BAFANG DP C11 LCD Maxtix Zaub
Cov ntaub ntawv khoom
Lub DP C11.CAN yog ib qho khoom siv rau cov tsheb kauj vab hluav taws xob. Nws muab cov ntaub ntawv ntawm lub sijhawm tiag tiag txog lub roj teeb muaj peev xwm, qib kev txhawb nqa, nrawm, cov ntsiab lus mus ncig, thiab lwm yam. Cov zaub kuj tseem muaj lub teeb pom kev zoo thiab lub teeb taub hau kom pom kev zoo dua.
TSEEM CEEB
- Yog tias cov ntaub ntawv yuam kev los ntawm cov zaub tsis tuaj yeem raug kho raws li cov lus qhia, thov hu rau koj lub khw muag khoom.
- Cov khoom yog tsim los ua kom tsis muaj dej. Nws raug nquahu kom tsis txhob submerging cov zaub hauv qab dej.
- Tsis txhob ntxuav cov zaub nrog lub dav hlau dav hlau, lub tshuab nqus tsev siab los yog cov kav dej.
- Thov siv cov khoom no nrog kev saib xyuas.
- Tsis txhob siv cov thinners lossis lwm cov kuab tshuaj los ntxuav cov zaub. Cov tshuaj zoo li no tuaj yeem ua rau lub ntsej muag puas.
- Warranty tsis suav nrog vim hnav thiab siv li qub thiab kev laus.
INTRODUCTION OF DISPLAY
- Qauv: DP C11.CAN BUS
- Cov khoom siv hauv tsev yog PC thiab Acrylic, thiab cov khoom siv khawm yog ua los ntawm silicone.
- Daim ntawv cim npe yog raws li nram no:
Nco tseg: Thov khaws daim ntawv lo QR code txuas nrog rau cov zaub cable. Cov ntaub ntawv los ntawm Label yog siv rau kev hloov kho software tom qab.
KHOOM PLIG
Specifications
- • Ua haujlwm kub: -20 ℃ ~ 45 ℃
• Cia kub: -20 ℃ ~ 50 ℃
• Waterproof: IP65
• Cia chav av noo: 30% -70% RH
Muaj nuj nqi Tshajview
- Cov zaub ceev (nrog rau qhov ceev tshaj plaws thiab lub hnub nyoog nrawm, hloov ntawm km thiab mais)
- Roj teeb muaj peev xwm qhia tau
- Kev tswj teeb pom kev zoo
- Brightness teeb rau backlight
- Kev pab taug kev
- Kev qhia txog kev txhawb nqa kev ua haujlwm
- Motor output zog qhia
- Lub sij hawm tso saib rau ib qho kev mus ncig
- Kilometer sawv ntsug (nrog rau ib qho kev mus ncig tsis sib xws, tag nrho qhov kev ncua deb thiab seem nyob deb)
- Teeb tsa cov qib kev txhawb nqa
- Kev siv hluav taws xob ntsuas CALORIES
(Nco tseg: Yog tias cov zaub muaj qhov haujlwm no) - Tso rau qhov seem nyob deb (nyob ntawm koj txoj kev caij tsheb)
- Cov ntaub ntawv View ( roj teeb, maub los, HMI thiab sensor)
- Cov lus yuam kev view
DISPLAY
- Tso lub roj teeb muaj peev xwm hauv lub sijhawm.
- Txhawb nqa qib
- Cov zaub qhia cov cim no
, Thaum lub teeb ci. - Unit ceev
- Digital ceev zaub
- Kev mus ncig: Ib hnub mais (Tsib Tshav Dav Hlau) - Tag nrho cov kilometers
(ODO) – Sab saum toj ceev (MAX) – Nruab nrab ceev
(AVG) – Nyob nrug deb
(RANGE) - Kev siv hluav taws xob
(CALORIES) - Tso zis zog
(POWER)- Lub Sijhawm Mus Los (TSI).
