D-LINK DWL-2700AP Access Point Command Line Interface Reference
Cov ntaub ntawv khoom
Khoom npe: DWJ-2700AP
Yam khoom: 802.11b/g Access Point
Phau ntawv Version: Ver 3.20 (Lub Ob Hlis 2009)
Recyclable: Yog lawm
Cov neeg siv phau ntawv: https://manual-hub.com/
Specifications
- Txhawb 802.11b/g wireless qauv
- Command Line Interface (CLI) rau kev teeb tsa thiab kev tswj hwm
- Telnet nkag mus rau kev tswj chaw taws teeb
- Tsis muaj tus password thawj zaug yuav tsum tau nkag mus
Cov lus qhia siv khoom
Nkag mus rau CLI
Lub DWL-2700AP tuaj yeem nkag tau siv Telnet. Ua raws li cov kauj ruam no kom nkag mus rau CLI:
- Qhib Command Prompt ntawm lub computer uas yuav siv rau kev teeb tsa thiab kev tswj hwm.
- Nkag mus rau qhov hais kom ua
telnet <AP IP address>.
Rau example, yog tias lub neej ntawd IP chaw nyob yog 192.168.0.50, sautelnet 192.168.0.50. - Ib tug ID nkag mus screen yuav tshwm. Sau tus username li
adminthiab nias Enter. - Tsis xav tau tus password thawj zaug, yog li nias Enter dua.
- Koj tau ua tiav nkag rau hauv DWL-2700AP.
Kev siv CLI
CLI muab ntau yam txiaj ntsig zoo. Rau view cov lus txib muaj, nkag mus ? or help thiab nias Enter.
Yog tias koj nkag mus rau qhov hais kom ua yam tsis muaj tag nrho nws qhov yuav tsum tau ua, CLI yuav ceeb toom koj nrog cov npe ua tiav. Rau example, if you enter tftp, ib qho screen yuav tso saib tag nrho cov tau hais kom ua tiav rau tftp.
Thaum ib qho lus txib yuav tsum muaj qhov sib txawv lossis tus nqi uas yuav tsum tau teev tseg, CLI yuav muab cov ntaub ntawv ntxiv. Rau example, if you enter snmp authtrap, tus nqi uas ploj lawm (enable/disable) yuav raug tso tawm kom pom.
Command Syntax
Cov cim hauv qab no yog siv los piav qhia cov lus txib thiab qhia qhov tseem ceeb thiab cov lus sib cav:
<>: Muab qhov sib txawv los yog tus nqi uas yuav tsum tau teev tseg. Example:set login <username>[]: Encloses tus nqi yuav tsum tau los yog txheej ntawm cov kev sib cav yuav tsum tau. Example:get multi-authentication [index]:: Sib cais cov khoom sib koom ua ke hauv ib daim ntawv teev npe, ib qho yuav tsum tau nkag mus.
Cov lus nug nquag
Q: Kuv tuaj yeem nkag mus rau DWL-2700AP Command Line Interface li cas?
A: Koj tuaj yeem nkag mus rau CLI los ntawm kev siv Telnet thiab nkag mus rau IP chaw nyob ntawm DWL-2700AP hauv Command Prompt.
Q: Dab tsi yog tus neeg siv lub npe thiab tus password rau kev nkag mus rau CLI?
A: Lub npe siv lub neej ntawd yog admin, thiab tsis tas yuav tsum muaj tus password thawj zaug.
DWJ-2700AP
802.11b/g Access Point
Command Line Interface Reference Phau ntawv
Ver 3.20 (Lub Ob Hlis 2009)
RECYCLABLE
SIV LUB CLI
Lub DWL-2700AP tuaj yeem nkag los ntawm Telnet. Siv Microsoft Windows Operation System li example, qhib Command Prompt ntawm lub khoos phis tawj uas yuav siv rau kev teeb tsa thiab tswj hwm AP thiab nkag mus rau telnet thiab IP chaw nyob ntawm DWL-2700AP hauv thawj kab. Siv lub neej ntawd IP chaw nyob li example, nkag mus rau telnet 192.168.0.50 ua rau lub vijtsam hauv qab no qhib:
Nias Enter hauv qhov screen saum toj no. Qhov screen hauv qab no qhib:
Ntaus "admin" rau D-Txuas Access Point tus ID nkag mus username hauv qhov screen saum toj no thiab nias Enter. Qhov screen hauv qab no qhib:
Nias Enter vim tsis muaj tus password thawj zaug.
Lub vijtsam hauv qab no qhib los qhia tias koj tau nkag mus rau DWL-2700AP tiav.
Cov lus txib tau nkag rau ntawm qhov hais kom ua, D-Link Access Point wlan1 ->
Muaj ntau yam kev pab cuam muaj nyob rau hauv CLI. Nkag mus rau "?" hais kom ua thiab tom qab ntawd nias Enter yuav tso tawm cov npe ntawm tag nrho cov lus txib saum toj kawg nkaus. Tib cov ntaub ntawv tseem tuaj yeem tso tawm los ntawm kev nkag mus rau "pab".
Nias Enter kom pom cov npe ntawm tag nrho cov lus txib muaj. Xwb, koj tuaj yeem nkag mus rau "pab" thiab nias Enter.
Thaum koj nkag mus rau ib qho kev hais kom ua yam tsis muaj tag nrho nws qhov yuav tsum tau ua, CLI yuav ceeb toom koj nrog cov npe ua tiav. Rau example, yog tias "tftp" tau nkag mus, lub vijtsam hauv qab no qhib:
Lub vijtsam no qhia tag nrho cov lus txib ua tiav rau "tftp" Thaum koj nkag mus rau qhov hais kom ua yam tsis muaj qhov sib txawv lossis tus nqi uas yuav tsum tau teev tseg, CLI yuav ceeb toom koj nrog cov ntaub ntawv ntxiv txog qhov xav tau los ua kom tiav cov lus txib. Rau example, yog tias "snmp authtrap" tau nkag mus, lub vijtsam hauv qab no qhib:
Tus nqi uas ploj lawm rau "snmp authtrap" hais kom ua, "pab / lov tes taw," yog tshwm sim hauv qhov screen saum toj no.
COMMAND SYNTAX
Cov cim hauv qab no yog siv los piav qhia txog yuav ua li cas cov lus txib tau ua thiab cov txiaj ntsig thiab cov lus sib cav tau teev tseg hauv phau ntawv no. Cov kev pab online muaj nyob rau hauv CLI thiab muaj los ntawm lub console interface siv tib lub syntax.
