HEADRUSH VX5 Vocal Processing Pedal User Guide

HEADRUSH-LOGO

HEADRUSH VX5 Vocal Processing Pedal

HEADRUSH-VX5-Vocal-Processing-Pedal-PRODUCT-removebg-preview

 Introduction

 Box Contents 

  • AutoTune VX5
  • USB Cable
  • Power Cable
  • Quickstart Guide
  • Safety & Warranty Manual

 Support
For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit headrushfx.com. For additional product support, visit support.headrushfx.com.

 Setup

Note: For best results, use AutoTune on only one singer.

  1. Press the Preset button. Rotate the encoder and then push the encoder to select a preset that closely matches your incoming source audio.
  2. Press the Key button and turn the Preset/Edit encoder to set the Key, Scale, and Range for the singer.
  3. Press the AutoTune button to turn on the AutoTune feature.
  4. Adjust the Speed knob. A slower setting gives a more natural sounding pitch correction while a faster setting gives a more noticeable effect.
  5. Adjust the Humanize knob to add more or less natural sounding pitch correction on sustained notes.
  6. Press the Harmony button to turn the effect on, indicated by the button back light. Press the Harmony or FX button to turn on the respective feature. Then press and hold the respective button again to enter the menu. You can also select the “Inst.” setting to use the guitar input to determine the key and scale.
  7. Press the FX button to turn the effect on, indicated by the button’s back light. Press and hold the FX button, then turn the Preset/Edit encoder to adjust parameters to create your own signature sound.

HEADRUSH-VX5-Vocal-Processing-Pedal- (1) HEADRUSH-VX5-Vocal-Processing-Pedal- (2) HEADRUSH-VX5-Vocal-Processing-Pedal- (3)

When you are finished using AutoTune VX5 and ready to shut it down, power off your connected output devices first, and then power off AutoTune VX5.

 Connection Diagram
Items not listed under (1.1) Introduction > Box Contents are sold separately.

HEADRUSH-VX5-Vocal-Processing-Pedal- (4)

 Features

Top Panel 

HEADRUSH-VX5-Vocal-Processing-Pedal- (5)

  • A. Display
    Use this 1.8” color screen to view menus and edit parameters. Press the Key button to enter the menu on the display. Press and hold the Harmony or FX buttons to enter these menus on the display.
  • B. Volume
    Adjusts the level of the Main and Phones Outputs.
  • C. Preset/Edit
    Turn this encoder to adjust parameters, press to enter/exit menus, and hold to save a preset. The last selected preset will be retained when the power is cycled off and on. HEADRUSH-VX5-Vocal-Processing-Pedal- (6)
  • D. Speed
    Turn this knob to adjust how rapidly pitch correction is applied to incoming audio. For a more noticeable effect, set this towards the “Fast” side. For a more natural sounding pitch correction, set this towards the “Slow” side. See the (4.3) Speed section for more details.
  • E. Humanize
    Turn this knob to the right to add realism to sustained notes by preserving subtle variations in pitch. Turn the knob to the left to minimize the natural sounding pitch correction, enabling settings that resemble the classic “robotic” AutoTune effect. See the (4.4) Humanize section for more details.
  • F. Preset Down / A/B Mode
    Press to switch to the previous preset. Press and hold for two seconds to enter A/B mode to use the left and right footswitches to turn the selected effect on or off within a preset. Press and hold this footswitch to exit A/B mode. See the (4.9) Footswitch Menu section for more details.
  • G. Preset Up / Talk Mode
    Press to switch to the next preset. Press and hold for two seconds to activate Talk mode and bypass the AutoTune, Harmony, and FX features without any effects applied to your vocals. Press either footswitch to exit Talk mode. See the (4.9) Footswitch Menu section for more details. HEADRUSH-VX5-Vocal-Processing-Pedal- (7)
  • H. Peak LED
    This LED will flash red if the XLR input signal is clipping. If this occurs, reduce the microphone level using the Input Gain knob.
  • I. Preset
    Press to go to the Preset screen to see the current preset or to select another one. See the (4.2) Preset/Edit Menu section for more details.
  • J. Key
    Press to go to the Key screen and select the key, scale, and vocal range for the preset. See the (4.5) Key Menu section for more details.
  • K. AutoTune
    Press to turn the AutoTune feature on or off for the current preset. See the (4.6) Autotune section for more details.
  • L. Harmony
    Press once to turn the Harmony feature on or off for the current preset. The backlight will illuminate when it is on. Press and hold to enter the parameter edit screen. See the (4.7) Harmony section for more details.
  • M. FX
    Press once to turn the FX feature on or off for the current preset. The backlight will illuminate when it is on. Press and hold to enter the parameter edit screen. See the (4.8) FX Menu section for more details.

