the "ALL BANK" option in the elevator group can be removed because ELSGW does not support allocation across multiple banks. |
| 8 | Visitor | Report Optimization: Add daily visit report, weekly visit report, and monthly visit report to facilitate visitor traffic statistics. |
| 9 | Intelligent Analytic | 1) Remove the Intelligent Analytic module. 2) Migrate ZKIVA-Edge device management to the Smart Video Surveillance module. 3) Migrate Scene Center to Service Center. |
| 10 | Service Center | Addition of Scene Center: Offers smoother operational configuration, advanced monitoring dashboards, and a more sleek and visually Appealing page design. |
| 11 | Map Center | In the Map Center, add quick buttons for locking and unlocking door icons. |
| 12 | Parking | Real-time monitoring supports 4/8/16 channel preview. |
| 13 | Smart Video Surveillance | 1) New design for the management interface, combined camera and device management interface. 2) Support for ZKIVA-Edge T1/T2 management. 3) New CCTV client UI design with additional features. 4) Decoding on the wall supports video rotational patrol. 5) E-map PTZ camera control. |
| 14 | App | Add Applications for video intercom and remote elevator calling. |
Version 6.1.3
Release Date: 2024/06/17 | Update Type: Patch
Security Patch Notes:
- 1. Fixed Arbitrary File Upload Path Deletion Issue Post-Login: Resolved a vulnerability where unauthorized deletion of file paths could occur after logging in, which could lead to directory traversal.
- 2. Fixed Unauthorized Hierarchical Resource Access Post-Login: Addressed an issue that allowed users to access resource information across directory levels based on the resource path name after logging in.
- 3. Fixed Form Export Vulnerability Post-Login: Rectified a security flaw where the password field in the export form was removable, enabling unauthorized export of data without a password.
- 4. Strengthened Cross-Site Illegal Character Interception: Enhanced security measures to better intercept and block illegal characters in cross-site interactions to mitigate the risk of injection attacks.
- 5. Fixed Unauthorized System Administrator Creation Post-Login: Corrected a privilege escalation vulnerability that allowed users to create system administrator accounts without proper authorization after logging in.
Version 6.1.0
Release Date: 2024/01/03 | Update Type: Major Updates
New Features and Improvements
| NO. | Updated Module | Updated Description |
|---|---|---|
| 1 | Setup Wizard | Wizards for common modules: Access Control, Parking, Visitor modules |
| 2 | System | Menu favorites function; after favorites will go directly to the page |
| 3 | Muster Point | New support for counting the number of visitors |
| 4 | Video Intercom | Add visual intercom module: Equipment management: add equipment, bind the unit corresponding to the equipment. Resident management: add residents, personnel and unit binding, personnel rights issued to the door machine. Open Door Record Reporting: Open Door Record Reporting of Door Opening Machine, and at the same time carry which unit opened the door remotely. |
| 5 | Elevator Control | DCS Integration with Mitsubishi/KONE: Realization of DOP+COP Application |
| 6 | Elevator Control | Add Access Disabled function (EC16 and DCS support) |
| 7 | Elevator Control | Elevator Control-Reader supports optional downlink wiegand format |
| 8 | Visitor | Add "Accompanying Person" and "Remark" fields in visitor registration H5 page. |
| 9 | Visitor | Visitor defense function: when enabled, the visitor will be added to the allowed list of the video. |
| 10 | Access Control | Add the field of "access control authority group" to view device access control rules. |
| 11 | Time & Attendance | Attendance customization report support |
| 12 | Time & Attendance | Transaction supports displaying latitude and longitude (supported by Horus H1). |
| 13 | Attendance | Attendance point supports selecting intelligent scene cameras for video attendance. |
| 14 | Parking | Fixed car advent support message linkage function |
| 15 | Smart Video Surveillance | The video preview window supports intelligent function overlay and displays the delineation window |
| 16 | Smart Video Surveillance | Add "All Alarms" to the triggered alarm types in the alarm log, so that users can query all types of alarm logs at once. |
| 17 | Smart Video Surveillance | The electronic map of video module increases the distance of monitoring points. |
| 18 | Smart Video Surveillance | 1. Unify the entrance of Email linkage notification. The entrance is put into Global Linkage. 2. Global Linkage, new support for WhatsApp, line, email. |
| 19 | Card Production | Single and double-sided printing is available for card production. |
| 20 | Personnel | Disable function optimization: When the personnel menu disable the personnel, the corresponding access control, ladder control, channel, Locker, consumption and other modules of the personnel permissions will be invalidated; |
| 21 | Personnel | Biophoto added photo quality guide, size, dimensions, white background, or use case (ID photo format), etc. |
| 22 | System | Database backup - new function to backup photos |
| 23 | System | Console support for one-click export of software logs |
| 24 | Map Center | New devices that support smart scenes and show alerts for smart scenes |
| 25 | ZKBio CVSecurity App | 1. Hybrid cloud connection 2. App function operation |
Version 6.0.2
Release Date: 2023/11/14 | Update Type: Patch
Bug Fixed
- 1. Fixed the PULL Devices incorrect online/offline status.