Nco tseg: Tag nrho cov commands yog case-insensitive.
| Lub hom phiaj | Ncua qhov sib txawv los yog tus nqi uas yuav tsum tau teev tseg. |
| Syntax | teem tus ID nkag mus |
| Kev piav qhia | Nyob rau hauv lub saum toj no syntax example, koj yuav tsum teev cov tus neeg siv lub npe. Tsis txhob ntaus lub kaum sab xis. |
| Example Command | teeb tus ID nkag mus accounting |
| [square brackets] | |
| Lub hom phiaj | Encloses tus nqi yuav tsum tau los yog txheej ntawm cov kev sib cav yuav tsum tau. Ib tus nqi lossis kev sib cav tuaj yeem teev tseg. |
| Syntax | tau multi-authentication [index] |
| Kev piav qhia | Nyob rau hauv lub saum toj no syntax example, koj yuav tsum teev ib tug qhov ntsuas tsim nyog. Tsis txhob ntaus cov square brackets. |
| Example Command | tau multi-authentication 2 |
| :colon | |
| Lub hom phiaj | Cais ob lossis ntau qhov sib koom ua ke hauv ib daim ntawv teev npe, ib qho yuav tsum tau nkag mus. |
| Syntax | teem kav hlau txais xov [1:2: zoo tshaj] |
| Kev piav qhia | Nyob rau hauv lub saum toj no syntax example, koj yuav tsum qhia ib yam 1, 2 or
zoo tshaj plaws. Tsis txhob ntaus cov nyuv. |
| Example Command | teem kav hlau txais xov zoo tshaj plaws |
UTILITY COMMANDS
| Pab Command: | Muaj nuj nqi | Syntax |
| pab | Tso cov npe CLI hais kom ua | pab los yog? |
| Ping hais kom ua: | Muaj nuj nqi | Syntax |
| ping | Ping | ping |
| Restart thiab Exit Commands: | Muaj nuj nqi | Syntax |
| teeb lub Hoobkas pib | Rov qab mus rau Default Factory Settings | teeb lub Hoobkas pib |
| rov pib dua | Reboot Access Point. Nws yog ib qho tsim nyog yuav tsum rov pib dua AP tom qab ua qhov kev hloov pauv rau cov kev hloov pauv kom muaj txiaj ntsig. | rov pib dua |
| tawm | Logoff | tawm |
| Version Display Command: | Muaj nuj nqi | Syntax |
| version | Qhia txog qhov tam sim no loaded firmware version | version |
| System Status Command: | Muaj nuj nqi | Syntax |
| tau bdtempmode | Display Monitor Board Temperature Mode | tau bdtempmode |
| teeb bdtempmode | Teem Lub Rooj Tswjhwm Saib Xyuas Qhov Kub Kub (hauv Centigrade) | teeb bdtempmode [pab: disable] |
| tau bdalarmtemp | Display Monitor Board Temperature Alarm Limitation (hauv Centigrade) | tau bdalarmtemp |
| teeb bdalarmtemp | Teem Lub Rooj Tswjhwm Saib Xyuas Kev Kub Ntxhov Tswb Txwv (hauv Centigrade) | teeb bdalarmtemp |
| tau bdcurrenttemp | Tso saib tam sim no Board Temperature (In Centigrade) | tau bdcurrenttemp |
| teem detectlightmode | Teem HW Detect Light Mode | teem detectlightmode [pab: disable] |
| Addminstration Hais kom ua: | Muaj nuj nqi | Syntax |
| nkag mus | Saib Tus Neeg Siv Khoom Lub Npe | nkag mus |
| tau uptime | Zaub UpTime | tau uptime |
| teem tus ID nkag mus | Hloov kho tus neeg siv lub npe | teem tus ID nkag mus |
| teeb tus password | Hloov Password | teeb tus password |
| tau wlanManage | Zaub tswj AP nrog WLAN hom | tau wlanManage |
| teeb wlanmanage | Teem tswj AP nrog WLAN hom | teeb wlanmanage [enable:disable] |
| tau systemname | Tso saib Access Point System Name | tau systemname |
| teeb lub npe | Qhia rau Access Point System Name | teeb lub npe |
| Lwm yam Command: | Muaj nuj nqi | Syntax |
| radar ua! | Simulate radar nrhiav pom ntawm channel tam sim no | radar ua! |
ETHERNET COMMANDS
| Tau Command: | Muaj nuj nqi | Syntax |
| qib ipaddr | Qhia IP chaw nyob | qib ipaddr |
| ua ipmask | Zaub IP Network/Subnet Mask | ua ipmask |
| tau lub rooj vag | Tso saib Gateway IP Chaw Nyob | tau lub rooj vag |
| qib lcp | Display Link Integrate state | qib lcp |
| qib lcplink | Tso saib Ethernet Link State | qib lcplink |
| qib dhcpc | Tso saib DHCP Client State of enabled lossis disabled | qib dhcpc |
| tau domainsuffix | Tso saib Domain Name Server Suffix | tau domainsuffix |
| npe addr | Qhia IP Chaw Nyob Ntawm Lub Npe Server | npe addr |
| Teeb Command: | Muaj nuj nqi | Syntax |
| teem hostipaddr | Teem Boot Host IP Chaw Nyob | teem hostipaddr Kev piav qhia: yog IP chaw nyob |
| ua ipaddr | Teem IP Chaw Nyob | ua ipaddr
Kev piav qhia: yog IP chaw nyob |
| teeb ipmask | Teem IP Network / Subnet Mask | teeb ipmask <xxx.xxx.xxx.xxx>
Kev piav qhia: yog Network mask |
| ua lcp | Teem Lcp State | set lcp [0:1] Piav: 0=disable 1=enable |
| teeb rooj vag | Teem lub rooj vag IP chaw nyob | teeb rooj vag
Kev piav qhia: yog Gateway IP chaw nyob |
| ua dhcpc
set domainsuffix set nameaddr
ua ethctrl |
Teem DHCP Clinet Lub Xeev ntawm pab lossis xiam oob khab Teem Lub Npe Lub Npe Server Suffix
Teem lub npe neeg rau zaub mov IP chaw nyob
ethernet tswj ceev thiab FullDuplex |
teeb dhcp[disable:enable] set domainsuffix
set nameaddr [1:2] teeb ethctrl[0:1:2:3:4] Kev piav qhia: 0: ua auto 1: 100M FullDuplex 2: 100M HalfDuplex 3: 10M FullDuplex 4: 10M HalfDuplex |
WIRELESS COMMANDS
| Tseem ceeb | ||
| Config Commands: | Muaj nuj nqi | Syntax |
| config wb | Xaiv WLAN Adapter los teeb tsa. DWL-2700AP tsuas yog WLAN 1 muaj rau kev teeb tsa. Cov lus txib no tsis tsim nyog. | config wlan [0:1] |
| Nrhiav cov lus txib: | ||
| nrhiav bss | Ua Kev Tshawb Fawb Hauv Chaw, Kev pabcuam Wireless yuav raug cuam tshuam | nrhiav bss |
| nrhiav channel | Channel spanning mus xaiv qhov Nyiam Channel | nrhiav channel |
