Heckler H1011 Device Shelf
In The Box
- a. Felt Panel Set. 1 x Large Panel (F241) and 2 x Small Panels (F242).
- b. Device Shelf for Heckler Confidence Stand. Column (R1024-BK) and Shelf (R1025-BK).
- c. Velcro Strap (F856)
Fasten The Column To The Shelf
Align the metal tab on the bottom of the column with the cutout on the shelf.
Either orientation is fine.
Tighten the thumbscrew from the bottom of shelf.
Install The Shelf To The Stand
Verify both spring buttons have engaged with the beam.
Position the shelf as shown to ensure correct panel installation.
Install Panels
Push the metal tabs on the shelf into the slots on the rigid felt panels.
You can mount your gear before or after you have installed the shelf to Heckler Confidence Stand.
Documents / Resources
 |
Heckler H1011 Device Shelf [pdf] User Guide H1011 Device Shelf, H1011, Device Shelf, Shelf |