Rear Panel 

  • A. Guitar Input (right-side panel, 1/4” [6.35 mm] TS, Mono)
    Connect your guitar here.
  • B. Guitar Thru (left-side panel, 1/4” [6.35 mm] TS, Mono)
    Connect this output to an amp or powered speaker.
  • C. Microphone Input (XLR, Mono, Balanced)
    Connect a dynamic or condenser microphone here.
  • D. Microphone Input Gain Knob
    Adjust the input gain for the Microphone Input. If the Peak LED flashes, reduce the gain knob.
  • E. +48V Phantom Power Switch
    Use this switch to enable +48V phantom power for condenser microphones connected to the Microphone Input.
  • F. Main Output (XLR, Balanced)
    Connect to an amplifier system or speakers.
  • G. Ground Lift Switch
    Engage this switch to reduce hum or noise.
    H. Phones Output (Stereo 1/8” [3.5 mm])
    Connect your headphones (not included) here.HEADRUSH-VX5-Vocal-Processing-Pedal- (8)
  • I. USB-B Port
    Connect this USB port to a computer to send a stereo audio signal to your computer, receive a stereo audio signal from your computer, send MIDI program change messages (for preset recall, A/B mode, and Talk mode), and access the web interface for software updates. See the (4.12) MIDI Control section for more details.
  • J. Power Input (DC 9V, 1A, center negative)
    Connect the included power cable here to power the unit.
  • K. Power Button
    Press to power on/off.

HEADRUSH-VX5-Vocal-Processing-Pedal- (9)

 

Operation

This chapter describes how to use AutoTune VX5

 Main Screen Overview 

  • To access the main screen (the default screen when powering on), press the Preset button from any menu. Turn the Preset/Edit encoder to scroll through the available presets, and then press it again to select and load the preset.
  • To cancel loading a preset, press the Preset button to return to the main screen or wait five seconds to automatically return to the main screen.

HEADRUSH-VX5-Vocal-Processing-Pedal- (10)

 Preset/Edit Menu 

Loading/Saving a Preset 

  1. From the main screen, turn the Preset/Edit encoder to select a preset. Push the encoder again to load the selected preset.
  2. Adjust the Humanize, Speed, Key, Harmony, or FX parameters for the preset.
  3. Press and hold the Preset/Edit encoder to select from these options:
    • Select Save to overwrite the existing preset
    • Select Save and Rename to save to a new preset
    • Select Copy to copy over another preset
  4. Turn the Preset/Edit encoder to scroll to a character, then push the encoder again to highlight that character. Scroll with the encoder through the character list. Once one is found, push the encoder to select. Press the Key button on a highlighted character space to delete that character. Once the preset is named, press the Preset button to save the preset.

HEADRUSH-VX5-Vocal-Processing-Pedal- (11) HEADRUSH-VX5-Vocal-Processing-Pedal- (12) HEADRUSH-VX5-Vocal-Processing-Pedal- (13)

HEADRUSH-VX5-Vocal-Processing-Pedal- (14)

Renaming a Preset 

  1. Turn the Preset/Edit encoder to select a preset.
  2. Press and hold the Preset/Edit encoder and turn the encoder to select Save & Rename before scrolling through the alpha numeric characters. Up to nine characters can be used for a name. Push the encoder to select a character and advance to the next position to continue naming the preset.
  3. To save the preset name, press the Preset button.

