TC-Link® -200-OEM Wireless Analog Input Node
Cov neeg siv phau ntawv qhia
Tswv Yawm Saub QHIA TIAS
TC-Link-200-OEM yog ib qho me me, wireless, tus nqi qis, ib leeg-channel kub sensor node npaj rau OEM kev koom ua ke. Nta ib qho kev tawm tswv yim txhawb nqa Thermocouples, Thermometers Resistance, thiab Thermistors, TC-Link-200OEM enables high-resolution, low-noise data collection at sample tus nqi mus txog 128 Hz. Cov neeg siv tau yooj yim cov kev pab cuam nodes rau kev nruam thiab tshwm sim-triggered sampTxuas nrog SensorConnect.
Yuav kom tau txais cov ntaub ntawv sensor, TC-Link-200-OEM yog siv nrog tus Tswv Sensing WSDA rooj vag thiab los nrog cov kev xaiv hauv qab no.
| Configuration Option | Kav hlau txais xov Gain | |
| Integrated nti kav hlau txais xov | 1.5 dB ib | |
| U.FL interface: Stub kav hlau txais xov, 2 ″ cable | -0.9 dBi | |
| Terminal thaiv (yeem) | — | |
| Calibration Certificate | — |
Table 1 – TC-Link-200-OEM Configuration Options
Wireless Simplicity, Hardwired Reliability ™
| Qhov taw qhia | Cwj pwm | Node xwm txheej |
| Ntaus xwm txheej qhov taw qhia |
OFF | Node yog OFF |
| Ceev ntsuab flashing ntawm kev pib |
Node tab tom booting | |
| 1 (slow) ntsuab mem tes ib ob |
Node tsis ua haujlwm thiab tos rau ib qho lus txib |
|
| 1 ntsuab ntsais txhua 2 vib nas this |
Node yog sampling | |
| Blue LED thaum lub sijhawm sampling |
Node yog resynchronizing | |
| Liab LED | Built-in xeem yuam kev |
Table 2 – Indicator Behaviors
Pinout thiab Senor Wiring
| Cim | Kev piav qhia | Tus Pin Hom |
Ntau yam |
| SP+ | Sensor Excitation Fais fab rau sab nraud sensors. Lub hwj chim yuav yog lub luag hauj lwm cycled rau sensors tshwj tsis yog tias configured rau lub hwj chim tsis tu ncua. | Tso zis | 2.5 V, 100 mA |
| S+ | Kub sensor input + | Cov Lus Qhia Kev Koom Tes | 0 rau 2.5v |
| S- | Kub sensor input - | Cov Lus Qhia Kev Koom Tes | 0 rau 2.5v |
| GND | Sensor av | GND | |
| NC | Cia li qhib | ||
| NC | Cia li qhib | ||
| GND | Hwj chim hauv av | GND | |
| VIN | Input Power Supply | Lub zog nkag | 3.3 rau 30v |
TC-Link-200-OEM default wiring siv K-hom thermocouple.
Cov neeg siv kev teeb tsa yuav tsum muaj rau cov kev xaiv txuas hauv qab no.
Daim duab 3 – Kev xaiv thaiv txuas ntxiv
Cov Lus Pom Zoo Mounting
Muaj 4 qhov txuas ntawm TC-Link-200-OEM rau 2-56 UNC screws.
Cov node tuaj yeem ntsia tau rau hauv txhua qhov kev taw qhia, tab sis nws raug pom zoo tias nws yog mounted rau hauv txoj kev uas optimizes kev sib txuas lus wireless.
Node Kev Ua Haujlwm Hom
Sensor nodes muaj peb hom kev ua haujlwm: nquag, pw tsaug zog, thiab tsis ua haujlwm. Thaum lub node yog sampling, nws yog nyob rau hauv active hom. Thaum sampling nres, node hloov mus rau hauv idle hom, uas yog siv rau configuring node nqis thiab tso cai rau toggling ntawm sampling thiab pw hom. Cov node yuav cia li nkag mus rau hauv ultra-low-power pw tsaug zog hom tom qab tus neeg siv txiav txim siab lub sijhawm tsis ua haujlwm. Cov node yuav tsis mus rau hauv hom pw tsaug zog thaum sampling.
