Smart remote controller
User Manual
M423-7Ever1.0
HS1RC-TY Smart Remote Controller
* Please read the user manual carefully before operation.
The guide picture is for reference only. please in kind prevail.
Product Details
Product Introduction
This is a smart remote controller, which can take home protection when going out. It has small fashionable design.
Adopts super low power consumption Zigbee wireless networking design, support timely .reporting and reminding if low power of battery, makes a longer batterylife span.
Specification
1.Working Voltage: DC3V (1*CR2032 button battery)
2.Networking: Zigbee
3.Wireless Networking Distance: <100m(open area)
4.Working Temperature: -10°C~+50°C
5.Working Humidity: <95%RH
6.Dimension: 57.5*34.5*13mm
Step 1
- Remove battery insulation film to power on
Step 2
- According to APP prompt, press the button for 2 seconds, green LED flash quickly, APP Interface prompted, networking success. (Press networking hole for 5 seconds if any changes for internet, green LED flash slowly for 3 seconds, exit network successfully.
Battery Replacement
- Please change battery correctly based on the positive and negative terminals of the battery. Pay attention to the environment protection, please deal with the waste battery correctly.
Notes:
- The pictures shown are for reference only.
- As the technology is constantly updated, if actual operation is inconsistent with the user manual, the final interpretation rights is reserved to the manufacturer.
Documents / Resources
 |
Heiman HS1RC-TY Smart Remote Controller [pdf] User Manual HS1RC-E, HS1RC-TY, HS1RC-TY Smart Remote Controller, HS1RC-TY, Smart Remote Controller, Remote Controller, HS1RC-TY Controller |