Copying a Preset
Note: Saving over a Preset slot will erase that preset. Save to an <Empty> slot to avoid this.

  1. Press and hold the Preset/Edit encoder.
  2. Turn the Preset/Edit encoder to select Copy.
    Note: Make sure to always rename your preset before copying them to avoid naming confusion.
  3. In the Save to Preset menu, select a Preset slot and save a copy of the loaded preset to that slot by pressing the Preset/Edit encoder.

HEADRUSH-VX5-Vocal-Processing-Pedal- (15) HEADRUSH-VX5-Vocal-Processing-Pedal- (16)

 Speed
Turn the Speed knob to adjust how rapidly pitch correction is applied to incoming audio (0 – 400ms). For a more noticeable effect, turn the Speed knob to adjust the Retune setting towards the “Fast” side. For a more natural sounding pitch correction, turn this towards the “Slow” side.

HEADRUSH-VX5-Vocal-Processing-Pedal- (17)

 Humanize
Turn the Humanize knob (Off – Max) clockwise for a more natural or human voice. Turn the knob counterclockwise to minimize the natural sounding pitch correction for a classic “robotic” AutoTune effect.HEADRUSH-VX5-Vocal-Processing-Pedal- (18)

 Key Menu
Press the Key button to select the key, scale, and vocal range for the preset. HEADRUSH-VX5-Vocal-Processing-Pedal- (19)

Key Range: C, Db, D, Eb, E, F, F#/Gb, G, Ab, A, Bb, B
Scale: Chromatic, Major, Minor, Melodic Minor, Harmonic Minor, Dorian, Phrygian, Lydian, Mixolydian, Locrian
Range: Very Low, Low, Mid, High, Very High

AutoTune Menu
Press the AutoTune button to turn the autotune function on or off for the loaded preset. You may wish to have this turned off if you just want to use the Harmony or FX parts of the preset without autotuning the input signal.

Harmony Menu

Editing a Harmony 

HEADRUSH-VX5-Vocal-Processing-Pedal- (20)

  1. Press and release the Harmony button to toggle this on/off. Press and hold the button again to enter its options menu.
  2. Turn the Preset/Edit encoder to select the Harmony Range, Source, or Level, and push the encoder to see its options.
  3. Turn the Preset/Edit encoder to browse parameters. Push the encoder to select a parameter and turn the encoder to adjust that parameter.
  4. Push the Preset/Edit encoder button again to select the parameter and return to the options menu.

HEADRUSH-VX5-Vocal-Processing-Pedal- (21)

Harmony Range: (Source set to Instrument) Highest, Higher, High, Unison, Low, Lower, Lowest
Harmony Range: (Source set to Off) 3rd High, 5th High, Oct High, 3rd Low, 5th Low, Oct Low, 3rd Low + 3rd High, 5th Low + 3rd High, 5th Low + 5th High, 3rd High + 5th High, Oct Low+ Oct High
Source: Off, Instrument
Level: 0 – 100%

FX Menu 

Selecting an Effect 

  1. Press the FX button to toggle this on/off. Then press and hold the button again to enter the menu.
  2. Rotate the Preset/Edit encoder and then push to select Compressor, Flavor, Chorus, Reverb, Delay.
  3. Push the Preset/Edit encoder to select a parameter and rotate the encoder to browse effects presets or adjust parameters. Press the Preset button to go back to the main preset page.
  4. Push the Preset/Edit encoder to confirm the parameter selections or to toggle the effect’s on/off switches.

HEADRUSH-VX5-Vocal-Processing-Pedal- (22)HEADRUSH-VX5-Vocal-Processing-Pedal- (23)

Compressor:  HEADRUSH-VX5-Vocal-Processing-Pedal- (24)

Compressor Type: Soft, Mild, Hard, Crunch
Mix: 0 – 100%

Flavor: 

HEADRUSH-VX5-Vocal-Processing-Pedal- (25)

Flavor Type: Sizzle, Megaphone, Radio, Soft LoFi, Tube, Phone Vox, Zinger
Mix: 0 – 100%

Chorus: 

HEADRUSH-VX5-Vocal-Processing-Pedal- (26)