- 2. Fixed the software hang sometimes issue when sync data to PULL Device.
- 3. Fixed the issue that the video map management menu not show when upgrade from old version.
Version 6.0.1
Release Date: 2023/08/15 | Update Type: Patch
New Features and Improvements
- 1. Newly add options of manual patrol or auto patrol of Video Patrol function.
- 2. Allow user batch modify the duration of each cameras of video patrol plan.
- 3. Newly add photo quality guidance when user uploading BioPhotos.
Bug Fixed
- 1. Fixed the issue of upgrading the attendance device's firmware with return error return value -3.
- 2. Fixed the issue of batch sync personnel to PULL device but only one personnel get synced.
- 3. Fixed the issue that the Global Linkage menu was disAppear of Intelligent Analytic Module after upgrade from old ZKBio CVSecurity version to newest.
Version 6.0.0
Release Date: 2023/06/30 | Update Type: Major Updates
New Features and Improvements
| No. | Updated Module | Function | Updated Content Description |
|---|---|---|---|
| 1 | Personnel | BioPhoto | Newly added support for uploading BioPhoto, separated from User Photo. |
| 2 | Personnel | BioPhoto | Supports batch import of Biophoto. |
| 3 | Personnel | BioPhoto | Supports viewing of Biophoto. |
| 4 | Elevator Control | DCS Application | Integration with KONE for DCS Application. |
| 5 | Parking | Added field for parking time | Real-time monitoring, reports, and API now support parking time field. |
| 6 | Parking | TBM Ticket Dispenser License Control | Ticket dispenser license control is separate from LPR. |
| 7 | Parking | Car ID + TBM Ticket Dispenser | Car ID and TBM ticket dispenser can be used simultaneously. |
| 8 | Access Control | Real-time monitoring supports live preview of doors | Supports preview before remote door control. Supports live preview of doors when clicking on the door icon in the map center. |
| 9 | Access Control | Real-time monitoring supports live preview of doors | Supports preview before remote door control. Supports live preview of doors when clicking on the door icon in the map center. |
| 10 | Time& Attendance | Added support for more attendance report types | Added support more types of attendance reports, a total of 19 types of reports. |
| 11 | System | Language self-translation and import | 1. Provide translation platform for users to translate languages by themselves. 2. Support self-service import of translated language packages in the console. |
| 12 | System | Supports Two-Factor Authorization login | Supports two-factor authentication login to enhance login security.. |
| 13 | System | Multi-server | Supports synchronization of personnel data between multiple servers. |
| 14 | System | Global Message Notification | Supports configuring global message linkage in system modules. |
| 15 | Access Control Module | Optimized intermodule message linkage | Supports real-time sending of personal access records to the person who generated them (via SMS, Email, WhatsApp). |
| 16 | Access Control Module | Optimized intermodule message linkage | Supports sending notification messages to designated personnel after linkage trigger (SMS, Email, WhatsApp, Line). |
| 17 | Muster Point | Optimized intermodule message linkage | Muster Point: when an emergency occurs and the Muster Point is activated, a notification of "Emergency Assembly" is sent to all employees in the department (via SMS, Email, WhatsApp). |
| 18 | Muster Point | Optimized intermodule message linkage | Muter Point: supports sending statistical reports on emergency assembly on a regular basis to designated personnel (via Email). |
| 19 | Muster Point | Optimized intermodule message linkage | Regularly sends daily or all access event reports to designated personnel (via Email) |
| 20 | Muster Point | Optimized intermodule message linkage | Sends messages to designated personnel when an access event occurs (via Email, SMS) |
| 21 | Time & Attendance Module | Optimized intermodule message linkage | Supports sending personal attendance records to the corresponding individuals (via SMS, Email, WhatsApp). |
| 22 | Time & Attendance Module | Optimized intermodule message linkage | Regularly sends attendance reports to designated personnel (via Email). |
| 23 | Elevator Control | Optimized intermodule message linkage | Supports sending notification messages to designated personnel after linkage trigger (SMS, Email, WhatsApp, Line). |