| nrhiav tag nrho | Ua Kev Tshawb Fawb Hauv Chaw suav nrog Super G thiab Turbo, kev pabcuam Wireless yuav raug cuam tshuam | nrhiav tag nrho |
| nrhiav neeg phem | Nrhiav Rogue BSS | nrhiav neeg phem |
| Tau Command: | Muaj nuj nqi | Syntax |
| tau apmode | Tso saib AP hom tam sim no | tau apmode |
| qib ssd | Display Service Set ID | qib ssd |
| tau ssidsuppress | Zaub SSID Ncua Hom yog qhib los yog xiam oob qhab | tau ssidsuppress |
| tau chaw nres tsheb | Tso saib Client Station Connection Status | tau chaw nres tsheb |
| qib wdsap | Tso saib WDS Access Point List | qib wdsap |
| tau remoteAp | Tso saib tej thaj chaw deb AP's Mac Chaw Nyob | tau remoteAp |
| tau kev koom tes | Display Association Table uas qhia txog cov ntaub ntawv ntawm cov neeg siv khoom cuam tshuam | tau kev koom tes |
| tau autochannelselect | Tso saib lub xeev ntawm Auto Channel Xaiv feature (ua haujlwm, xiam oob qhab) | tau autochannelselect |
| tau channel | Tso Tawm Xov Tooj Cua Frequency (MHz) thiab Channel Tsim | tau channel |
| tau muaj channel | Tso saib cov xov tooj cua muaj | tau muaj channel |
| tau tus nqi | Muab cov ntaub ntawv tus nqi xaiv tam sim no. Default yog qhov zoo tshaj plaws. | tau tus nqi |
| tau beaconinterval | Qhia Beacon Interval | tau beaconinterval |
| qib dtim | Tso Tawm Kev Xa Tsheb Nres Qhia Xov Xwm Beacon Tus Nqi | qib dtim |
| tau fragmentthreshold | Qhia Fragment Threshold hauv bytes | tau fragmentationthreshold |
| tau rtsthreshold | Qhia RTS/CTS Threshold | tau rtsthreshold |
| tau txais lub hwj chim | Zaub Transmit Fais Fab Teeb: Puv, ib nrab, quarter, yim, min | tau txais lub hwj chim |
| tau wlanstate | Tso saib Wireless LAN xeev xwm txheej (enabled lossis disabled) | tau wlanstate |
| tau shortpreamble | Zaub Short Preamble Usage state: enabled lossis disabled | tau shortpreamble |
| tau wirelessmode | Zaub Wireless LAN hom (11b lossis 11g) | tau wirelessmode |
| tau 11 gon | Zaub 11g Tsuas yog hom kev ua haujlwm ntawm lub xeev tau qhib lossis xiam oob qhab | tau 11 gon |
| tau kav hlau txais xov | Zaub kav hlau txais xov Diversity ntawm 1, 2, los yog zoo tshaj plaws | tau kav hlau txais xov |
| qib sta2 | Tso saib wireless STAs rau wireless STAs txuas lub xeev | qib sta2 |
| qib eth2 | Tso saib ethernet rau wireless STAs txuas lub xeev | qib eth2 |
| tau trapsevers | Tau txais cuab yeej server xeev | tau trapsevers |
| qib eth2wl | Tso saib Eth2Wlan tshaj tawm cov pob ntawv lim lub xeev | qib eth2wl |
| tau macaddress | Tso Mac Chaw Nyob | tau macaddress |
| tau config | Tso saib AP Configuration Settings tam sim no | tau config |
| tau countrycode | Kev teeb tsa Lub Tebchaws Code | tau countrycode |
| tau kho vajtse | Qhia kho kho vajtse ntawm WLAN Cheebtsam | tau kho vajtse |
| tau kev laus | Tso saib Aging Interval hauv vib nas this | tau kev laus |
| tau MulticastPacketControl | Zaub Multicast Packet Control xeev | tau MulticastPacketControl |
| tau MaxMulticastPacketNumber | Zaub Max Multicast Packet Number | tau MaxMulticastPacketNumber |
| tau 11 goptimize | Zaub 11g Optimization Level | tau 11 goptimize |
| tau 11govoverlapbss | Zaub Overlapping BSS Tiv Thaiv | tau 11govoverlapbss |
| tau asocnum | Qhia Number Of Association STA | tau asocnum |
| tau eth2wlanfilter | Zaub Eth2WLAN BC & MC lim hom | tau eth2wlanfilter |
| tau extendedchanmode | Tso saib Extended Channel hom | tau extendedchanmode |
| qib iapp | Qhia IAPP State | qib iapp |
| tau iapplist | Tso saib IAPP Group List | tau iapplist |
| tau iappuser | Tso saib IAPP Tus Neeg Siv Txwv Tus lej | tau iappuser |
| tau yam tsawg kawg nkaus | Zaub Yam tsawg kawg nkaus | tau yam tsawg kawg nkaus |
| tau dfsinforshow | Qhia DFS cov ntaub ntawv | tau dfsinforshow |
| qib wdrs | Tso saib WDS Access Point RSSI | qib wdrs |
| tau ackmode | Zaub Variable Ack Time Mode | tau ackmode |
| tau acktimeout | Tso saib Ack Time Out Number | tau acktimeout |
| Teeb Command: | Muaj nuj nqi | Syntax |
| teem apmode | Teem AP hom rau ib txwm AP, WDS nrog AP hom, WDS tsis muaj AP hom lossis AP Client | set apmode [ap:wdswithap:wds:apc] |
| set ssd | Teem Service Set ID | set ssd |
| teem ssidsuppress | Teem SSID Suppress Hom pab los yog lov tes taw | teeb ssidsuppress [disable: pab] |
| teeb autochannelselect | Teem Auto Channel Xaiv kom pab lossis lov tes taw | teeb autochannelselect [disable:enable] |
| teem tus nqi | Teem cov ntaub ntawv tus nqi | set rate [best:1:2:5.5:6:9:11:12:18:24:36:48:54] |
| teem beaconinterval | Hloov Kho Beacon Interval 20-1000 | teeb beaconinterval [20-1000] |
| set dti | Teem Kev Xa Khoom Qhia Kev Qhia Xov Xwm Beacon Tus Nqi. Default yog 1 | set dtim [1-255] |
| teeb fragmentthreshold | Teem Fragment Threshold | teem fragmentationthreshold [256-2346] |
| teem rtsthreshold | Teem RTS/CTS Threshold hauv bytes | teem rtsthreshold [256-2346f] |
| teem zog | Teem Lub Hwj Chim Fais Fab nyob rau hauv predefined increments | teem zog [full:half:quarter: yim:min] |
| teeb roguestatus | Teem Rogue AP xwm txheej | teeb roguestatus [pab: disable] |
| teeb roguebsstypestatus | Teem Rogue AP BSS hom xwm txheej | set roguebsstypestatus [pab: disable] |
| teeb roguebsstype | Teem ROGUE AP BSS Hom | teeb roguebsstype [apbss:adhoc:ob leeg'] |