Kev Pabcuam: Thov saib cov kev pabcuam
TSEEM CEEB
IB TUG NEEG
Hloov qhov System ON/OFF
Nias thiab tuav 
(> 2S) ntawm cov zaub kom qhib lub kaw lus. Nias thiab tuav (> 2S) dua los tua lub kaw lus. Yog tias "Lub Sijhawm kaw tsis siv neeg" tau teem rau 5 feeb (nws tuaj yeem rov pib dua nrog "Auto Off" muaj nuj nqi, Saib "Auto Off"), cov zaub yuav cia li kaw rau lub sijhawm xav tau thaum nws tsis ua haujlwm. Yog tias tus password ua haujlwm tau qhib, koj yuav tsum sau tus password kom raug siv lub kaw lus.
Xaiv Cov Qib Txhawb
Thaum lub vijtsam qhib, nias lub 
or
khawm (<0.5S) hloov mus rau qib kev txhawb nqa, qib qis tshaj yog 0, qib siab tshaj plaws yog 5. Thaum lub kaw lus hloov mus, qhov kev txhawb nqa pib hauv qib 1. Tsis muaj kev txhawb nqa ntawm qib 0. Rau qhov sib txawv pab theem thov saib tshooj “Assist Mode”.
Xaiv hom
Luv luv nias lub khawm (<0.5s) kom pom ntau hom kev mus txawv tebchaws.
Trip: mais txhua hnub (Tshem Tawm) – tag nrho cov kilometers (ODO) – Qhov siab tshaj plaws (MAX) – Qhov nruab nrab ceev (AVG)
- Kev ncua deb (RANGE) - Kev siv hluav taws xob (CALORIES) - tso zis hluav taws xob (POWER) - Lub sijhawm mus ncig (SIJ HAWM).
Headlights / backlighting
- Tuav lub khawm (> 2S) kom qhib lub teeb taub hau thiab lub teeb taillights.
- Tuav lub khawm (> 2S) dua los tua lub teeb taub hau. Qhov ci ntsa iab ntawm lub teeb pom kev tuaj yeem teeb tsa hauv qhov chaw teeb tsa "Brightness".
Taug kev pab
Kev pab taug kev tsuas yog qhib tau nrog lub pedelec sawv ntsug.
Qhib qhib: Nias lub khawm kom txog thaum lub cim no 
tshwm. Tom ntej no nias thiab tuav cia khawm thaum lub cim tau tshwm sim, tam sim no Kev Pabcuam Taug Kev yuav qhib. Lub cim yuav ntsais thiab lub pedelec txav approx. 5 km / h. Tom qab tso lub khawm, lub cev muaj zog nres thiab hloov rov qab mus rau qib 0.
Kev Pabcuam
Cov zaub qhia tau hais tias "SERVICE" sai li sai tau thaum muaj qee tus lej ntawm mais lossis cov nqi roj teeb tau mus txog. Nrog ib mais deb ntawm ntau tshaj 5000 km (los yog 100 lub voj voog them), "SERVICE" muaj nuj nqi tshwm rau ntawm cov zaub. Txhua 5000 km cov zaub "SERVICE" yuav tshwm sim txhua lub sijhawm. Qhov kev ua haujlwm no tuaj yeem teeb tsa hauv qhov chaw teeb tsa.
Roj teeb muaj peev xwm qhia tau
Lub peev xwm roj teeb tau pom nyob rau sab laug sab saum toj ntawm cov zaub. Txhua qhov bar tag nrho sawv cev rau lub peev xwm ntxiv ntawm lub roj teeb hauv ib percentage.
(raws li qhia hauv daim duab hauv qab no):
SETTINGS
Tom qab cov zaub qhib, nias thiab tuav cov thiab cov nyees khawm (nyob rau tib lub sijhawm) nkag mus rau hauv cov ntawv qhia zaub mov, Los ntawm nias lub or khawm (<0.5S), koj tuaj yeem ua qhov tseem ceeb thiab xaiv qhov chaw teeb tsa, Cov Ntaub Ntawv lossis Tawm. Ces nias lub khawm (<0.5S) kom paub meej tias koj xaiv qhov kev xaiv. Los yog tseem ceeb "EXIT" thiab nias lub khawm (<0.5S) rov qab mus rau cov ntawv qhia zaub mov tseem ceeb, lossis tseem ceeb "BACK" thiab nias (<0.5S) lub khawm (<0.5S) rov qab mus rau qhov chaw interface.