Nruab Software
Nruab lub SensorConnect software rau ntawm lub computer host ua ntej txuas ib qho khoom siv. Nkag mus rau qhov dawb software download ntawm tus Tswv Sensing webqhov chaw ntawm:
http://www.microstrain.com/software
Tsim kom muaj Gateway Communication
Cov tsav tsheb rau lub rooj vag USB muaj nyob rau hauv SensorConnect software installation. Nrog lub software ntsia, lub rooj vag USB yuav raug kuaj pom tau thaum twg lub rooj vag txuas rau.
- Lub hwj chim yog siv rau lub rooj vag los ntawm kev sib txuas USB. Xyuas kom tseeb tias lub rooj vag xwm txheej qhia tau teeb pom kev zoo, uas qhia tias lub rooj vag txuas nrog thiab qhib lub zog.
- Qhib lub SensorConnect™ software.
- Lub rooj vag yuav tsum tshwm nyob rau hauv Controller qhov rais cia li nrog rau kev sib txuas lus chaw nres nkoj. Yog tias lub rooj vag tsis tau pom, txheeb xyuas qhov chaw nres nkoj ua haujlwm ntawm lub tshuab computer, thiab tom qab ntawd tshem tawm thiab rov ntxig rau USB connector.
Txuas rau Nodes
Muaj ntau txoj hauv kev tuaj yeem siv hauv SensorConnect los tsim kev sib txuas lus nrog cov nodes: qhov tsis siv neeg nrhiav pom ntawm tib zaus, tsis siv neeg nrhiav pom ntawm qhov sib txawv, thiab ntxiv nodes manually.
A. Tsis Siv Neeg Node Discovery ntawm tib zaus
Yog tias lub hauv paus thiab node nyob rau tib qhov kev khiav hauj lwm zaus, cov node yuav populate hauv qab ntawm Base Station npe thaum lub hwj chim ntawm TC-Link-200OEM.
B. Tsis siv neeg Node Discovery ntawm ntau zaus
Yog tias lub voj voog liab uas muaj tus lej tshwm nyob ib sab ntawm Lub Chaw Nres Tsheb, lub pob yuav ua haujlwm ntawm ib qho xov tooj cua cais. Xaiv qhov chaw nres tsheb hauv paus thiab tom qab ntawd xaiv Cov Nodes ntawm Lwm Cov Pobzeb Zaus.
Qhia qhov tshiab node ntxiv thiab xaiv Tsiv Node mus rau zaus (#).
C. Manually Ntxiv Node
Ntxiv lub node manually yuav tsum tau nkag mus rau qhov chaw nyob ntawm node thiab nws qhov kev teeb tsa zaus tam sim no.
Yog tias qhov node tau ua tiav tiav, ob qhov kev lees paub yuav tshwm sim thiab nws yuav raug teev nyob rau hauv Base Station.
Yog hais tias lub node ua tsis tau tejyam ntxiv, cov lus tsis ua hauj lwm yuav tshwm sim. Qhov no txhais tau hais tias lub node tsis teb rau lub hauv paus chaw nres tsheb uas yuav qhia tau hais tias lub node tsis nyob rau hauv idle hom los yog nws yuav nyob rau lwm zaus. Yog tias "Ntxiv Node Anyway" raug xaiv, nws yuav koom nrog cov node nrog cov channel nkag tab sis nws yuav muaj kev sib txuas lus yuam kev. Yog tias qhov node tsis nyob twj ywm, txav lub hauv paus chaw nres tsheb mus rau qhov zaus ntawm lub node thiab muab "Teeb rau Idle" hais kom ua.
Configure Node
Node nqis tau khaws cia rau hauv lub cim xeeb uas tsis muaj qhov tsis zoo thiab yuav raug teeb tsa siv SensorConnect. Txhawm rau nkag mus rau ntawm node configuration ntawv qhia zaub mov, nyob rau hauv Devices xaiv cov node thiab tom qab ntawd Configure pobzeb.
Cov ntawv qhia kev teeb tsa qhia cov channel thiab cov kev xaiv kev teeb tsa muaj rau hom ntawm node siv.
