Logicbus PR2000 Siab Cov Ntaub Ntawv Logger nrog LCD Tus Neeg Siv Qhia

Xaim cov ntaub ntawv logger nrog cov kev sojntsuam xav tau.
Txuas cov ntaub ntawv logger rau Windows PC nrog IFC200 (muag nyias).
Tua tawm MadgeTech 4 Software. Lub pHTemp2000 yuav tshwm sim hauv Cov Khoom Siv Txuas Txuas Qhov rai qhia tias lub cuab yeej tau lees paub.

Xaiv txoj kev pib, nyeem tus nqi thiab lwm yam tsis tsim nyog rau daim ntawv thov xav tau cov ntaub ntawv nkag. Thaum configured, nyem lub Start icon thiab xa cov ntaub ntawv logger
Txhawm rau rub tawm cov ntaub ntawv, txuas cov ntaub ntawv logger rau lub Windows PC nrog IFC200, xaiv cov cuab yeej hauv daim ntawv teev npe, nyem lub cim Nres, thiab tom qab ntawd nyem lub cim Download. Ib daim duab yuav cia li tso saib cov ntaub ntawv.

Thov xa mus rau PR2000 Product Manual kom paub meej cov khoom tag nrho los ntawm kev mus rau madgetech.com/product-documentation

Khoom Tshajview

Lub PR2000 yog lub siab cov ntaub ntawv logger nrog LCD zaub. Cov cuab yeej muaj qhov ntsuas IP ntawm 65, uas txhais tau hais tias nws yog plua plav pov thawj, thiab cov ntaub ntawv pov thawj ua rau nws tuaj yeem siv sab nraum zoov. Qhov yooj yim LCD muab kev nkag mus rau kev nyeem ntawv siab tam sim no, nrog rau qhov tsawg kawg nkaus, qhov siab tshaj plaws thiab nruab nrab cov txheeb cais. Ib daim duab trending kuj tshwm sim ntawm 100 qhov kev nyeem ntawv kawg.
Thov xa mus rau PR2000 Product Manual kom paub meej cov khoom lag luam tag nrho los ntawm kev mus rau madgetech.com/product-documentation.

Zaub Tshajview

Qhov taw qhia xwm txheej

Kev teeb tsa software

Txhim kho MadgeTech 4 Software
Lub MadgeTech 4 Software ua rau cov txheej txheem rub tawm thiab rovviewing cov ntaub ntawv ceev thiab yooj yim, thiab yog dawb mus download tau los ntawm lub MadgeTech webqhov chaw.

Rub tawm MadgeTech 4 Software ntawm Windows PC los ntawm kev mus rau: madgetech.com/software-download.

Nrhiav thiab unzip cov downloaded file (feem ntau koj tuaj yeem ua qhov no los ntawm txoj cai nyem rau ntawm qhov file thiab xaiv Extract).
Qhib MTInstaller.exe file.
Koj yuav raug ceeb toom kom xaiv ib hom lus, tom qab ntawd ua raws li cov lus qhia hauv MadgeTech 4 Setup Wizard kom tiav MadgeTech 4 Software installation.

Kev ua haujlwm ntaus ntawv

Txuas thiab pib cov ntaub ntawv logger

Thaum lub software raug ntsia thiab khiav, ntsaws lub interface cable rau hauv cov ntaub ntawv logger.
Txuas USB kawg ntawm lub interface cable rau hauv ib qho qhib USB chaw nres nkoj ntawm lub computer.

Cov cuab yeej yuav tshwm sim nyob rau hauv Cov Khoom Siv Txuas Txuas, taw qhia cov ntaub ntawv xav tau logger.
Rau feem ntau daim ntawv thov, xaiv "Custom Start" los ntawm cov ntawv qhia zaub mov bar thiab xaiv qhov xav tau pib txoj kev, nyeem tus nqi thiab lwm yam tsis haum rau cov ntaub ntawv sau npe thov thiab nyem "Start". ("Quick Start" siv cov kev xaiv pib tshiab tshaj plaws, "Batch Start" yog siv rau kev tswj ntau tus loggers ib zaug, "Real Time Start" khaws cov ntaub ntawv raws li nws sau thaum txuas nrog tus logger.)