| teeb roguesecuritystatus | Teem Rogue AP Security Hom xwm txheej | set roguesecuritystatus [pab: disable] |
| teeb roguesecurity | Teem ROGUE AP Security Hom | teeb roguesecurity |
| teeb roguebandselectstatus | Teem Rogue AP Band Xaiv cov xwm txheej | teeb roguebandselectstatus [pab: disable] |
| teeb roguebandselect | Teem ROGUE AP Band Xaiv | teeb roguebandselect |
| teeb wlanstate | Xaiv lub xeev kev ua haujlwm ntawm wlan: enabled lossis disabled | set wlanstate [disable:enable] |
| teem shortpreamble | Teem Short Preamble | teem shortpreamble [disable: enable] |
| teeb wirelessmode | teeb wirelessmode rau 11b / 11g. | teeb wirelessmode [11a:11b:11g] CEEB TOOM: 11a tsis txaus siab. |
| set 11 ib | Tsuas yog 802.11g cov neeg siv yuav raug tso cai txuas rau BSS no | teeb 11gonly [disable:enable] |
| teem kav hlau txais xov | Teem lub kav hlau txais xov xaiv 1, 2, lossis zoo tshaj plaws | teem kav hlau txais xov [1:2: zoo tshaj] |
| teem caij nyoog | Teem caij nyoog laus | teem caij nyoog |
| teeb channel | Xaiv Xov Tooj Cua Channel ntawm Kev Ua Haujlwm | set channel [1:2:3:4:5:6:7:8:9:10:11] |
| ua eth2wlan | Pab lossis Disable Eth2Wlan Broadcast packet filter feature | set eth2wlan [0:1]
Piav: 0=disable:1=enable |
| ua sta2 | Teem wireless STAs rau wireless STAs txuas lub xeev (WLAN Partition) | teeb sta2sta [disable: pab] |
| ua eth2sta | Teem ethernet rau wireless STAs txuas lub xeev | teeb eth2sta [disable: enable] |
| teem trapsevers | Teem lub cuab tam server | teeb trapsevers [disable:enable] |
| teeb MulticastPacketControl | Qhib lossis Disable Multicast Packet Control | teem MulticastPacketControl [0:1] Piav: 0=disable:1=enable |
| teem MaxMulticastPacketNumber teem ncuachanmode
teeb eth2wlanfilter teeb ackmode teem caij acktimeout set iapp set iappuser |
Teem Max Multicast Packet Number Teem Ntxiv Channel Hom
Teem Eth2WLAN Broadcast & Multicast Lim hom
Teem Ack hom Teem Ack Timeout Number Teeb IAPP Xeev. Teem IAPP Tus Neeg Siv Txwv Tus lej |
teem MaxMulticastPacketNumber [0-1024]
teeb extendedchanmode [disable:enable] teeb eth2wlanfilter [1:2:3] Nqe lus piav qhia: 1 = Tshaj tawm lim: 2 = Multicast lim: 3 = Ob leeg ntawm BC thiab MC. teeb ackmode [pab: disable] teeb acktimeout set iapp [0:1] Piav: 0 = kaw 1 = qhib set iappuser [0-64] |
| Kev ruaj ntseg | ||
| Del Command: | Muaj nuj nqi | Syntax |
| del key | Rho tawm tus yuam sij encryption | del key [1-4] |
| Tau Command: | Muaj nuj nqi | Syntax |
| tau encryption | Display (WEP) configuration state (enabled or disabled) | tau encryption |
| tau authentication | Tso saib hom ntawv pov thawj | tau authentication |
|
qib ciph |
Zaub Encryption cipher hom Piav Qhia:
Teb WEP rau xaiv WEP Teb Auto rau xaiv WPA-Auto Resopnse AES rau xaiv WPA-AES Teb TKIP rau xaiv WPA-TKIP |
qib ciph |
|
tau keysource |
Zaub Source Of Encryption Keys: Piav Qhia:
Teb Flash Memory rau qhov tseem ceeb zoo li qub Teb Chaws Saib Xyuas Qhov Tseem Ceeb rau qhov tseem ceeb dynamic Teb sib xyaw rau kev sib xyaw zoo li qub thiab dynamic yuam sij |
tau keysource |
| tau key | Tso saib WEP encryption Key | tau qhov tseem ceeb [1-4] |
| tau keyentrymethod | Zaub Encryption Key Entry Method ASCII lossis Hexadecimal | tau keyentrymethod |
| tau groupkeyupdate | Tso saib WPA Pab Pawg Tseem Ceeb Hloov Kho Lub Sij Hawm (hauv Ob) | tau groupkeyupdate |
| tau defaultkeyindex | Tso saib Active Key Index | tau defaultkeyindex |
| tau dot1xweptype | Zaub 802.1x Wep Key Hom | tau dot1xweptype |
| tau reuthperiod | Lub Sijhawm Ua Haujlwm Saib Xyuas Kev Ua Haujlwm Zoo | tau reuthperiod |
| Teeb Command: | Muaj nuj nqi | Syntax |
| teeb encryption | Qhib lossis Disable Encryption Hom | teeb encryption [disable: enable] |
| teem authentication | Teem Authentication Hom | teem authentication [qhib system: sib koom-tus yuam sij: auto: 8021x: WPA: WPA-PSK: WPA2: WPA2-PSK: WPA-AUTO: WAP2-AUTO-PSK] |
| teeb cipher | Teem Cipher ntawm wep, aes, tkip, lossis pib sib tham | set cipher [wep:aes:tkip:auto] |
| teem groupkeyupdate | Teem Pab Pawg Tseem Ceeb Hloov Kho Lub Sij Hawm (hauv Thib Ob) rau TKIP | teem groupkeyupdate |
| teem tus yuam sij | Siv los teeb tsa tus txheej txheem wep tus nqi thiab qhov loj me | teem key [1-4] default
set key [1-4] [40:104:128] <tus nqi> |
| teem keyentrymethod | Xaiv Ntawm ASCII lossis HEX encryption key hom ntawv | teem keyentrymethod [asciitext : hexadecimal] |
| teem keysource | Xaiv Qhov Chaw ntawm Cov Ntsiab Lus Encryption: static(flash), dynamic (server), sib xyaw | teem keysource [flash:server:mixed] |
| teeb passphrase teeb dot1xweptype
teem lub sijhawm rov qab los |
Hloov cov lus zais
Teem 802.1x Wep Key Hom Teem Lub Sijhawm Kev Ua Haujlwm Rov Qab Los Ntawm Phau Ntawv |
teem passphrase teeb dot1xweptype [static: dynamic] teeb reauthperiod
Kev piav qhia: yog qhov tshiab priod. |
| WM | ||
| Tau Command: | Muaj nuj nqi | Syntax |
| qib wm | Tso saib WMM hom xwm txheej (enabled lossis disabled) | qib wm |
| tau wmmParamBss | Tso saib WMM tsis siv los ntawm STA hauv BSS no | tau wmmParamBss |
| tau wmmParam | Tso saib WMM tsis siv los ntawm AP no | tau wmmParam |
| Teeb Command: | Muaj nuj nqi | Syntax |
| set wm | Qhib lossis Disable WMM Nta | set wmm [disable:enable] |