| 24 | Entrance Control | Optimized intermodule message linkage | Supports sending personal access records to corresponding individuals (via SMS, Email, WhatsApp). Supports sending notification messages to designated personnel after linkage trigger (via Email). |
| 25 | Locker Management | Optimized intermodule message linkage | Supports sending personal access records to corresponding individuals (via SMS, Email, WhatsApp). |
| 26 | Locker Management | Optimized intermodule message linkage | Supports sending notification messages to designated personnel after linkage trigger (via SMS, Email, WhatsApp, Line). |
| 27 | Intelligent Video | Optimized intermodule message linkage | Supports sending notification messages to designated personnel after linkage trigger (via SMS). |
| 28 | Intelligent Video | Optimized intermodule message linkage | Supports sending notification messages to designated personnel after linkage trigger for intelligent analysis (via SMS, Email, WhatsApp) |
| 29 | Intelligent Analytics | Optimized intermodule message linkage | Supports sending notification messages to designated personnel after alarm linkage trigger (SMS, WhatsApp, Email, Line). |
| 30 | Intrusion Alarm | Optimized intermodule message linkage | Supports sending messages to designated personnel after alarm linkage trigger (SMS, WhatsApp, Email, Line). |
| 31 | Visitor | Optimized intermodule message linkage | Supports sending notification messages to designated personnel after linkage trigger for visitor booking, booking timeout, registration, check in, check out, late check out, watchlist, etc. (via SMS, Email, WhatsApp). |
| 32 | User Permission Management | Optimized intermodule message linkage | Newly added permission management for video preview, PTZ control, snapshot, playback, partial expansion, and voice intercom. |
| 33 | User Permission Management | Optimized intermodule message linkage | Newly added permission management for video playback, video download, snapshot, partial expansion. |
| 34 | Smart Video Surveillance | Optimized intermodule message linkage | Fine-grained management of main NVR functions and IPC camera functions is added |
| 35 | Smart Video Surveillance | Optimized intermodule message linkage | All page permissions are fine-grained to the third-level subfunction management (such as the add, refresh, and edit buttons in a page) |
| 36 | Smart Video Surveillance | Optimized intermodule message linkage | Accompanied by menu page adjustment of ZK NVR main device to ensure consistency with ZK NVR configuration |
| 37 | Smart Video Surveillance | Optimized intermodule message linkage | Newly added support for connecting ZK 16/32-channel dualdisk standard NVR hardware |
| 38 | Smart Video Surveillance | Optimized intermodule message linkage | Newly added support for smart retrieval with human and vehicle characteristics filter; the target video can be quickly retrieved and marked in different colors via ZKNVR |
| 39 | Smart Video Surveillance | Optimized intermodule message linkage | Configurable linkage alarm to be displayed on the splicing wall Decode on the wall window; once triggered, can be automatically displayed on the splicing wall, realizing window roaming (with ZK decoder) |
| 40 | Intelligent Analytics | Optimized intermodule message linkage | Newly added support for BioSense series intelligent analysis function linkage with alarm and access control bidirectional linkage |
| 41 | Intelligent Analytics | Optimized intermodule message linkage | Newly added support for linkage alarm decoding and display on wall configuration, camera selection and wall display time can be selected |
| 42 | Statistics Analysis | Optimized intermodule message linkage | Newly added support for object detection alarm; intelligent motion detection alarm with human and vehicle characteristics; region detection intelligent alarm with human and vehicle characteristics; line crossing detection intelligent alarm with human and vehicle characteristics; target counting intelligent alarm with human and vehicle characteristics |
| 43 | Log | Optimized intermodule message linkage | Supports switch control of CU request, as well as client request logs |
| 44 | Add ONVIF Device | Optimized intermodule message linkage | Third-party NVR is supported to connect to the platform for basic video management via ONVIF protocol, which currently supports only preview |
| 45 | C/S Client | Optimized intermodule message linkage | The client supports preview, playback, electronic maps, alarms. |
Version 5.4.2
Release Date: 2023/06/01 | Update Type: Patch
Bug Fixed
- 1. While Adding NVR failed, the camera list has extra cameras info without cameras.