Cov xwm txheej ntawm lub cuab yeej yuav hloov mus rau "Khiav" lossis "Tos Pib" nyob ntawm koj txoj kev pib.
Tshem tawm cov ntaub ntawv logger ntawm lub interface cable thiab muab tso rau hauv ib puag ncig los ntsuas.

Nco tseg: Lub cuab yeej yuav tsum tsis txhob kaw cov ntaub ntawv thaum kawg ntawm lub cim xeeb mus txog lossis lub cuab yeej nres. Lub sijhawm no lub cuab yeej tsis tuaj yeem rov pib dua kom txog thaum nws tau rov ua tub rog los ntawm lub computer.

Download tau cov ntaub ntawv los ntawm cov ntaub ntawv logger

Txuas tus logger rau lub interface cable.
Taw qhia cov ntaub ntawv logger hauv daim ntawv teev cov khoom siv txuas. Nyem "Stop" ntawm cov ntawv qhia zaub mov.

Thaum cov ntaub ntawv logger nres, nrog tus logger tseem ceeb, nyem "Download". Koj yuav raug ceeb toom kom sau npe koj daim ntawv tshaj tawm.
Downloading yuav offload thiab txuag tag nrho cov ntaub ntawv kaw rau lub PC

Computer Interface

Muab tag nrho cov txiv neej connector ntawm IFC200 interface cable rau hauv tus poj niam receptacle ntawm cov ntaub ntawv logger. Ntxig tus poj niam USB connector rau hauv USB. (Thov saib cov ntaub ntawv Logger Software phau ntawv qhia ntxiv.)
* CEEB TOOM: Nruab tus tsav tsheb ua ntej txuas lub cuab yeej siv USB thawj zaug. Saib phau ntawv Software rau cov lus qhia ntxiv.

Pem hauv ntej vaj huam sib luagview

Hloov cov zaub units
PR2000 los nrog lub Hoobkas default zaub units ntawm PSI rau siab thiab lub sij hawm lub sij hawm siab graphing feature. Cov chav no tuaj yeem hloov pauv tau yooj yim los ntawm nias lub pob F3 hauv lub vijtsam tseem ceeb thiab tom qab ntawd xaiv F1 rau siab lossis F2 rau daim duab siab. Tom qab xaiv cov channel, cov chav nyob uas muaj tuaj yeem raug scrolled los ntawm ob qho tib si nias lub channel txoj haujlwm tseem ceeb dua lossis siv UP thiab DOWN cov yuam sij.
Khawm nias saw: Main Screen -> F3 -> F1 (siab) lossis F2 (siab graph) -> ua haujlwm tseem ceeb dua lossis nce thiab nqis

Tshawb xyuas cov xwm txheej nco
Ib lub cim xwm txheej tshwm sim ntawm txhua lub vijtsam uas sawv cev rau lub cim xeeb, tab sis cov ntaub ntawv ntxiv suav nrog-ing feem pua nco sab laug thiab tus naj npawb ntawm kev nyeem ntawv tuaj yeem ua tau. viewed. Los ntawm Main Screen nias tus yuam sij F1 kom nkag mus rau cov xwm txheej cov ntxaij vab tshaus ces nias F2 rau view nco txog xwm txheej.
Khawm nias saw: Main Screen -> F1 -> F2