|
teeb wmmParamBss ac |
Teem WMM (EDCA) tsis siv los ntawm STAs hauv BSS no |
set wmmParamBss ac [AC num] [logCwMin] [logCwMax] [aifs] [txOpLimit] [acm]
Kev piav qhia: AC tus lej: 0->AC_BE 1-> AC_BK 2-> AC_BK 3-> AC_BK Exampble: set wmmParamBss ac 0 4 10 3 0 0 |
|
set wmmParam ac |
Teem WMM (EDCA) tsis siv los ntawm AP no |
set wmmParamBss ac [AC num] [logCwMin] [logCwMax] [aifs] [txOpLimit] [acm] [ack-policy]
Kev piav qhia: AC tus lej: 0->AC_BE 1-> AC_BK 2-> AC_BK 3-> AC_BK |
MULTI-SSID THIAB VLAN COMMANDS
| Tau Command: | Muaj nuj nqi | Syntax |
| tau vlanstate | Tso saib Vlan State xwm txheej (enabled lossis disabled) | tau vlanstate |
| tau vlanmanage | Zaub tswj AP nrog VLAN hom | tau vlanmanage |
| tau nativevlan | Display Native Vlan tag | tau nativevlan |
| qib Vlantag | Display Vlan tag | qib Vlantag |
| tau ntau lub xeev | Tso saib Multi-SSID hom (ua haujlwm lossis tsis ua haujlwm) | tau ntau lub xeev |
| tau multi-ind-state [index] | Tso saib Tus Kheej Multi-SSID Lub Xeev | tau multi-ind-state [index] |
| tau multi-ssid [index] | Tso saib SSID ntawm qhov qhia meej Multi-SSID | tau multi-ssid [index] |
| tau multi-ssidsuppress [index] | Tso saib SSID Txhaum hom ntawm qhov qhia meej Multi-SSID | tau multi-ssidsuppress [index] |
| tau multi-authentication [index] | Tso saib Authentication Hom rau Multi-SSID | tau multi-authentication [index] |
| tau multi-cipher [index] | Zaub Encryption cipher rau Multi-SSID | tau multi-cipher [index] |
| tau multi-encryption [index] | Zaub Encryption Hom rau Multi-SSID | tau multi-encryption [index] |
| tau multi-keyentrymethod | Zaub Encryption Key Entry Method rau Multi-SID | tau multi-keyentrymethod |
| tau multi-vlantag [index] | Display Vlan tag rau Multi-SSID | tau multi-vlantag [index] |
| tau multi-key [index] | Tso saib Encryption Key rau Multi-SSID | tau multi-key [index] |
| tau multi-keysource [index] | Tso saib Qhov Chaw Tseem Ceeb rau Multi-SSID | tau multi-keysource [index] |
| tau multi-config [index] | Tso AP Configuration rau Multi-SSID | tau multi-config [index] |
| tau multi-passphrase [index] | Zaub Passphrase rau Multi-SSID | tau multi-passphrase [index] |
| tau multi-dot1xweptype [index] | Zaub 802.1x Wep Key Hom Rau Multi-SSID | tau multi-dot1xweptype [index] |
| Teeb Command: | Muaj nuj nqi | Syntax |
| teeb vlanstate | Qhib lossis Disable VLAN | set vlanstate [disable:enable]
Nco tseg: Yuav tsum Qhib Multi-SSID ua ntej |
| teeb vlanmanage | Teeb Enabled lossis Disable tswj AP nrog VLAN | teeb vlanmanage [disable:enable] Ceeb toom: Yuav tsum Enable vlanstate ua ntej |
| set nativevlan | Set Native Vlan Tag | set nativevlan [1-4096] |
| set Vlantag | Teeb VLAN Tag | set vlantag <tag tus nqi> |
| teeb Vlanpristate | Teem Vlan Priority State | teeb Vlanpristate [pab: disable] |
| teeb Vlanpri | Hloov kho Vlan qhov tseem ceeb | set Vlanpri [0-7] |
| set ethnotag | Teem Thawj Eth No Tag Stat | set ethnotag [enable: disable] |
| set multi-vlantag | Teeb VLAN Tag rau Multi-SSID | set multi-vlantag <tag value> [index] |
| teeb multi-ethnotag | Teem Ib Tus Kheej Eth No Tag Xeev | teeb multi-ethnotag [index] [disable:enable] |
| teem multi-vlanpri | Teem Vlan-Priorityi rau Multi-SSID | teem multi-vlanpri [pri value] [index] |
| set VlantagHom | Hloov kho Vlantag Hom | set VlantagHom ntawv [1:2] |
| set multi-vlantaghom | Set Vlan-Tag Typefor Multi-SSID | set multi-vlantaghom [tagHom nqi] [index] |
| teeb ntau lub xeev | Qhib lossis Disable Multi-SSID Nta | set multi-state [disable:enable] |
| teem multi-ind-xeev | Qhib lossis Disable tshwj xeeb Mulit-SSID | set multi-ind-state [disable:enable] [index] |
| teem multi-ssid | Teem Service Teem ID rau Multi-SSID | teem multi-ssid [index] |
| teem multi-ssidsuppress | Qhib lossis Disable tshaj tawm SSID ntawm Multi-SSID | teem multi-ssidsuppress [disable: pab] |
|
teem multi-authentication |
Teem Authentication Hom rau Multi-SSID |
teem multi-authentication [open-system:shared-key:wpa:wpa-psk:wpa2:wpa2-psk:wpa-auto:w pa-auto-psk:8021x] [index] |
| teem multi-cipher | Teeb Cipher rau Multi-SSID | teem multi-cipher [wep:aes:tkip:auto] [index] |
| teem multi-encryption | Teem encryption hom rau Multi-SSID | teem multi-encryption [disable:enable] [index] |
| teem multi-keyentrymethod | Xaiv Encryption Key Entry Method rau Multi-SSID | teem multi-keyentrymethod [hexadecimal: asciitext] [index] |
| set multi-vlantag [tag value] [index] | Teeb VLAN Tag Rau Multi-SSID | set multi-vlantag [tag value] [index] |
| teem multi-key | Teeb Encryption Key rau Multi-SSID | teem multi-key default [key index] [Multi-SSID index] |
|
teem multi-keysource |
Teem Lub Taub Hau Ntawm Cov Ntsiab Lus Encryption Rau Multi-SSID |
set multi-dot1xweptype [flash:server:mixed] [index] Lus piav qhia:
flash = Teem Tag nrho cov yuam sij yuav nyeem los ntawm Flash: server = Teem Tag nrho cov yuam sij yuav muab tau los ntawm kev lees paub tus neeg rau zaub mov sib xyaw = Teeb Cov Ntsiab Lus Nyeem Los ntawm Flash lossis muab los ntawm Kev lees paub Server |
| teem multi-passphrase
teem multi-dot1xweptype |
Teem PassPhrase rau Multi-SSID
Teem 802.1x Wep Key Hom Rau Multi-SSID |
teem multi-passphrase [index]