Qhov no example siv K-hom thermocouple.
- Los ntawm Wireless Node Configuration Menu> Transducer Hom, xaiv
Thermocouple> Sensor Hom, xaiv K hom.
- Nyob rau hauv Low Pass Lim, xaiv 12.66 Hz
- Xaiv Siv Configuration los sau rau node nco.
Configure SampKev teeb tsa thiab pib cov ntaub ntawv tau txais
- Sab laug-nias ntawm qhov chaw nres tsheb hauv paus> Sampling, thiab qhia cov nodes ua sampcoj los ntawm khij lub thawv rau sab laug ntawm txhua lub node.
- Hauv qab Sampling, xaiv Sample Rate los ntawm cov ntawv qhia zaub mov nco, thiab xaiv Nruam mus rau sample indefinitely.
- Xaiv Thov thiab Pib Network.
- Xaiv Tsim Ceev View Dashboard nyob rau hauv lub qhov rais pop-up tam sim ntawd los tsim ib lub dashboard ntawm cov ntaub ntawv tshiab.
Cov Lus Qhia Xov Tooj Cua
TC- Link- 200- OEM ntiav 2.4GHz IEEE 802.15.4- raws li xov tooj cua transceiver rau kev sib txuas lus wireless. Lub xov tooj cua yog lub xov tooj cua sib txuas ncaj qha thiab tuaj yeem teeb tsa ua haujlwm ntawm 16 qhov sib txawv ntawm 2.405 GHz txog 2.480 GHz. Ua raws li tus qauv 802.15.4, cov zaus no yog aliased raws li cov channel 11 txog 26. Rau txhua qhov tshiab tsim cov nodes, lub neej ntawd teeb tsa yog 2.425 GHz (channel 15).
TC-Txuas-200-OEM
FCC ID: XJQMSLINK0011
IC ID: 8505A-MSLINK00 11
Cov cuab yeej no ua raws li Tshooj 15 ntawm Tebchaws Meskas FCC Cov Cai, thiab Kev Lag Luam Canada daim ntawv tso cai-tsim RSS. Kev ua haujlwm yog ua raws li ob yam hauv qab no:
- Cov cuab yeej no yuav tsis cuam tshuam, thiab
- Cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam, suav nrog kev cuam tshuam uas yuav ua rau lub tshuab ua haujlwm tsis xav tau. Kev hloov lossis hloov kho, suav nrog cov kav hlau txais xov, cov kev hloov pauv tsis pom zoo los ntawm tus Tswv Corporation tuaj yeem ua rau tus neeg siv txoj cai ua haujlwm ntawm cov khoom siv.
ESD Sensitivity
TC-Link-200-OEM yog npaj los muab kev koom ua ke rau hauv daim ntawv thov-tsim vaj tse los tiv thaiv nws los ntawm ib puag ncig cov ntsiab lus, cuam tshuam, thiab electrostatic paug (ESD), uas tuaj yeem cuam tshuam kev lag luam lossis kev puas tsuaj PCB.
TC-Txuas-200-OEM muaj qhov cuam tshuam rau kev puas tsuaj thiab / lossis cuam tshuam ntawm kev ua haujlwm ib txwm los ntawm Electrostatic Discharge (ESD). ESD tej zaum yuav ua rau lub cuab yeej rov pib dua, uas yuav xav tau kev cuam tshuam cov neeg siv kom tau txais cov ntaub ntawv txuas ntxiv.
LORD Corporation
MicroStrain Sensing Systems
459 Hurricane Txoj Kev, Suite 102
Williston, VT 05495 USA®
ph: ua. 802-862-6629 Ib
sensing_sales@LORD.com
sensing_support@LORD.com
Copyright © 2018 LORD Corporation
Cov ntaub ntawv 8501-0096 Revision A. Kev hloov pauv yam tsis tau ceeb toom.
Cov ntaub ntawv / Cov ntaub ntawv
 |
Logicbus TC-LINK-200-OEM Wireless Analog Input Node [ua pdf] Cov neeg siv phau ntawv qhia TC-LINK-200-OEM Wireless Analog Input Node, TC-LINK-200-OEM, Wireless Analog Input Node, Input Node |