Txheeb xyuas qhov xwm txheej fais fab
Cov xwm txheej roj teeb thiab lub zog sab nraud (yog tias muaj) icon tshwm sim ntawm txhua lub vijtsam, tab sis feem pua ntawm cov roj teeb uas tseem tshuav thiab lub zog sab nraud muaj xws li hom roj teeb, roj teeb tam sim no vol.tage, thiab tam sim no sab nraud voltage kuj viewed. Los ntawm Main Screen nias F4 rau view Cov Khoom Siv Configuration Menu, F2 kom nkag mus rau cov kev xaiv fais fab, ces F4 ob zaug rau view lub Power Status screen, suav nrog cov roj teeb fais fab feem pua tseem tshuav thiab muaj lub zog sab nraud. Roj teeb hom thiab roj teeb voltage kuj tso tawm kom pom, nrog rau sab nraud fais fab voltage (yog tias txuas).
Khawm nias saw: Main Screen -> F4 -> F2 -> F4 -> F4

Hloov qhov sib piv
PR2000's LCD npo qhov sib piv qhov tseem ceeb tuaj yeem hloov tau ob txoj hauv kev. Ib txoj hauv kev tau piav qhia hauv Phau Ntawv Qhia Txog Kev Ua Haujlwm. Txoj kev sai dua, yooj yim dua yog ib txhij nias lub CANCEL thiab UP lossis Down khawm hauv ib qho screen.
Khawm nias saw: CANCEL + UP (kom nce) lossis DOWN (kom txo qis)

Cov Piav Qhia

Device Configuration Menu
Qhia cov kev xaiv muaj nyob rau hauv lub tshuab ntaus ntawv teeb tsa

F1 = DISPLAY: nkag mus rau Kev Kho Kom Pom Kev Pom Zoo
F2 = POWER: nkag mus rau Power Modes screen
F3 = INFO: mus rau Device Information screens
F4 = EXIT: rov qab mus rau lub vijtsam loj
CANCEL = rov qab mus rau lub vijtsam loj
OK = rov qab mus rau lub ntsiab screen
UP = tsis muaj haujlwm
Down = tsis muaj haujlwm

Device Reset
Cov cuab yeej no suav nrog ob qho kev xaiv rov pib dua, Kho vajtse thiab lub zog cuam tshuam

Fais fab cuam tshuam: Tso tawm raws li kev ceeb toom thaum lub zog cuam tshuam thaum lub tshuab ua haujlwm.

F1 = OK: lees txais kev ceeb toom thiab tso saib lub vijtsam loj
F2 = tsis muaj nuj nqi F3 = tsis muaj nuj nqi F4 = tsis muaj nuj nqi
CANCEL = tsis muaj haujlwm
OK = lees txais kev ceeb toom thiab tso saib lub vijtsam loj
UP = tsis muaj haujlwm
DOWN = tsis muaj haujlwm
Hardware Reset: Tso tawm raws li kev ceeb toom thaum muaj teeb meem kho vajtse tau tshwm sim.

F1 = OK: lees txais kev ceeb toom thiab tso saib lub vijtsam loj
F2 = tsis muaj nuj nqi F3 = tsis muaj nuj nqi F4 = tsis muaj nuj nqi
CANCEL = tsis muaj haujlwm
OK = lees txais kev ceeb toom thiab tso saib lub vijtsam loj
UP = tsis muaj haujlwm
DOWN = tsis muaj haujlwm

Cov cuab yeej tu

Hloov roj teeb
Cov khoom no tsis muaj cov neeg siv khoom siv tau tshwj tsis yog lub roj teeb uas yuav tsum tau hloov ib ntus. Lub roj teeb lub neej cuam tshuam los ntawm cov roj teeb hom, ambient kub, sample tus nqi, sensor xaiv, off-loads thiab LCD siv. Cov cuab yeej muaj lub roj teeb indi-cator ntawm lub LCD. Yog tias lub roj teeb qhia tau qis, lossis yog tias lub cuab yeej zoo li ua haujlwm tsis tau, nws raug nquahu kom hloov lub roj teeb.
Khoom siv: 3/32 "HEX Tsav Tsheb (Allen Key) thiab Hloov Roj Teeb (6AA)

Tshem lub hau rov qab ntawm lub cuab yeej los ntawm unscrewing plaub screws.
Tshem lub roj teeb los ntawm nws lub compartment thiab unsnap nws ntawm lub connector.
Snap lub roj teeb tshiab rau hauv cov terminals thiab xyuas kom meej tias nws muaj kev ruaj ntseg.
Hloov lub hau kev saib xyuas kom tsis txhob kov cov xov hlau. Ntsia lub thawv rov qab ua ke.