Chorus Type: Basic, Smooth, Deep Chorus, Heavy Slow, Robot Voice
Mix: 0 – 100%

Reverb: 

HEADRUSH-VX5-Vocal-Processing-Pedal- (27)

Reverb Type: Hall, Big Room, Chamber, Ambient, Church
Mix: 0 – 100%

Delay: 

HEADRUSH-VX5-Vocal-Processing-Pedal- (28)

Delay Type: Short Echo, Long Echo, Slapback, Ping Pong, Rhythmic Tail, Dub Delay, DM Resonator
Time: 1ms – 4.00s
Mix: 0 – 100%

 Footswitch Menu
Press the Preset Down / -A/B footswitch to switch to the previous preset. Press and hold the footswitch for two seconds to enter A/B mode. Then use the left and right footswitches to turn a selected effect on or off within a preset. Press and hold the footswitch to exit A/B mode.
Press the Preset Up / Talk Mode footswitch to switch to the next preset. Press and hold the footswitch for two seconds to activate Talk mode to bypass the AutoTune, Harmony, and FX features without any effects applied to your vocals. Press either footswitch to exit Talk mode.

HEADRUSH-VX5-Vocal-Processing-Pedal- (29)

Factory Reset
Hold the Key and Preset buttons while powering on VX5 to confirm or cancel a reset to factory default settings. This will clear all user presets and restore the factory presets.

HEADRUSH-VX5-Vocal-Processing-Pedal- (30)

 Web Interface
Connect AutoTune VX5 to your computer and go to vx5.local in a web browser to access the web interface (Windows 11 and macOS 13 – 15 are supported) when any firmware updates are made available. Follow the instructions included with the firmware update file to update AutoTune VX5.

MIDI Control

External MIDI Control
When external MIDI control is enabled, you can use a MIDI device to remotely control some functions of AutoTune VX5. AutoTune VX5 receives MIDI messages on ALL channels. The chart below lists the parameters that can be controlled by sending the listed incoming MIDI messages from your external MIDI hardware:

Function MIDI Message Values
Select Preset (Within the current bank) Program Change 0-127 (Bank 1)
0-121 (Bank 2)
Select Preset Bank CC 32 0 = Bank 1 (Presets 1-128)
1 = Bank 2 (Presets 129-250)
Footswitch A/B Mode CC 16 0 = Disables Footswitch A/B Mode 1 = Selects Footswitch A Mode 2 = Selects Footswitch B Mode
Talk Mode CC 17 0-63 = Disable Talk Mode 64-127 = Enable Talk Mode

Appendix

 Presets

Preset # Category Preset Name Preset # Category Preset Name
1 AUTOTUNE Hard Tune 30 AT + FX [Delay] MildTail
2 AUTOTUNE Warm Tune 31 AT + HARM + FX [Comp +

Flavor]

Oct Vox
3 AUTOTUNE Soft Tune 32 AT + FX [Comp + Flavor] WarmSizzl
4 AUTOTUNE Mild Tune 33 AT + HARM + FX [Comp +

Flavor]

Oct LoFi
5 HARM + FX

[Comp + Chorus]

Octaves 34 AT + FX [Comp + Flavor] WarmZing
6 HARM + FX

[Comp + Chorus]

Fifths 35 AT + HARM + FX [Comp +

Flavor]

Oct Radio
7 AT + FX [Verb] HardVerb1 36 AT + HARM + FX [Chorus

+ Verb]

HardJuice
8 AT + FX [Verb] HardVerb2 37 AT + HARM + FX [Chorus

+ Verb + Delay]

WarmJuice
9 AT + FX [Verb] HardVerb3 38 AT + HARM + FX [Flavor +

Chorus + Verb]

SoftJuice
10 AT + FX [Verb] WarmVerb1 39 AT + HARM + FX [Chorus

+ Verb]

MildJuice
11 AT + FX [Verb] WarmVerb2 40 AT + HARM + FX [Flavor +

Chorus + Delay]

HardWow
12 AT + FX [Verb] WarmVerb3 41 AT + HARM + FX [Chorus

+ Verb + Delay]