“Display Setting”
Nias lub or khawm (<0.5S) thiab taw qhia zaub teeb, thiab tom qab ntawd luv luv nias lub khawm (<0.5S) nkag mus rau cov kev xaiv hauv qab no.
- "TRIP Reset" Rov pib dua mileage
Nias lub or khawm (<0.5S) los qhia "Trip Reset" hauv cov zaub mov teeb tsa, thiab tom qab ntawd nias khawm (<0.5S) xaiv. Tom qab ntawd nrog cov or khawm xaiv ntawm "YES" lossis "NO". Thaum koj tau xaiv qhov koj xav xaiv, nias lub khawm (<0.5S) txuag thiab tawm mus rau "Display chaw".
- "Unit" Xaiv nyob rau hauv km / mais
Nias lub or khawm (<0.5S) kom pom qhov "Unit" hauv cov zaub mov teeb tsa, thiab tom qab ntawd nias khawm (<0.5S) xaiv. Tom qab ntawd nrog cov or khawm xaiv ntawm "Metric" (kilometer) lossis "Imperial" (Mail). Thaum koj tau xaiv qhov koj xav xaiv, nias lub khawm (<0.5S) txuag thiab tawm mus rau "Display chaw".
- "Brightness" Zaub brightness
Nias lub or khawm (<0.5S) txhawm rau txhawm rau "Brightness" hauv cov zaub mov teeb tsa, thiab tom qab ntawd nias khawm (<0.5S) xaiv. Tom qab ntawd nrog cov or khawm xaiv ntawm "100%" / "75%" / "50%" / "30%" / "10%". Thaum koj tau xaiv qhov koj xav xaiv, nias lub khawm (<0.5S) txuag thiab tawm mus rau "Display chaw".
- "Auto Off" Teem lub kaw lus tsis siv neeg hloov lub sijhawm
Nias lub or khawm (<0.5S) txhawm rau taw qhia "Auto Off" hauv cov ntawv qhia zaub mov, thiab tom qab ntawd nias khawm (<0.5S) xaiv. Tom qab ntawd nrog cov or khawm xaiv ntawm “OFF”, “9”/”8”/”7”/”6”/ “5”/ “4”/”3”/”2”/”1″, (Cov lej ntsuas hauv feeb ). Thaum koj tau xaiv qhov koj xav xaiv, nias lub khawm (<0.5S) txuag thiab tawm mus rau "Display chaw".
- "Assist Mode" Teem kev txhawb nqa qib
Nias lub or khawm (<0.5S) kom pom qhov "Max Pass" hauv cov ntawv qhia zaub mov, thiab tom qab ntawd nias khawm (<0.5S) xaiv. Tom qab ntawd nrog cov or khawm xaiv ntawm "3/5/9" (tus nqi txhawb nqa qib). Thaum koj tau xaiv qhov koj xav xaiv, nias lub khawm (<0.5S) txuag thiab tawm mus rau "Display chaw".
- “Kev Pabcuam” Hloov cov ntawv ceeb toom rau thiab tawm
Nias lub or khawm (<0.5S) kom pom qhov "Kev Pabcuam" hauv cov zaub mov teeb tsa, thiab tom qab ntawd nias khawm (<0.5S) xaiv. Tom qab ntawd nrog cov or khawm xaiv ntawm "NO" lossis "YES". Thaum koj tau xaiv qhov koj xav xaiv, nias lub khawm (<0.5S) txuag thiab tawm mus rau "Display chaw".
