DS-KV61X3-(W)PE1(C)
Video Intercom Villa Qhov Rooj Tsheb
UD28151B-D
Daim duab References
1 Kev tshwm sim
- Microphone
- Lub koob yees duab
- Qhov taw qhia
- Khawm
- Daim npav nyeem cheeb tsam
- Lub suab nrov
- Terminals
- Debugging Chaw nres nkoj
- TAMPER
- Teem Ntsia Hlau
- TF Daim npav qhov
- Kev Sib Tham Network
Nco tseg: Qhov chaw nres nkoj debugging yog siv rau kev debugging nkaus xwb.
Qhov taw qhia Description
Xauv: Ntsuab
Hu: Txiv kab ntxwv
Sib Tham: Dawb
2. Terminal thiab Hlau
NC: Qhov Rooj Xauv Relay Tso Tawm (NC)
TSIS MUAJ: Qhov Rooj Xauv Relay Output (NO)
COM: Common Interface
AIN1: Rau kev nkag mus ntawm Qhov Rooj Hu
AIN3: Rau kev nkag mus rau khawm Tawm
AIN2 & AIN4: tshwj tseg
485-: RS-485 Interface (tshwj tseg)
485+: RS-485 Interface (tshwj tseg)
12 VDC IN: Lub Hwj Huam Muab Tswv Yim
GND: Hauv av
3. Txhim kho Accessory
- Mounting Template
- Mounting Phaj
Nco tseg: Qhov loj ntawm lub phaj mounting yog 102.58 hli × 39.24 hli × 6.2 hli.
4. Kev teeb tsa
Nco tseg: Video Intercom villa qhov rooj chaw nres tsheb txhawb nqa nto.
Ua ntej Koj Pib
Nco ntsoov tias txhua qhov sib thooj muaj feem siv fais fab tuag thaum lub sijhawm teeb tsa.
Cov cuab yeej uas koj xav tau los npaj rau kev teeb tsa: Laum (ø2.846) thiab gradient.
Muas cov ntaub thaiv npog ua ntej teeb tsa.
Nto Mounting tsis muaj Shield Shield
- Muab lub mounting template rau ntawm phab ntsa. Laum lub qhov ntsia hlau raws li tus qauv mounting. Tshem cov qauv ntawm phab ntsa.
- Ruaj ntseg lub phaj rau ntawm phab ntsa nrog 4 lub hau ntswj raws li lub qhov ntsia hlau.
- Nruab qhov chaw nres tsheb villa rau lub phaj mounting. Kho cov cuab yeej ntawm lub phaj mounting nrog lub teeb ntsia hlau.
Nco tseg: Siv silicone sealant ntawm cov kab hluav taws xob hauv cheeb tsam kom tsis txhob muaj nag los nkag. Thov xa mus rau daim duab A.
Nto Mounting nrog Shield Tiv Thaiv
- Muab lub mounting template rau ntawm phab ntsa. Laum lub qhov ntsia hlau raws li tus qauv mounting. Tshem cov qauv ntawm phab ntsa.
- Teem kab thaiv tiv thaiv nrog cov qauv teeb tsa.
- Ruaj ntseg lub phaj mounting thiab tiv thaiv daim thaiv ntawm phab ntsa nrog 4 muab ntsia hlau raws li cov ntsia hlau qhov.
- Nruab qhov chaw nres tsheb villa rau lub phaj mounting. Kho cov cuab yeej ntawm lub phaj mounting nrog lub teeb ntsia hlau.
Nco tseg: Yog tias txhim kho sab nraum zoov, koj raug qhia kom nruab lub cuab yeej nrog cov ntaub thaiv npog. Rau qhov tiav view, thov saib daim duab B.
5. Configuration ntawm Web
1 Qhib ntaus ntawv ntawm Web
Koj yuav tsum qhib lub cuab yeej ua ntej los ntawm kev teeb tsa tus password muaj zog ua ntej koj tuaj yeem siv lub cuab yeej.
- Lub hauv paus tsis ntawm lub qhov rooj chaw nres tsheb yog raws li hauv qab no:
- Default IP Chaw Nyob: 192.0.0.65.
- Default Port No.: 8000.
Default User Name: admin
- Fais fab ntawm lub cuab yeej, thiab txuas lub cuab yeej rau lub network.
- Sau tus IP chaw nyob rau hauv qhov chaw nyob bar ntawm web browser, thiab nyem Enter kom nkag mus rau nplooj ntawv qhib.
Nco tseg: Lub khoos phis tawj thiab lub cuab yeej yuav tsum nyob rau tib lub subnet. - Tsim thiab sau tus password rau hauv daim teb lo lus zais.
- Paub meej tias tus password.