- 2. Fixed the issue of cannot adding the NVR with same IP (The WAN NVR has the same IP and different Port).
Version 5.4.1
Release Date: 2023/05/17 | Update Type: Patch
Bug Fixed
- 1. Fixed the bug when changed the area of device, the event point of logs will missing and the reader name became 'other'
- 2. Fixed the bugs that when system auto previewed the temporary employees, the biophoto path stored in database has a '/' extra, which will lead to the biophoto sync failed to device.
- 3. Fixed the bug that the commands of sync personnel lack of biophoto.
- 4. Fixed the bug that the back-end verification events of part controllers cannot stored at database.
Version 5.4.0
Release Date: 2023/04/28 | Update Type: Minor Updates
Features
| No. | Updated Module | Sub-menu | Key Updates |
|---|---|---|---|
| 1 | User Permission management | Video Preview | Added permission management for video preview, PTZ control, snapshot, recording, digital zoom, intercom. |
| 2 | User Permission management | Video Playback | Added permission management for video playback, video backup, snapshot, digital zoom. |
| 3 | User Permission management | Device Management | Added permission management for NVR and IPC management. |
| 4 | User Permission management | Other pages | Added permission management (such as new, fresh, edit icon) for all key features to manage more detailed. |
| 5 | Menu Adjustment | Behavior analysis configuration | Menu adjustment for keeping the consistency with ZK NVR configuration. |
| 5 | Menu Adjustment | Crowd situation configuration | Menu adjustment for keeping the consistency with ZK NVR configuration. |
| 6 | Smart Video Surveillance | Device Management | Added to support the connection for ZK 16/32CH NVR 2HDD models. |
| 7 | Smart Video Surveillance | Video Playback | Added to support ZK NVR for fast retrieval of target video by human & vehicle alarms, marked by different color in the play bar. |
| 8 | Smart Video Surveillance | Decode on the wall | Support configuration of alarm linkage to video wall window, the triggered alarm to automatically decode to video wall floating window to display (by ZK Decoder) |
| 9 | Intelligent Analytics | Global Linkage | Added to support BioSense Series intelligent analytics based on human & vehicle targets bidirectional interaction alarm linkage with access control devices. Added to support alarm linkage video on the wall configuration, available to select channels alarm on the wall and time. |
| 10 | Statistics Analysis | Alarm Report | Added Object Detection alarm, Smart motion Alarm (human & vehicle) alarm, Area Detection (human & vehicle) alarm, Line Crossing (human & vehicle) alarm, Target Counting (human & vehicle) alarm |
| 11 | Log | Parameter Configuration | Added to support CU Request control on/off, and log request from client side. |
Version 5.3.0
Release Date: 2023/03/10 | Update Type: Major Updates
Key Update
| No | Updated Module | Key Update |
|---|---|---|
| 1 | Elevator | New support for EC16 elevator control panel: EC16 is the latest controller developed by ZKTeco, supporting 16 floors, maximum support for 128 floors, PUSH protocol, supports for direct access to floors. |
| 2 | Parking | New support for ticket dispenser (TBM01/02) access and management. |
| 3 | Smart Video | Optimize Video Patrol function: support Video Patrol based on GIS map. |
| 4 | Intelligent Analytics | Support intelligent function configuration and alarm linkage of Biosense series NVR. |
| 5 | Intelligent Analytics | Support ZKIVA-Edge N3 access: realize personnel and vehicle detection. |
| 6 | Locker | Optimize the function of Locker module: optimize the visual panel display, add support for message linkage (SMS/Email, WhatsApp, Line). |
| 7 | Intrusion Alarm | 1. Accessed BOSCH / RISCO support alarm linkage access control, elevator control, entrance control, video, WhatsApp, Line, SMS. 2. Support access control linkage arming and disarming (access control global linkage). |
| 8 | License | New support for user self-help license reset function. |
Version 5.2.0
Release Date: 2022/12/6 | Update Type: Major Updates
Implemented Change
| Description |
|---|