Nco tseg: Nco ntsoov tsis txhob nruj cov screws lossis strip cov xov.
Rau lwm yam teeb meem kev saib xyuas lossis kev ntsuas ntsuas, peb xav kom lub tsev yuav raug xa rov qab mus rau lub Hoobkas rau kev pabcuam. Ua ntej xa rov qab lub cuab yeej, koj yuav tsum tau txais RMA los ntawm lub Hoobkas.

Recalibration
PR2000 tus qauv calibration yog nyob ntawm qhov ntau.

Ntxiv:

Kev cai calibration thiab pov thawj point xaiv muaj, thov hu rau tus nqi.
Hu rau cov kev cai calibration xaiv kom haum raws li cov kev xav tau tshwj xeeb.
Nqe thiab specifications yuav hloov. Saib MadgeTech cov lus thiab cov xwm txheej ntawm madgetech.com
Txhawm rau xa cov khoom siv rau MadgeTech rau kev ntsuas, kev pabcuam lossis kho, thov siv cov txheej txheem MadgeTech RMA los ntawm kev mus saib madgetech.com, tom qab ntawd hauv qab cov kev pabcuam, xaiv RMA Txheej Txheem.

General Specifications

Tshooj Naj Npawb	TIAB SA 2000
Siab Sensor	Semiconductor
Siab Ntau	* Saib Table kom paub meej
Kev daws teeb meem siab
Siab raug
Nco	262,143
Kev nyeem ntawv	1 nyeem txhua 2 vib nas this mus txog 1 nyeem txhua 24 teev
Yuav tsum tau Interface pob	IFC 200
Baud Rate	115,200
Hom roj teeb	6 alkaline AA roj teeb, neeg siv hloov tau
Hom roj teeb lub neej	1 xyoo roj teeb lub neej ntawm 1 feeb nyeem ntawv tus nqi nrog tso tawm, 30 hnub raug nrog kev siv cov khoom siv tas li.
Kev ua haujlwm ib puag ncig	-20 ° C rau + 60 ° C (-4 ° F txog + 140 ° F), 0% RH txog 95% RH (tsis-condensing)
Khoom siv	Dub anodized aluminium thiab 303 stainless hlau NPT txheej txheem kev sib txuas
Qhov ntev	5.1 nyob rau hauv x 4.8 nyob rau hauv x 1.705 (130 hli x 122 hli x 43.3 hli)
Kev pom zoo	CE

BATTERY WARNING: ROV QAB RAU LUB SIJ HAWM. TSIS TXHOB NYIAJ NYIAJ, NYIAJ NYIAJ, QHOV CHAW UA HAUJ LWM lossis pov tseg hauv hluav taws.

* PR2000 Siab Ntau, Kev daws teeb meem thiab raug

Ntau yam (PSI)	0-30	0-100	0-300	0-500	0-1000	0-5000
Qhov tseeb (PSI	2% FSR, 0.25% @ 25 ° C raug
Kev daws teeb meem	0.002	0.005	0.02	0.05	0.05	0.2

Cov ntaub ntawv / Cov ntaub ntawv

Logicbus PR2000 Siab Cov Ntaub Ntawv Logger nrog LCD [ua pdf] Cov neeg siv phau ntawv qhia
PR2000, Siab Cov Ntaub Ntawv Logger nrog LCD

Cov ntaub ntawv

Cov neeg siv phau ntawv

Logicbus PR2000 Siab Cov Ntaub Ntawv Logger nrog LCD

Cov kauj ruam pib nrawm