- Nyem OK kom qhib lub cuab yeej.
Nco tseg: Thaum lub cuab yeej tsis qhib, cov haujlwm yooj yim thiab kev teeb tsa chaw taws teeb tsis tuaj yeem ua.
2. Kev nkag mus rau lub cuab yeej los ntawm Web Browsers
- Hauv qhov browser chaw nyob bar, nkag mus rau tus IP chaw nyob ntawm lub cuab yeej, thiab nias Enter kom nkag mus rau nplooj ntawv nkag mus.
- Sau tus neeg siv lub npe thiab tus password thiab nyem nkag mus.
3. Sib txuas lus nrog chaw nres tsheb sab hauv
- Nyem Chaw -> Intercom -> Nias Khawm Hu rau nkag mus rau nplooj ntawv teeb tsa.
- Teeb qhov tsis.
Kho kom raug hu No. rau txhua lub pob.
- Tshawb xyuas Call Management Center los teeb tsa lub pob hu xov tooj.
Nco tseg: Yog tias koj tshawb xyuas Call Management Center thiab teeb tsa tus lej hu ib yam nkaus, hu rau chaw tswj hwm muaj cai ntau dua li hu rau No. - Nias khawm hu rau chaw nres tsheb sab hauv.
4. Daim Npav
- Nyem Settings -> Access Control thiab Elevator Control nkag mus rau nplooj ntawv teeb tsa.
- Nyem Qhov Daim Npav. Muab daim npav tso rau ntawm thaj chaw nyeem daim npav.
- Thaum muab tiav lawm, lub qhov rais pop tuaj rau ntawm nplooj ntawv teeb tsa.
Nco tseg:
Tsuas yog daim npav M1 txaus siab, thiab daim npav Mi fare nrog cov duab tsis zoo yog pom zoo.
Txog li 10000 daim npav tuaj yeem muab thiab tswj los ntawm V series qhov rooj chaw nres tsheb. Lub suab ceeb toom (Tsis muaj daim npav ntxiv tuaj yeem muab tau.) tuaj yeem hnov txog thaum tus nqi daim npav tshaj tawm tshaj qhov txwv.
5 Xauv Qhov Rooj
Tom qab muab daim npav, koj tuaj yeem qhib lub qhov rooj los ntawm kev nthuav tawm cov ntawv tshaj tawm.
Xa mus rau Video Intercom Villa Qhov Rooj Chaw Nres Tsheb Tus Neeg Siv Phau Ntawv (scan QR code) kom paub meej.
http://enpinfodata.hikvision.com/analysisQR/showQR/cdf931cd
Tshooj 2 Terminal thiab Wiring Description
2.1 Terminal piav qhia
Nco tseg
RS-485 davhlau ya nyob twg tsis txaus siab.
2.2 Qhia Qhov Cuab Yeej
2.2.1 Lub Qhov Rooj Xauv Hluav Taws Xob
Nco tseg
Terminal NC / COM tau teeb tsa raws li lub neej ntawd rau kev nkag mus rau qhov sib nqus xauv / hluav taws xob ntsia liaj qhov rooj; Lub davhlau ya nyob twg NO / COM tau teeb tsa raws li kev nkag mus rau hluav taws xob tawm tsam.
2.2.2 Qhov Rooj Hu Xov Tooj
2.2.3 Tawm Cov Tsho Hluav Taws Xob
DS-KH9510-WTE1(B)
Video Intercom Network Chaw Nyob Hauv Tsev
KH9 series IP chaw nres tsheb sab hauv tsev, nrog 10-nti kov npo thiab Android system, coj koj cov yeeb yaj kiab thiab suab sib txuas lus zoo. Koj tuaj yeem nruab daim ntawv thov thib peb hauv lub cuab yeej raws li koj xav tau tiag tiag. Hikvision's Hik-Connect app kuj tseem tau teeb tsa ua ntej hauv lub cuab yeej, uas yuav pab koj tswj hwm Hikvision cov cuab yeej ua ke, yam tsis muaj kev hloov pauv.