WarmWow
13 AT + FX [Verb] SoftVerb1 42 AT + HARM + FX [Chorus

+ Verb + Delay]

SoftWow
14 AT + FX [Verb] SoftVerb2 43 AT + HARM + FX [Chorus

+ Delay]

MildWow
15 AT + FX [Verb] SoftVerb3 44 FX [Verb] Hall
16 AT + FX [Verb] MildVerb1 45 FX [Verb] Room
17 AT + FX [Verb] MildVerb2 46 FX [Verb] Chamber
18 AT + FX [Verb] MildVerb3 47 FX [Verb] Ambient
19 AT + FX [Delay] HardSlap 48 FX [Verb] Church
20 AT + FX [Delay] HardEcho 49 FX [Delay] SlapBack
21 AT + FX [Delay] HardPong 50 FX [Delay] ShortEcho
22 AT + FX [Delay] WarmSlap 51 FX [Delay] LongEcho
23 AT + FX [Delay] WarmEcho 52 FX [Delay] PingPong
24 AT + FX [Delay] WarmDub 53 FX [Delay] DubDelay
25 AT + FX [Delay] SoftSlap 54 FX [Delay] Rhythmic
26 AT + FX [Delay] SoftEcho 55 FX [Delay] Resonator
27 AT + FX [Delay] SoftPong 56 FX [Chorus] Chorus
28 AT + FX [Delay] MildSlap 57 FX [Chorus] Smooth C
29 AT + FX [Delay] MildEcho 58 FX [Chorus] Deep C
Preset # Category Preset Name Preset # Category Preset Name
59 FX [Chorus] Heavy C 80 FX [Flavor] Zinger
60 FX [Chorus] Robot C 81 AT + FX [Comp + Flavor] HardZing
61 AT + HARM + FX

[Comp + Chorus

+ Verb]

3HiVerbMj 82 HARM + FX [Comp +

Flavor + Chorus]

HarmZing
62 AT + HARM + FX

[Comp + Chorus

+ Verb]

3HiVerbMn 83 FX [Flavor] Radio
63 HARM + FX

[Comp + Chorus

+ Verb]

5HiVerb 84 AT + FX [Comp + Flavor] HardRadio
64 HARM + FX

[Comp + Chorus

+ Verb]

OctHiVerb 85 HARM + FX [Comp +

Flavor + Chorus]

HarmRadio
65 AT + HARM + FX

[Comp + Chorus

+ Verb]

3LoVerbMj 86 FX [Flavor] Mega
66 AT + HARM + FX

[Comp + Chorus

+ Verb]

3LoVerbMn 87 AT + FX [Comp + Flavor] HardMega
67 HARM + FX

[Comp + Chorus

+ Verb]

5LoVerb 88 HARM + FX [Comp +

Flavor + Chorus]

HarmMega
68 HARM + FX

[Comp + Chorus

+ Verb]

OctLoVerb 89 FX [Flavor] Phone
69 HARM + FX

[Comp + Chorus

+ Verb]

DblOctVrb 90 AT + FX [Comp + Flavor] HardPhone
70 HARM + FX

[Comp + Chorus

+ Verb]

5ths Verb 91 HARM + FX [Comp +

Flavor + Chorus]

HarmPhone
71 FX [Flavor] Sizzle 92 AT + HARM + FX [Flavor +

Chorus + Delay]

Crazinger
72 AT + FX [Comp +

Flavor]

HardSiz 93 AT + HARM + FX [Flavor +

Chorus + Delay]

Flosizzle
73 HARM + FX

[Comp + Flavor + Chorus]

HarmSiz 94 AT + HARM + FX [Comp +

Flavor + Chorus + Verb]

MinorLoFi
74 FX [Flavor] LoFi 95 AT + HARM + FX [Comp +

Flavor + Chorus + Verb]

MajorLoFi
75 AT + FX [Comp +

Flavor]

HardLoFi 96 AT + HARM + FX [Comp +

Flavor + Chorus + Delay]

RadioGaGa
76 HARM + FX

[Comp + Flavor + Chorus]