“Cov ntaub ntawv”
Thaum cov zaub qhib, nias thiab tuav lub thiab cov nyees khawm (nyob rau tib lub sijhawm) nkag mus rau hauv cov ntawv qhia zaub mov, nias lub or khawm (<0.5S) xaiv "Information", ces nias lub khawm (<0.5S) kom paub meej thiab nkag mus rau hauv "Cov ntaub ntawv".
- Log Loj
Nias lub or khawm (<0.5S) kom pom qhov "Los Loj", tom qab ntawd nias lub khawm (<0.5S) kom paub meej thiab view lub log loj. Txhawm rau rov qab, nias lub khawm (<0.5S) tawm rov qab mus rau "Cov Ntaub Ntawv". Cov ntaub ntawv no tsis tuaj yeem hloov pauv, qhov no tsuas yog rau cov ntaub ntawv, hais txog pedelec.
- Ceev txwv
Nias lub or khawm (<0.5S) kom pom qhov "Speed Limit", ces nias lub khawm (<0.5S) kom paub meej thiab view qhov txwv ceev. Txhawm rau rov qab, nias lub khawm (<0.5S) tawm rov qab mus rau "Cov Ntaub Ntawv". Cov ntaub ntawv no tsis tuaj yeem hloov pauv, qhov no tsuas yog rau cov ntaub ntawv, hais txog pedelec.
- Cov ntaub ntawv roj teeb
Code Code txhais chav tsev Code Code txhais chav tsev Hardware ver Kho vajtse version b10 ua Absolute SOC % Software ver Software version b11 ua Lub voj voog sij hawm b01 ua
Tam sim no kub
℃
b12 ua
Qhov siab tshaj plaws tsis them lub sijhawm Teev
b04 ua
Total voltage
mV
b13 ua
Tsis ntev los no tsis tau them nqi Teev
b06 ua
Nruab nrab tam sim no
mA
d 00 ua
Tus naj npawb ntawm cov roj teeb ntawm tes b07 ua Tseem muaj peev xwm mAh d 01 ua Voltage cev 1 mV b08 ua Lub peev xwm them tag nrho mAh d 02 ua Voltage cev 2 mV b09 ua kwv tij SOC % dn Voltage cev n mV Nias lub
or khawm (<0.5S) txhawm rau txhawm rau "Cov Ntaub Ntawv Roj Teeb", tom qab ntawd nias lub khawm (<0.5S) kom paub meej. Tam sim no nias lub or khawm (<0.5S) rau view cov ntsiab lus. Txhawm rau rov qab, nias lub khawm (<0.5S) tawm rov qab mus rau "Cov Ntaub Ntawv". - Cov Ntaub Ntawv Tswj
Nias lub or khawm (<0.5S) txhawm rau txhawm rau "Ctrl Info", tom qab ntawd nias lub khawm (<0.5S) kom paub meej. Tam sim no nias lub khawm (<0.5S) rau view Hardware Version lossis Software Version. Txhawm rau rov qab, nias lub khawm (<0.5S) tawm rov qab mus rau "Cov Ntaub Ntawv".
- Qhia ntaub ntawv
Nias lub or khawm (<0.5S) kom pom cov ntaub ntawv "Display", ces nias lub khawm (<0.5S) kom paub meej. Tam sim no nias lub or khawm (<0.5S) rau view Hardware Version lossis Software Version. Txhawm rau rov qab, nias lub khawm (<0.5S) tawm rov qab mus rau "Cov Ntaub Ntawv".
- Cov ntaub ntawv Torque
Nias lub or khawm (<0.5S) los qhia txog "Torque Info", tom qab ntawd nias lub khawm (<0.5S) kom paub meej. Tam sim no nias lub or khawm (<0.5S) rau view Hardware Version lossis Software Version. Txhawm rau rov qab, nias lub khawm (<0.5S) tawm rov qab mus rau "Cov Ntaub Ntawv".