teem multi-dot1xweptype [static: dynamic] [index] |
TXOJ CAI CONTROL LIST COMMANDS
| Del Command: | Muaj nuj nqi | Syntax |
| ua acl | Rho tawm cov ntawv teev npe Access Control nkag | del acl [1-16] |
| ua wdsacl | Rho tawm WDS ACL nkag: 1-8 | del wdsacl [1-8] |
| Tau Command: | Muaj nuj nqi | Syntax |
| qib acl | Tso saib Access Control Teeb ntawm Enabled lossis disabled | qib acl |
| qib wdscl | Tso saib WDS Access Control List | qib wdscl |
| Teeb Command: | Muaj nuj nqi | Syntax |
| teem acl pab | Xaiv ACL txwv kev nkag mus rau MAC chaw nyob | teem acl pab |
| teeb acl disable | Xaiv Unrestricted access | teeb acl disable |
| set acl tso | Ntxiv MAC chaw nyob rau qhov tso cai ACL | set acl tso |
| teem acl tsis kam | Ntxiv MAC chaw nyob rau qhov tsis lees paub ACL | teem acl tsis kam |
| teem acl nruj | Xaiv Txwv Kev Nkag Mus, tsuas yog cov neeg siv nrog MAC tso cai yuav sib txuas lus | teem acl nruj |
|
teem acl keymap |
Ntxiv WEP Encryption Key mapping rau MAC Chaw Nyob |
teem acl keymap [1-4]
teem acl keymap ua ntej teem acl keymap [40:104:128] <nqi> |
| teem wdsacl tso cai | Ntxiv MAC Chaw Nyob rau WDS List | teem wdsacl tso cai |
| IPfilter hais kom ua: | Muaj nuj nqi | Syntax |
| ipfilter xeev | Tso saib lossis teeb tsa IP chaw deb Acl State | ipfilter xeev
ipfilter xeev [accept:disable:reject] |
| ipfilter ntxiv | Ntxiv tus IP nkag | ipfilter ntxiv |
| ipfilter ua | Siv tus IP nkag | ipfilter ua |
| ipfilter ntshiab | Clear IP Pool | ipfilter ntshiab |
| Ipfilter lis | Qhia IP Pool | ipfilter lis |
| Ethacl hais kom ua: | Muaj nuj nqi | Syntax |
| ethcl xeev | Zaub lossis Teeb Ethernet Acl State | ethcl xeev
ethacl xeev [accept:off:reject] |
| ethcl ua | Ntxiv Mac Nkag mus | ethcl add < xx:xx:xx:xx:xx:xx > |
| ethcl ua | Del Mac Nkag mus | ethcl del < xx:xx:xx:xx:xx:xx > |
| ethcl ntshiab | Clear MAC Pas Dej | ethcl ntshiab |
| ethcl lis | Qhia MAC Pas Dej | ethcl lis |
| Ipmanager hais kom ua: | Muaj nuj nqi | Syntax |
| ipmanager xeev | Tso saib lossis teeb tsa IP chaw tswj hwm lub xeev | ipmanager xeev ipmanager xeev [rau: tawm] |
| ipmanager ntxiv | Ntxiv tus IP nkag | ipmanager ntxiv |
| ipmanager ua del | Siv tus IP nkag | ipmanager ua del |
| ipmanager ntshiab | Clear IP Pool | ipmanager ntshiab |
| ipmanager lis | Qhia IP Pool | ipmanager lis |
| IGMP snooping hais kom ua: | Muaj nuj nqi | Syntax |
| igmp xeev | IGMP snooping xeev | igmp xeev [pab, lov tes taw] |
| igmp pab | IGMP snooping pab | igmp pab |
| igmp disable | IGMP snooping lov tes taw | igmp disable |
| igmp ua | IGMP MDB pob tseg | igmp ua |
| igmp setrssi igmp getrssi
igmp kevtaglub sijhawm igmp uataglub sijhawm |
teeb igmp snp rssi qhov pib tau igmp snp rssi qhov pib teeb igmp snp chaw nres nkoj lub sijhawm laus
tau igmp snp port aging time |
igmp setrssi [0-100] igmp getrssi
igmp kevtagLub sijhawm ua haujlwm [0-65535] igmp uataglub sijhawm |
| rogue Command: | Muaj nuj nqi | Syntax |
| rogue ntxiv rogue del rogue deleep rogue list
rogue lis |
Ntxiv Rogue Access Point Result Nkag mus rau Rogue Access Point Result Nkag mus rau Rogue Access Point Result Nkag Mus Saib Rogue Access Point Detection Result
Tso saib Rogue Access Point Detection Result |
rogue add [index] rogue del [index] rogue deleep [index] rogue list
rogue lis |
RADIUS SERVER COMMANDS
| Tau Command: | Muaj nuj nqi | Syntax |
| npe radius | Tso saib RADIUS server lub npe lossis IP chaw nyob | npe radius |
| tau radiusport | Tso saib RADIUS chaw nres nkoj naj npawb | tau radiusport |
| tau accountingstate | Tso saib Accounting hom | tau accountingstate |
| tau accountingname | Tso saib Accounting server lub npe lossis IP chaw nyob | tau accountingname |
| tau accountingport | Qhia Accounting chaw nres nkoj naj npawb | tau accountingport |
| tau accounting2ndstate | Tso saib thib ob Accounting hom | tau accounting2ndstate |
| tau accounting2ndname | Tso saib thib ob Accounting server lub npe lossis IP chaw nyob | tau accounting2ndname |
| tau accounting2ndport | Tso saib tus lej accounting thib ob | tau accounting2ndport |
| tau accountingcfgid | Muab cov configuration ntawm Accounting tam sim no | tau accountingcfgid |
| Teeb Command: | Muaj nuj nqi | Syntax |
| teem radius npe | Teem RADIUS Server lub npe lossis IP chaw nyob | teem radius npe Kev piav qhia: yog IP chaw nyob |
| teeb radiusport | Teem RADIUS chaw nres nkoj naj npawb | teeb radiusport
Kev piav qhia: yog tus lej chaw nres nkoj, tus nqi qub yog 1812 |
| teeb radiussecret teeb accountingstate
set accountingname set accountingport teem accounting2ndstate |
Teem RADIUS qhia zais zais Teeb Accounting hom
Teem Accounting lub npe los yog IP chaw nyob Teem Accounting chaw nres nkoj naj npawb Teem thib ob Accounting hom |
teem radiussecret
set accountingstate [pab: disable] teem accountingname [xxx.xxx.xxx.xxx : servername] teeb accountingport Kev piav qhia: yog tus lej chaw nres nkoj, tus nqi qub yog 1813. set accounting2ndstate [pab: disable] |
| teev accounting2ndname | Teem thib ob Accounting server lub npe lossis IP chaw nyob | teem accounting2ndname [xxx.xxx.xxx.xxx : servername] |
| teem accounting2ndport | Teem thib ob Accounting chaw nres nkoj naj npawb | teem accounting2ndport |
