Altronix TANGO8P PoE Tsav ntau qhov tso zis hluav taws xob nrog Lithium roj teeb thaub qab

Cov ntaub ntawv khoom

Specifications

• Fais fab mov Model: Tango8P (CB)
• Cov lus qhia Voltage: IEEE 802.3bt PoE
• Tso zis Voltage12VDC thiab / lossis 24VDC
• Cov zis siab tshaj plawshwj chim: 75W
• Number of Outputs: 8
• Fuse / PTC Kev Ntsuas: Fuse tiv thaiv cov zis rau Tango8P, Chav Kawm 2 lub zog txwv PTC tiv thaiv tawm rau Tango8PCB
• Roj teeb Charger: Built-in Lithium Iron Phosphate Battery Charger

Tshajview

Lub Altronix Tango8P(CB) PoE Tsav Multi-Output Power Supply yog tsim los hloov IEEE802.3bt PoE cov tswv yim rau hauv yim tswj 24VDC thiab/lossis 12VDC outputs nrog lub zog siab tshaj plaws ntawm 75W. Qhov no fais fab mov tshem tawm qhov xav tau rau siab voltage nyob rau hauv lub thawv thiab muaj peev xwm txhawb nqa ib qho 12V LiFePO4 (Lithium Iron Phosphate) roj teeb rau thaub qab.

Cov lus qhia installation:

1. Mount lub tsev nyob rau hauv qhov chaw uas xav tau siv cov keyholes muab.
2. Khaws lub qhov rooj rau lub ntiaj teb hauv av.
3. Txuas lub IEEE802.3bt PSE los ntawm PoE qhov chaw mus rau RJ45 Jack cim [PoE + Cov ntaub ntawv nkag] ntawm Tango1B pawg thawj coj saib. Yog xav tau cov ntaub ntawv hla dhau, txuas lwm IEEE802.3bt PSE rau RJ45 Jack cim [Cov ntaub ntawv tso tawm].
4. Teem txhua qhov tso zis [OUT1 – OUT8] mus rau lub zog los ntawm cov tswv yim 1 lossis Cov Lus Nug 2 siv lub jumper txoj hauj lwm 1 lossis 2.

FAQ

• Tango8P(CB) fais fab mov puas tuaj yeem siv sab nraum zoov?
  • Tsis yog, cov khoom yog npaj rau kev siv sab hauv tsev nkaus xwb.
• Lub zog tso zis siab tshaj plaws ntawm Tango8P (CB) fais fab mov yog dab tsi?
  • Lub zog tso zis siab tshaj plaws yog 75W.
• Lub roj teeb hom twg yog Tango8P (CB) lub zog them nyiaj yug rau thaub qab?
  • Lub Tango8P(CB) fais fab mov yog tsim los txhawb ib 12V LiFePO4 (Lithium Iron Phosphate) roj teeb rau thaub qab.
• Tango8P (CB) fais fab mov muaj pes tsawg qhov tso zis?
  • Lub Tango8P (CB) fais fab mov muaj yim outputs.

Tshajview

Altronix Tango8P(CB) PoE Driven Multi-Output Power Supply converts IEEE802.3bt PoE input rau yim (8) tswj 24VDC thiab/los yog 12VDC outputs mus txog 75W. Nws tshem tawm qhov xav tau rau lub siab voltage nyob rau hauv lub enclosure. Tango8P(CB) yog tsim los txhawb ib qho 12V LiFePO4 (Lithium Iron Phosphate) roj teeb rau 12VDC thiab 24VDC thaub qab.