- 10.1-nti muaj yeeb yuj kov npo nrog 1024 x 600 daws teeb meem
- Built-in Android System
- Txhawb Android APP installation
- Kev them nyiaj yug rau peb tog software kev koom ua ke
- Built-in Hik-Connect APP
- Rau tag nrho-hauv-ib txoj kev tswj hwm ntawm Hikvision cov khoom siv ntawm cov ntsiav tshuaj
Specification
| System parameters | |
| Kev ua haujlwm system | Hauv 10.1 |
| ROM | 8 GB ua |
| RAM | 2 GB ua |
| Processor | Embedder kev ua haujlwm siab processor |
| Zaub tsis tau | |
| Screen loj | 10.1 nti |
| Txoj kev ua haujlwm | Capacitive kov npo |
| Hom | Muaj yeeb yuj IPS |
| Kev daws teeb meem | 1024 × 600 |
| Video tsis | |
| Lens | / |
| Kev daws teeb meem | / |
| FOV | / |
| Wide dynamic range (WDR) | / |
| Video txheem txheem | H.265; H.264 |
| Focal ntev | / |
| Audio parameters | |
| Suab input | 1 built-in omnidirectional microphone |
| Suab compression standard | G722.1, OPUS, AAC_LC, AAC_LD, G726, G711.U, G711.A |
| Suab tso zis | 1 built-in suab nrov |
| Suab compression bitrate | 64 Kbps ib |
| Suab zoo | Ncua suab nrov thiab echo tshem tawm |
| Kev hloov pauv ntim | Kho tau |
| Muaj peev xwm | |
| Xov xwm muaj peev xwm | 200 cov duab ntes, 200 cov ntaub ntawv ceeb toom |
| Daim ntawv muaj peev xwm | 200 |
| Txuas sab hauv tsev txuas ntxiv
muaj peev xwm |
16 |
| Txuas network lub koob yees duab muaj peev xwm | 16 |
| Txuas qhov rooj xov tooj muaj peev xwm | 17 |
| Network tsis muaj | |
| Network raws tu qauv | TCP/IP, SIP, RTSP |
| Wi-nkaus | 2.4 GHz, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Bluetooth | / |
| 3G / 4G | / |
| Zigbee | / |
| Cov khoom siv interfaces | |
| tswb input | 8 |
| Network interface | 1 RJ-45 10/100 Mbps tus kheej hloov kho |
| TAMPER | / |
| RS-485 | 1 RS-485 (ib nrab duplex) |
| TF daim card | Txhawb TF daim npav, mus txog 128 G |
| Tswb tso zis | 1 |
| Xauv tswj | 1 relay, Max. 30 VDC 0.3 A, thiab 1 theem siab / qis relay (3.3 V / 0V) |
| General | |
| Khawm | / |
| Kev teeb tsa | Nto mounting |
| Qhov taw qhia | / |
| Qhov hnyav | Net nyhav: 875 g Qhov hnyav tag nrho: 1060 g |
| Kev tiv thaiv qib | / |
| Ua haujlwm kub | -10 ° C txog 50 ° C (14 ° F txog 122 ° F) |
| Ua haujlwm av noo | 10% mus rau 90% (tsis muaj condensing) |
| Qhov Loj (W × H × D) | 254 hli × 166 mm × 26.65 hli (10.0 × × 6.54 ″ × 1.05 ″) |
| Roj teeb | / |
| Fais fab mov | 12 VDC, 1 A, IEEE802.3af, txheem PoE |
| Kev thov ib puag ncig | Sab hauv |
| Kev siv fais fab | ≤ 12 W |
| Lus | Lus Askiv, Arabic, Fabkis, Lavxias, Mev, Mev (Latin America), Italian, German, Polish, Turkish, Portuguese, Portuguese (Brazil), Czech, Hungarian, Dutch, Romanian, Bulgarian, Ukrainian, Croatian, Serbian, Greek, Lithuanian, Estonian, Latvian, Norwegian, Danish, Slovenish, Slovenish, Mongolian, Nyab Laj, Suav suav |
Lub cev interface
| Tsis muaj. | Kev piav qhia | Tsis muaj. | Kev piav qhia |
| 1 | Screen | 7 | Debugging Chaw nres nkoj |
| 2 | Microphone | 8 | micro USB interface |
| 3 | Xauv khawm | 9 | Lub suab nrov |
| 4 | Fais fab mov Interface | 10 | Khaws tseg |
| 5 | Tswb Terminals | 11 | TAMPER |
| 6 | RS-485 / Relay Interface | 12 | Kev Sib Tham Network |
Muaj Qauv
DS-KH9510-WTE1(B)
Dimension
Accessory
Xaiv tau
| DS-KAW 50-1 | DS-KAW 50-1N | DS-KAB 9510-T |
 |
 |
 |
Cov ntaub ntawv / Cov ntaub ntawv
 |
HIKVISION DS-KV6113-WPE1(C) Multi Language POE Video Intercom Kit [ua pdf] Tus neeg siv phau ntawv DS-KV6113-WPE1 C, DS-KH9510-WTE1 B, DS-KV6113-WPE1 C Multi Language POE Video Intercom Kit, DS-KV6113-WPE1 C, Multi Language POE Video Intercom Kit, Lus POE Video Intercom Kit, Video Intercom Kit, Intercom Kit |