| teem accountingcfgid | Teem lub configuration ntawm Accounting tam sim no | teem accountingcfgid |
DHCP SERVER COMMANDS
| Hais kom ua: | Muaj nuj nqi | Syntax |
| dhcps pab | Tso saib DHCP Server Command Help | dhcps pab |
| dhcps ua | tau DHCP Server xeev | dhcps ua |
| dhcps ua | qhib lossis kaw DHCP Server | dhcps xeev [on:off] |
| dhcps dynamic info | tau txais kev teeb tsa tam sim no | dhcps dynamic info |
| dhcps dynamic ip | teeb pib ip | dhcps dynamic ip |
| dhcps dynamic daim npog qhov ncauj | teeb netmask | dhcps dynamic daim npog qhov ncauj |
| dhcps dynamic gw | teeb rooj vag | dhcps dynamic gw |
| dhcps dynamic dns | set dns | dhcps dynamic dns |
| dhcps dynamic yeej | teeb yeej | dhcps dynamic yeej |
| dhcps dynamic ntau yam | teem caij | dhcps dynamic ntau [0-255] |
| dhcps dynamic lease | teem caij xauj tsev (sec) | dhcps dynamic lease [60- 864000] |
| dhcps dynamic domain | teem lub npe | dhcps dynamic domain |
| dhcps dynamic xeev | teeb lub xeev | dhcps dynamic xeev [rau: tawm] |
| dhcps dynamic map | tau daim ntawv teev npe | dhcps dynamic map |
| dhcps cov ntaub ntawv zoo li qub | tau teeb tsa los ntawm <0-255> rau <0-255> | dhcps cov ntaub ntawv zoo li qub [0-255] [0-255] |
| dhcps zoo ip | teeb zoo li qub pas pib ip | dhcps zoo ib ip |
| dhcps zoo li daim npog qhov ncauj | teeb static laug netmask | dhcps zoo daim npog qhov ncauj |
| dhcps zoo gw | teeb static pas dej ua ke rooj vag | dhcps zoo gw ua |
| dhcps zoo dns | teeb static laug dns | dhcps zoo dns ua |
| dhcps static yeej | teeb static pas yeej | dhcps zoo yeej |
| dhcps zoo li qub | teeb static pool domain npe | dhcps zoo sau npe |
| dhcps zoo li mac | teeb static laug mac | dhcps zoo mac ua |
| dhcps zoo li qub | teeb static pas dej ua ke xeev | dhcps zoo xeev [on:off] |
| dhcps static map | tau zoo li qub pool map lis | dhcps static map |
Nco tseg: Lub DHCP server muaj nuj nqi yog muab Dynamic IP rau Wireless Client li. Nws tsis muab IP rau Ethernet chaw nres nkoj.
SNMP COMMANDS
| txib | Muaj nuj nqi | Syntax |
|
snmp adduser |
Ntxiv Tus Neeg Siv Rau SNMP Tus Neeg Saib Xyuas |
snmp adduser [AuthProtocol] [Authkey] [PrivProtocol] [PrivKey]
Kev piav qhia: AuthProtocol: 1 Tsis yog, 2 MD5, 3 SHA Autheky: Cov hlua tseem ceeb lossis tsis muaj PrivProtocl: 1 tsis muaj, 2 DES PrivKey: Cov hlua tseem ceeb lossis tsis muaj |
| snmp lus | Rho tawm neeg siv los ntawm SNMP Agent | snmp lus |
| snmp ua | Qhia cov npe neeg siv hauv SNMP Agent | snmp ua |
| snmp setauthkey | Teem User Auth Key | snmp setauthkey |
| snmp setprivkey | Teem User Private Key | snmp setauthkey |
|
snmp addgroup |
Ntxiv Pawg Neeg Siv |
snmp addgroup [Security Level]View>
<WriteView>View> piav: Security Level: 1 no_auth no_priv, 2 auth no_priv, 3 auth priv NyeemView: los yog NULL rau Tsis muaj SauView: los yog NULL rau None NotifyView: los yog NULL rau Tsis muaj |
| snmp pab | Rho tawm pab pawg neeg siv | snmp pab |
| snmp showgroup | Qhia SNMP Pawg Chaw | snmp showgroup |
|
snmp uaview |
Ntxiv Cov Neeg Siv View |
snmp uaview <Viewnpe > [Hom] Piav Qhia:
ViewLub npe: OID: Hom: 1: suav nrog, 2: tsis suav nrog |
|
snmp uaview |
Rho tawm neeg siv View |
snmp uaview <Viewnpe > Kev piav qhia:
ViewLub npe: OID: los yog tag nrho rau tag nrho OID |
| snmp kevview | Qhia neeg siv View | snmp kevview |
| snmp editpubliccomm | Kho kom raug pej xeem kev sib txuas lus String | snmp editpubliccomm |
| snmp editprivatecomm | Kho cov kev sib txuas lus ntiag tug String | snmp editprivatecomm |
|
snmp npe |
Ntxiv Txoj Kev Sib Txuas Lus |
snmp npeViewLub Npe> [Hom] Kev piav qhia:
CommunityString: ViewLub npe: Hom: 1: Nyeem nkaus xwb, 2: Nyeem-Sau |
| snmp ua | Rho tawm Community String | snmp ua |
| snmp kev | Qhia Community String Table | snmp kev |
|
snmp addhost |
Ntxiv Lub Tswv Cuab Kom Ceeb Toom Sau Npe |
snmp addhost TrapHostIP [SnmpType] [AuthType]
Kev piav qhia: TrapHostIP: SnmpType: 1: v1 2: v2c 3: v3 AuthType: 0: v1_v2c 1: v3_noauth_nopriv 2: v3_auth_nopriv 3 v3_auth_priv> AuthString: , CommunityString rau v1, v2c lossis UserName rau: v3 |
| snmp ua | Rho tawm tus tswv ntawm Daim Ntawv Ceeb Toom | snmp ua |
| snmp showhost | Qhia tus tswv hauv daim ntawv ceeb toom | snmp showhost |
| snmp ua | Teem Auth Trap Status | snmp authtrap [pab: disable] |
| snmp xas | Xa Npua Kub | snmp xas |
| snmp xwm | Saib cov xwm txheej SNMP Tus Neeg Saib Xyuas | snmp xwm |
| snmp swb | Qhia qhov xwm txheej ntawm LBS | snmp swb |
| snmp lbsenable | Ua haujlwm ntawm LBS | snmp lbsenable |
| snmp lbsdisable | Disable ua haujlwm ntawm LBS | snmp lbsdisable |
|
snmp wb |
Teem LBS trap server ip |
snmp wb
yog lbs ntxiab server ip. |
| snmp showlbstrapsrv | Qhia LBS ntxiab server ip | snmp showlbstrapsrv |
| snmp tso | Tshem tawm SNMP Tus Neeg Saib Xyuas | snmp tso |
| snmp rov | Rov pib dua SNMP Agent | snmp rov |
| snmp load_default tau txais trapstate
teeb trapstate |
Load SNMP Default Settings Tau ntxiab server xeev
Teem lub cuab tam server |
snmp load_default tau txais trapstate
teeb trapstate [disable:enable] |
TIME DISPLAY & SNTP COMMANDS
| Hais kom ua: | Muaj nuj nqi | Syntax |
| sijhawm hnub | Qhia Lub Sij Hawm Tam Sim No ntawm Hnub | sijhawm hnub
Nco tseg: Yuav tsum tau teeb tsa SNTP / NTP server ua ntej |