HarmLoFi 97 AT + HARM + FX [Flavor +

Chorus + Delay]

Tubular
77 FX [Flavor] Tube 98 AT + HARM + FX [Comp +

Flavor + Chorus + Verb + Delay]

SpookyHrm
78 AT + FX [Comp +

Flavor]

HardTube 99 AT + HARM + FX [Comp +

Flavor + Chorus + Verb + Delay]

MeloMinor
79 HARM + FX

[Comp + Flavor + Chorus]

HarmTube  

Technical Specifications 

XLR Input (Balanced XLR)
Frequency Response 20 Hz – 20 kHz (+0.2 dB)
Dynamic Range 111 dB (A-weighted)
Signal-to-Noise Ratio 110 dB (1 kHz, +4 dBu, A-weighted)
THD+N 0.003% (1 kHz, +4 dBu, -1 dBFS)
Preamp EIN -133 dBu (max gain, 40 Ω source, A-weighted)

-127 dBu (max gain, 150 Ω source, unweighted)

Max Input Level +10 dBu
Sensitivity -46 dBu
Gain Range 59 dB
+48V Phantom Power Switchable on/off
Guitar Input (Balanced 1/4” / 6.35 mm TRS or unbalanced 1/4” TS)
Frequency Response 20 Hz – 20 kHz (+0.2 dB)
Dynamic Range 111 dB (A-weighted)
Signal-to-Noise Ratio 110 dB (1 kHz, +4 dBu, A-weighted)
THD+N 0.003% (1 kHz, +4 dBu, -1 dBFS)
Max Input Level +13 dBu
Input Impedance 1 MΩ
Sensitivity -46 dBu
Guitar Thru (Balanced 1/4″ / 6.35 mm TRS or unbalanced 1/4” TS)
Output Impedance 540/270 Ω (unbalanced/balanced)
Buffered Yes
Main XLR Output (Balanced XLR)
Frequency Response 20 Hz – 20 kHz (+0.2 dB)
Dynamic Range 113 dB (A-weighted)
THD+N 0.001% (1 kHz, -1 dBFS)
Maximum Output Level +20 dBu
Output Impedance 100 Ω
Ground Lift Switchable on/off
Headphone Output (1/8” / 3.5 mm TRS)
Frequency Response 20 Hz – 20 kHz (+0.2 dB)
Dynamic Range 112 dB (A-weighted)
THD+N 0.008% (1 kHz, 10mW per channel into 32 Ω)
Maximum Output Level +20 dBu (unloaded)
Power Output 100 mW RMS (per channel into 32 Ω)
Output Impedance 32 Ω
General
Footswitches (2) Footswitches
Knobs Preset/Edit encoder, Volume knob, Speed knob, Humanize knob
Display 1.8” (45.7 mm) full-color LCD
Connectors Guitar Input (1/4” TS, Mono), Guitar Thru (1/4” TS, Mono), Mic Input (XLR female), Main Output (XLR male), Phones Output (1/4”), USB-B
USB Bit rate: 24 bit
Sample Rate: 48 kHz
Power 9V DC, 1A center-negative; 2.5 mm barrel power adapter
Dimensions(width x depth x height) 6.6” x 6.0” x 2.8” / 16.7 x 15.2 x 7.1 cm
Weight 2.5 lbs / 1.1 kg

Specifications are subject to change without notice.

 Trademarks & Licenses

  • HeadRush is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.
  • Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
  • macOS is a trademark of Apple, Inc., registered in the U.S.A. and other countries.
  • This product may incorporate technologies used under license. Please refer to inmusicbrands.com/product-legal for more information. You can access the product’s web interface for further software license information.
  • All other product names, company names, trademarks, or trade names are those of their respective owners.

headrushfx.com

FAQ

Can I use AutoTune VX5 with multiple singers simultaneously?

For best results, it is recommended to use AutoTune on only one singer at a time.

Documents / Resources

PDF thumbnailVX5 Vocal Processing Pedal
User Guide · VX5 Vocal Processing Pedal, VX5, Vocal Processing Pedal, Processing Pedal, Pedal

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.