Specifications

Ethernet Input:

• 802.3bt PoE mus txog 90W lossis 802.3at txog 30W lossis 802.3af txog 15W.
• Fais fab tso zis (thaum siv 802.3bt 90W):
• 12VDC txog 6.25A (75W) thiab / lossis 24VDC txog 3A (75W). Combined tso zis tsis pub tshaj 75W.
• Thaum them cov roj teeb: 12VDC mus txog 5.4A (65W) thiab/los yog 24VDC mus txog 2.7A (65W) Combined tso zis tsis pub tshaj 65W.
• Tango 8 P: Fuse-protected outputs rated @ 3A ib qhov tso zis, tsis muaj hwj chim txwv.
• Tango 8 PCB: PTC-protected outputs rated @ 2A per output, Class 2 power-limited.
• Ib qho ntawm yim (8) fuse / PTC-tiv thaiv hluav taws xob tso tawm yog xaiv tau los ua raws li lub hwj chim Input 1 lossis Input 2. Cov zis voltage ntawm txhua qhov tso zis yog tib yam li cov tswv yim voltage ntawm cov tswv yim xaiv.
• Cov txiaj ntsig ntawm tus kheej tuaj yeem raug teeb tsa rau OFF txoj haujlwm rau kev pabcuam.
• Surge suppression.

Fuse / PTC Kev Ntsuas:

• Main input fuses ntsuas @ 10A / 32V txhua.
• PDS 8: tso zis fuses ntsuas @ 3A / 32V txhua.
• PDS 8 CB: tso zis PTCs ntsuas @ 2A txhua.
• TUG 1BRoj teeb fuse ntsuas @ 10A / 32V txhua.

Ethernet tso zis (Tango1B):

• Nkag mus los ntawm Ethernet Chaw nres nkoj (cov ntaub ntawv nkaus xwb).
• 100/1 G.

Roj teeb (Tango1B):

• 12VDC roj teeb charger rau Lithium Iron Phosphate Battery (LiFeP04 nkaus xwb).

Roj teeb (cont'd) (Tango1B):

• Cov cuab yeej tshwj xeeb tso cai rau ib lub roj teeb rau thaub qab 12VDC thiab / lossis 24VDC systems.
• Tsawg zog kaw. shuts down DC output terminals yog roj teeb voltage poob qis dua 80% ntawm nominal. Tiv thaiv kom tsis txhob sib sib zog nqus roj teeb.

Kev saib xyuas:

• Poob ntawm PoE Input.
• Kev saib xyuas roj teeb.

Visual Indicators:

• Tango 1B
  • Input qhia input voltage yog tam.
  • Cov xwm txheej roj teeb qhia tias muaj teeb meem roj teeb.
  • PoE Class qhia.
  • Saib xyuas PoE Fail lossis BAT Fail.
• PDS8 (CB)
  • Tus kheej voltage LEDs qhia 12VDC (ntsuab) lossis 24VDC (ntsuab thiab liab).
• Ib puag ncig:
  • Ua haujlwm kubKub: 0ºC txog 49ºC ambient.
  • Cov av noo20-85%, tsis-condensing.
• Enclosure Dimensions (kwv yees H x W x D):
  • 15.5 "x 12.25" x 4.5" (394mm x 311mm x 114mm).
• Accessories:
  Cov Khoom Siv Hluav Taws Xob
• NetWay1BT - Ib Qhov Chaw Tswj Xyuas Hi-PoE Injector muab 90W tag nrho lub zog.
• NetWaySP1BT - 802.3bt Media Converter / Injector muab 90W tag nrho lub zog.
• NetWay4BT - 4-Port Managed Hi-PoE Midspan Injector muab 480W tag nrho lub zog.
• NetWay8BT - 8-Port Managed Hi-PoE Midspan Injector muab 480W tag nrho lub zog.

Stand-by Specifications:

Cov lus qhia installation

Txoj kev xaim yuav tsum ua raws li National Electrical Code/NFPA 70/NFPA 72/ANSI, Canadian Electrical Code thiab nrog rau tag nrho cov cai hauv zos thiab cov tub ceev xwm muaj cai txiav txim. Cov khoom yog npaj rau kev siv sab hauv tsev nkaus xwb.