| Tau Command | Muaj nuj nqi | Syntax |
| tau sntpserver | Tso saib SNTP/NTP Server IP Chaw Nyob | tau sntpserver |
| qib tzone | Zaub Sijhawm Thaj Chaw Teeb | qib tzone |
| Teeb Command | Muaj nuj nqi | Syntax |
| teeb sntpserver | Teem SNTP/NTP Server IP Chaw Nyob | teeb sntpserver Kev piav qhia: yog IP chaw nyob |
| set txo | Teem Sijhawm Thaj Chaw | set tzone [0=GMT] |
TELNET & SSH COMMANDS
| TFTP & FTP Commands: | ||
| Hais kom ua: | Muaj nuj nqi | Syntax |
| tftp qib | Tau ib file los ntawm TFTP Server. | tftp qib Filenpe |
| tftp uploadtxt | Upload lub configuration ntawm lub cuab yeej rau TFTP Server. | tftp uploadtxt Filenpe |
| tftp swb | Teem lub TFTP Server IP chaw nyob. | tftp swb |
| tftp hloov tshiab | Hloov kho cov file mus rau lub cuab yeej. | tftp hloov tshiab |
| tftp cov ntaub ntawv | Cov ntaub ntawv hais txog kev teeb tsa TFTPC. | tftp cov ntaub ntawv |
| tau telnet | Tso saib Telnet Status ntawm tus ID nkag mus tam sim no, tus lej ntawm kev sim nkag, thiab lwm yam. | tau telnet |
| tau lub sijhawm | Tso saib Telnet Timeout hauv vib nas this | tau lub sijhawm |
|
teeb telnet |
Teem Telnet Access / SSL Hom kom qhib lossis kaw |
teeb telnet <0:1:2> Piav:
0 = lov tes taw telnet thiab pab SSL 1 = pab telnet thiab lov tes taw SSL 2 = lov tes taw telnet thiab SSL |
| teem sij hawm ftp
ftpcon swb ftpcon downloadtxt ftpcon uploadtxt ssl srvip ssl usrpwd ssl ftpget ssl info |
Teem Telnet Timeout hauv vib nas this, 0 tsis yog thiab 900 vib nas this yog qhov siab tshaj <0-900>
Software Update TFP File Ntawm FTP Teem Lub FTP Server IP Chaw Nyob Hloov kho configure file Los ntawm FTP Server Teeb Lub File Thiab Upload rau Server hauv ntawv File Teem FTP Server IP Chaw Nyob Teem Tus Neeg Siv Lub Npe thiab Tus password rau nkag mus rau FTP Server Display File Los ntawm FTP Server Tso cov ntaub ntawv ntawm SSL |
teem sij hawm <0-900> ftp
ftpcon swb ftpcon downloadtxt ftpcon uploadtxt ssl swb ssl ua ssl ftp ua file> file> ssl cov ntaub ntawv |
| SSH cov lus txib | ||
| Hais kom ua: | Muaj nuj nqi | Syntax |
| ssh showuser | Qhia tus neeg siv SSH | ssh showuser |
| ssh loaddefault | Load SSH Default Setting | ssh loaddefault |
| ssh showalgorithm | Qhia SSH Algorithm | ssh showalgorithm |
|
ssh setalgorithm |
Teem SSH Algorithm |
ssh setalgorithm [0 -12] [enable/disable] Lus piav qhia:
Algorithm: 0: 3DES 1: AWS 128 2: AWS 192 3: AWS 256 4:Arcfour 5:Blowfish 6:Cast128 7:Twofish128 8:Twofish192 9:Twofish256 10:MD5 11: SHA1 12: Tus password) Example: 1. Disable 3DES algorithm txhawb ssh setalgorithm 0 lov tes taw |
SYSTEM LOG & SMTP Command
| SYSTEM LOG Commands | ||
| Tau Command | Muaj nuj nqi | Syntax |
| tau syslog | Tso cov ntaub ntawv Syslog | tau syslog |
| Teeb Command | Muaj nuj nqi | Syntax |
|
teeb syslog |
Teem sysLog teeb tsa |
teeb syslog remoteip teeb syslog remotestate [0: 1]
teeb syslog localstate [0: 1] teeb syslog tshem tag nrho Piav: 0=disable:1=enable |
| Log hais kom ua | Muaj nuj nqi | Syntax |
| pktLog | Zaub Pob Log | pktLog |
| SMTP cov lus txib | ||
| txib | Muaj nuj nqi | Syntax |
| smtp ua | SMTP Client Utility | smtp ua |
| Tau Command | Muaj nuj nqi | Syntax |
| tau smtplog | Tso saib SMTP Nrog Log Status | tau smtplog |
| tau smtpserver | Tso saib SMTP Server (IP lossis Lub Npe) | tau smtpserver |
| tau smtpsender | Tso saib tus account | tau smtpsender |
| tau smtprecipient | Tso tus neeg txais email chaw nyob | tau smtprecipient |
| Teeb Command | Muaj nuj nqi | Syntax |
| teeb smtplog teeb smtpserver
teeb smtpsender teem smtprecipient |
Teem SMTP Nrog Log Status Teeb SMTP Server
Teem tus Sender Account Teem tus neeg txais email chaw nyob |
teeb smtplog [0:1]
Nqe lus piav qhia: 0 = lov tes taw 1 = pab teeb tsa smtpserver teeb smtpsender teem smtprecipient |
THAWJ-TIME CONFIGURATION EXAMPLES
Cov nram qab no AP configuration examples yog muab los pab cov neeg siv thawj zaug pib. Cov neeg siv cov lus txib yog ua siab tawv kom siv tau yooj yim.
Ntau tus neeg siv yuav xav teem caij tus IP tshiab rau DWL-2700AP. Qhov no tseem yuav xav tau kev teeb tsa lub npog ntsej muag IP thiab qhov chaw nyob IP chaw nyob. Hauv qab no yog ib qho example nyob rau hauv uas AP lub neej ntawd IP chaw nyob ntawm 192.168.0.50 hloov mus rau 192.168.0.55
Thaum tus neeg siv tau txiav txim siab seb hom kev lees paub zoo tshaj plaws rau lawv lub wireless network, ua raws li cov lus qhia tsim nyog hauv qab no. Hauv qab no yog ib qho example nyob rau hauv uas authentication yog teem rau Qhib System.
Hauv qab no yog ib qho example nyob rau hauv uas authentication yog teem rau Shared-Key.
Hauv qab no yog ib qho example nyob rau hauv uas qhov authentication yog teem rau WPA-PSK.
Hauv qab no yog ib qho example nyob rau hauv uas qhov authentication yog teem rau WPA.
Thaum tus neeg siv tau teeb tsa AP rau lawv qhov kev txaus siab, lub cuab yeej yuav tsum tau rebooted kom txuag chaw.
Cov ntaub ntawv / Cov ntaub ntawv
 |
D-LINK DWL-2700AP Access Point Command Line Interface Reference [ua pdf] Tus neeg siv phau ntawv DWL-2700AP Access Point Command Line Interface Reference, DWL-2700AP, Access Point Command Line Interface Reference, Command Line Interface Reference, Interface Reference, Kev Qhia |