- yuam kev Code
Nias lub or khawm (<0.5S) txhawm rau txhawm rau hais tias "Yuam kev cai", tom qab ntawd nias lub khawm (<0.5S) kom paub meej. Tam sim no nias lub or khawm (<0.5S) rau view ib daim ntawv teev cov lej yuam kev los ntawm pedelec. Nws tuaj yeem qhia cov ntaub ntawv rau kaum qhov yuam kev kawg ntawm pedelec. Qhov yuam kev code “00” txhais tau hais tias tsis muaj qhov yuam kev. Txhawm rau rov qab, nias lub khawm (<0.5S) tawm rov qab mus rau "Cov Ntaub Ntawv".
YUS CODE DEFINITION
Cov zaub tuaj yeem qhia qhov yuam kev ntawm lub pedelec. Yog tias pom qhov yuam kev, ib qho ntawm cov lej yuam kev hauv qab no yuav tshwm sim.
Nco tseg: Thov nyeem cov lus piav qhia ntawm qhov yuam kev code kom zoo zoo. Yog tias koj pom tus lej yuam kev, rov pib lub kaw lus ua ntej. Yog tias qhov teeb meem daws tsis tau, thov hu rau koj tus neeg muag khoom.
| yuam kev | Tshaj tawm | Kev daws teeb meem |
| 04 | Lub throttle muaj txhaum. | 1. Tshawb xyuas lub connector ntawm lub throttle seb lawv puas raug txuas.
2. Disconnect lub throttle, Yog hais tias qhov teeb meem tseem tshwm sim, thov hu rau koj lub khw muag khoom. (tsuas yog nrog cov haujlwm no) |
| 05 | Lub throttle tsis rov qab rau hauv nws txoj haujlwm raug. | Txheeb xyuas lub throttle tuaj yeem hloov kho rov qab rau hauv nws txoj haujlwm raug, yog tias qhov xwm txheej tsis zoo, thov hloov mus rau lub tshuab nqus tsev tshiab.(tsuas yog nrog txoj haujlwm no) |
| 07 | Overvoltage kev tiv thaiv | 1. Tshem lub roj teeb.
2. Rov ntxig lub roj teeb. 3. Yog tias muaj teeb meem tshwm sim, thov hu rau koj lub khw muag khoom. |
| 08 | Kev ua yuam kev nrog lub teeb pom kev hauv tsev hauv lub cev muaj zog | Thov hu rau koj lub khw muag khoom. |
| 09 | Yuam kev nrog lub cav theem | Thov hu rau koj lub khw muag khoom. |
| 10 | Qhov kub hauv lub cav tau mus txog nws qhov kev tiv thaiv siab tshaj plaws | 1. Tua lub kaw lus thiab cia lub Pedelec txias.
2. Yog tias muaj teeb meem tshwm sim, thov hu rau koj lub khw muag khoom. |
| 11 | Qhov ntsuas kub ntsuas hauv lub cev muaj qhov yuam kev | Thov hu rau koj lub khw muag khoom. |
| 12 | Yuam kev nrog lub sensor tam sim no hauv tus maub los | Thov hu rau koj lub khw muag khoom. |
| 13 | Yuam kev nrog lub ntsuas kub ntsuas hauv lub roj teeb | Thov hu rau koj lub khw muag khoom. |
| yuam kev | Tshaj tawm | Kev daws teeb meem |
| 14 | Qhov kev tiv thaiv kub hauv lub maub los tau mus txog nws qhov kev tiv thaiv siab tshaj plaws | 1. Tua lub kaw lus thiab cia lub pedelec txias.
2. Yog tias muaj teeb meem tshwm sim, thov hu rau koj lub khw muag khoom. |
| 15 | Kev ua yuam kev nrog lub ntsuas kub ntsuas hauv lub maub los | Thov hu rau koj lub khw muag khoom. |
| 21 | Ceev sensor yuam kev | 1. Rov pib dua qhov system
2. Txheeb xyuas tias cov hlau nplaum txuas nrog cov lus hais tau ua raws li qhov ntsuas nrawm thiab qhov kev ncua deb ntawm 10 hli thiab 20 hli. 3. Txheeb xyuas tias qhov ceev sensor txuas txuas raug raug. 4. Yog tias qhov ua yuam kev tseem muaj, thov hu rau koj lub khw muag khoom. |
| 25 | Torque teeb liab yuam kev | 1. Txheeb xyuas tias txhua qhov kev sib txuas tau txuas raug raug.