| Intrusion Alarm Intrusion systems Apply to places requiring boundary control and real-time monitoring. For example, when an intruder enters the restricted area, it will trigger a corresponding alarm, ensuring the area's safety. Currently, ZKBio CVSecurity integrates with BOSCH and RISCO, the third-party alarm controllers, offering functions such as arming, disarming, alarm record query and displaying defense zones on the map. The corresponding models and devices are as follows: BOSCH: B Series: B6512, B5512, B4512, B3512; G Series: B9512G, B8512G. RISCO: LightSYS32; LightSY50. |
| Locker Management A New Module of ZKBio CVSecurity. This locker module manages an electronic locker system in a unified platform. As a result, administrator can manage multiple lockers simultaneously. Currently, the locker module supports the LockerPad-7B device, and offers the following functions: 1. Supports facial recognition and card verification. 2. Supports online and offline working modes. a. Online mode: With ZKBio CVSecurity's security platform, administrator can unify the locker users' allocation, advertising resources distribution, data recording and other functions of multiple devices. b. Offline working mode: To manage device parameters, data records, locker users' allocation and advertisement displaying through the LockerPad-7B. 3. Supports locker users' management and set different usage rules according to the type of users: a. Fixed users: e.g., permanent staff in factories and offices. b. Temporary users: e.g., supermarket customers, generally random allocation c. Fixed users + Temporary users: e.g., in some tourist areas, available for staff and tourists to use the locker at the same time. 4. Supports cabinet allocation for one user, one cabinet for multi-users, one user for multi-cabinets. 5. Supports digital advertisement placement with image and video (3GP, MP4, MKV, WEBM, PNG, JPG, JPEG, GIF) to increase commercial value and drive foot traffic. 6. Provides storage-pick-up records review. 7. Offers basic functions such as parameter setting, multi-language (Simplified Chinese & English) switching. |
| Device Replacement In the actual use process, there are often cases of equipment failure; re-adding equipment means that you need to reset the device parameters. ZKBio CVSecurity's latest function of replacing equipment, to achieve a one-click device replacement Application. When the same type of equipment fails to operate, you only need to enter the serial number of the new device to restore previous settings. |
| Fast Target Search When a suspicious person is found during real-time video viewing or playback, you can zoom in and take screenshots, and quickly track the suspicious person by using the quick "Target Search" button to achieve a person track search. |
| Respondent Self-Approval Optimize the visitor process, after the visitor invitation email is sent, ZKBio CVSecurity will send an audit email to the host. The host can complete the operation of "Review or Reject" by clicking on the audit link of the email, then quickly complete the review. |
| Import or Export Support import or export "access level". Batch import of "person information" and "access level" via Excel to quickly complete the access control configuration in the Access Level project. |
Version 5.1.1
Release Date: 2022/08/18 | Updates Type: Major Updates
New Features and Improvements
| Implemented Change | Description |
|---|---|
| Intelligent Video | 1. PTZ Control: Support cruising with pre-set time and positions 2. ZKNVR (Z8536NMR /Z8536NHR /Z8564NHR /Z85128NTR)-General intelligence Ability to set video linkage, support link to email, review recording, monitor and PTZ control. 3. Support video intercom. Support watermark function. 4. Protect the image from being copied and reused without permission and prevent information leakage. 5. Support Tiandy network video recorder (NVR) management. 6. Support a real-time push notification of abnormal type alarms on the ZKNVR and history record query. The abnormal type alarms will be triggered when the hard disk is full; the system has not connected to the hard disk; the hard disk network is disconnected; the hard disk has a SMART error; network failure and IP address conflict. 7. Support Global video linkage: 1) Linkage to capture a photo, linkage to record a video and linkage to a pop-up window. 2) Linkage to access control and linkage to ladder control. 3) Linkage to send an email or SMS. |