1. Mount lub tsev nyob rau hauv qhov chaw uas xav tau. Kos thiab predrill qhov nyob rau hauv phab ntsa kom kab nrog rau sab saum toj ob keyhoes nyob rau hauv lub enclosure. Nruab ob sab saum toj fasteners thiab screws nyob rau hauv phab ntsa nrog cov ntsia hlau taub hau protruding. Muab lub qhov rooj xauv lub qhov tseem ceeb ntawm ob sab saum toj, theem thiab ruaj ntseg. Kos txoj hauj lwm ntawm ob lub qhov qis. Tshem tawm qhov thaiv. Laum lub qhov hauv qab thiab nruab ob lub fasteners. Muab lub qhov rooj ntawm lub qhov rooj sab sauv rau ntawm ob lub qhov rooj sab saud. Txhim kho ob lub hauv qab screws thiab xyuas kom nruj tag nrho cov ntsia hlau (Enclosure Dimensions, pg. 8). Ruaj ntseg lub enclosure rau hauv av.

1. Xyuas kom txhua qhov tso zis jumpers [OUT1 – OUT8] ntawm PDS8(CB) raug muab tso rau hauv daim duab 1 OFF (center) txoj hauj lwm cim [•] (Fig. 1, ).
2. Txuas IEEE802.3bt PSE los ntawm PoE qhov chaw rau RJ45 Jack cim [PoE + Cov ntaub ntawv nkag] ntawm Tango1B board (Fig. 2b, ). Yog xav tau cov ntaub ntawv hla dhau, txuas lwm IEEE802.3bt PSE rau RJ45 Jack cim [Data Output] (Fig. 2a, pg. 4).
   • CEEB TOOM: Tsis txhob kov cov hlau raug.
     Tsis muaj cov neeg siv-kev pabcuam hauv. Xa mus rau kev teeb tsa thiab kev pabcuam rau cov neeg ua haujlwm tsim nyog.
3. Teem txhua qhov tso zis [OUT1 – OUT8] mus rau txoj kev fais fab ntawm Input 1 lossis Input 2 (jumper txoj hauj lwm 1 lossis 2)
   (Daim duab 1, 2, pg. 4, daim duab 3 p. 6). IN1 = 24VDC, IN2 = 12VDC.
4. Nco tseg: Ntsuas cov zis voltage ua ntej txuas cov khoom siv. Qhov no yuav pab kom tsis txhob muaj kev puas tsuaj.
5. Txuas cov khoom siv rau lub davhlau ya nyob twg khub 1 txog 8, cim [P (Positive) – OUT1-OUT8, N (Tsis zoo)] (Fig. 2, pg. 4, Fig. 3).
   • 6. Thaum siv cov roj teeb uas xav tau, lawv yuav tsum yog Lithium Iron Phosphate (LiFePO4). Txuas cov roj teeb rau lub davhlau ya nyob twg uas cim [+ BAT -] ntawm Tango1B (cov roj teeb coj nrog) (Fig. 2f, pg. 4).
6. Txuas cov khoom siv ceeb toom tsim nyog rau cov khoom siv hluav taws xob uas cim [C FAIL NC] (Fig. 2c,) kev saib xyuas relay tso tawm.

LED Diagnostics

Tango 1B

PDS 8

Enclosure Dimensions

Altronix tsis yog lub luag haujlwm rau txhua qhov yuam kev typographical.

140 58th Street, Brooklyn, New York 11220 USA |

• xov tooj: 718-567-8181 Ib |
• fax: 718-567-9056 Ib
• webqhov chaw: www.altronix.com |
• e-mail: yog info@altronix.com |
• Lub neej Warranty |

Ua hauv Asmeskas

Cov ntaub ntawv / Cov ntaub ntawv

Altronix TANGO8P PoE Tsav ntau qhov tso zis hluav taws xob nrog Lithium roj teeb thaub qab [ua pdf] Daim ntawv qhia kev teeb tsa TANGO8P PoE Tsav ntau qhov tso zis hluav taws xob nrog lithium roj teeb thaub qab, TANGO8P, PoE Tsav ntau cov zis hluav taws xob nrog lithium roj teeb thaub qab, Ntau qhov tso zis hluav taws xob nrog lithium roj teeb thaub qab, tso zis hluav taws xob nrog lithium roj teeb thaub qab, Lithium roj teeb thaub qab

Cov ntaub ntawv

• Cov neeg siv phau ntawv