2. Yog tias qhov ua yuam kev tseem muaj, thov hu rau koj lub khw muag khoom. |
| 26 | Lub teeb liab ceev ntawm lub torque sensor muaj qhov yuam kev | 1. Tshawb xyuas lub connector los ntawm lub sensor ceev kom paub tseeb tias nws txuas raug raug.
2. Txheeb xyuas qhov ntsuas ceev kom pom cov cim kev puas tsuaj. 3. Yog tias muaj teeb meem tshwm sim, thov hu rau koj lub khw muag khoom. |
| 27 | Overcurrent los ntawm maub los | Thov hu rau koj lub khw muag khoom. |
| 30 | Kev sib txuas lus teeb meem | 1. Xyuas tag nrho cov kev sib txuas yog raug txuas.
2. Yog tias qhov ua yuam kev tseem muaj, thov hu rau koj lub khw muag khoom. |
| 33 | Nres teeb liab muaj qhov yuam kev (Yog tias nres sensors haum) | 1. Xyuas tag nrho cov connectors.
2. Yog hais tias qhov yuam kev tseem tshwm sim, thov hu rau koj lub khw muag khoom. |
| yuam kev | Tshaj tawm | Kev daws teeb meem |
| 35 | Kev kuaj xyuas Circuit Court rau 15V muaj qhov yuam kev | Thov hu rau koj lub khw muag khoom. |
| 36 | Kev kuaj xyuas Circuit Court ntawm lub keypad muaj qhov yuam kev | Thov hu rau koj lub khw muag khoom. |
| 37 | WDT Circuit Court yog faulty | Thov hu rau koj lub khw muag khoom. |
| 41 | Total voltage los ntawm lub roj teeb siab dhau lawm | Thov hu rau koj lub khw muag khoom. |
| 42 | Total voltage los ntawm lub roj teeb tsawg dhau | Thov hu rau koj lub khw muag khoom. |
| 43 | Tag nrho lub zog los ntawm cov roj teeb hlwb siab dhau lawm | Thov hu rau koj lub khw muag khoom. |
| 44 | Voltage ntawm ib leeg xwb siab dhau lawm | Thov hu rau koj lub khw muag khoom. |
| 45 | Kub los ntawm lub roj teeb siab dhau lawm | Thov hu rau koj lub khw muag khoom. |
| 46 | Qhov kub ntawm lub roj teeb qis dhau lawm | Thov hu rau koj lub khw muag khoom. |
| 47 | SOC ntawm lub roj teeb siab dhau lawm | Thov hu rau koj lub khw muag khoom. |
| 48 | SOC ntawm lub roj teeb tsawg dhau lawm | Thov hu rau koj lub khw muag khoom. |
| 61 | Switching detection defect | Thov hu rau koj lub khw muag khoom. (tsuas yog nrog cov haujlwm no) |
| 62 | Electronic derailleur tsis tuaj yeem tso tawm. | Thov hu rau koj lub khw muag khoom. (tsuas yog nrog cov haujlwm no) |
| 71 | Electronic xauv yog jammed | Thov hu rau koj lub khw muag khoom. (tsuas yog nrog cov haujlwm no) |
| 81 | Bluetooth module muaj qhov yuam kev | Thov hu rau koj lub khw muag khoom. (tsuas yog nrog cov haujlwm no) |
Cov ntaub ntawv / Cov ntaub ntawv
 |
BAFANG DP C11 LCD Maxtix Zaub [ua pdf] Tus neeg siv phau ntawv DP C11 LCD Maxtix Zaub, DP C11, LCD Maxtix Zaub, Maxtix Zaub, Zaub |