| Intelligent Scene | 1. Attendance checking and adding duty plan. The dashboard shows a general report of the current duty personnel. 2. Users can customize my dashboard. 3. Video Linkage supports a user-defined list library to alarm. 4. Support live alarm to real-time monitoring. All alarm from IPC or ZKIVA-Edge T1. 5. The system can identify and capture stranger's photo in surveillance area and add to list library. 6. Supports quick target search and personnel trajectory drawing with captured photos. 7. The camera added to ZKIVA-Edge supports fast binding NVR for storage Applications. |
| Access Control | 1. Added the Muster Point function to solve the problem of rapid roll call counting in emergency situations such as firefighting. 2. Add Personnel In/Out Board, mainly used at construction site, to show personnel entry and exit information. |
| Visitor | Support auto sign-in in the informal settings. Visitors do not need to register on-site and get pass quickly. |
| Parking System | 1. Support LPR-BEST Protocol devices. 2. Support Car ID. 3. Support the dual identification of drivers and vehicles and determine whether the driver and the license plate information match the system. The user deploys this function in a high security and protection environment. |
| System | 1. Support for switching databases through the console. 2. Linkage to WhatsApp. 3. Linkage to Line. |
Version 5.0.0
Release Date: 2022/04/23 | Updates Type: Major Updates
New Features and Improvements
| Implemented Change | Description |
|---|---|
| Intelligent Video | Compare ZKBioSecurity VMS: 1. "Crowd detection" includes crowd density detection, crowd movement detection and heat maps. 2. "Smart target search" supports searching targets by gender, age, hairstyle, mask, glasses, hat. 3. "Smart vehicle detection" supports vehicle search and detection by multicredential such as, plate number, vehicle type, vehicle brand, vehicle colour, etc. 4. Supports behaviour analysis such as line crossing detection, intrusion detection, object left detection, object remove detection, region entrance, region exiting, rapid movement, wandering detection, and alarm linkage for abnormal behaviour. 5. Supports intelligent reserve image search function. 6. Maximum supports 1024 video channels, license-free for the first 64 channels, support 16 channels real-time playback simultaneously. |
| Intelligent Scene | 1. Tailing detection: Facial recognition record can cross-check with access control record to validate any personnel enter without access control record. 2. Perimeter Protection Function: smart video analysis with line crossing detection to detect anyone crossing the perimeter with real-time snapshots or short videos for crossed line objects, an intelligent dashboard and detailed summary reports. 3. Personnel control function: Facial recognition function cross-check with allowed list, prohibited list and strangers to prompt notifications, alerts, real-time snapshot and summary reports and detailed summary reports. 4. Attendance Checking Function: Real-time checking personnel attendance in the delegated area, intelligent dashboard. 5. People counting: Dynamically count the number of people in the area, and alarm when the number of people reaches the set value. 6. "Advanced smart target search" in the intelligent scene module provide more compensative functions and supports the full-platform event search of multi- credential such as, person's name, ID number, reverse image search, gender, age, mask, glasses, jacket colour, and trousers colour, and generating detail person trajectory. |
| Attendance | The video capture records can be considered as an attendance log when users forget to check in/check out on attendance devices. |
| API | 1. Support Dynamic QR Code. 2. Support departure employee. 3. Support Access Level sync to the device. 4. Support attendance exception Application interface (leave, overtime, etc). 5. The parking module supports adding, deleting, and changing the license plate number of personnel. |
| Personnel | 1. New add List Library to manage pass or prohibit people. 2. Support person ID starts with 0, like 00001. |
ZKTeco | Biometrics and Computer Vision
