HDWR Global CR30HF RFID Reader With Access Control
Card Reading:
The LED will turn green and the buzzer will beep when a card is read, and the reader will send a Wiegand signal.
External LED and Buzzer Control
- When the input voltage for the LED is low, the LED will turn green.
- When the input voltage of the buzzer is low, the buzzer will make a sound.
Quantitative contents of the set:
| Name | Quantity |
|---|---|
| RFID Reader | 1 |
| Wall Fixing Plugs | 2 |
| Self-tapping Screws | 2 |
FAQ
Q: What is the power input range for this RFID reader?
A: The power input range is +DC (9-18V DC).
Q: How many Wiegand bits are available for data output?
A: 26 Wiegand bits are available for data output.
RFID reader with access control SecureEntry-CR30HF
Specifications
- Warranty: 1 year
- Type: RFID Reader with Access Control
- Interface: Wiegand 34
- Verification Type: 13,56 MHz RFID Card
- Access Control: Yes
- Supported Cards: 13,56 MHz
- Voltage: 9-18V DC
- Degree of protection: IP66
- Reading Distance: 0-5cm
- Readable Chip Types: MF
- Operating current: ≤50mA
- Operating temperature: -25°C – 60°C
- Operating Humidity: 10%-98%
- Product dimensions: 12 x 7.5 x 2 cm
- Product weight: 155 g
- Package weight: 195 g
Set contents:
- RFID Reader with Wires
- Mounting pins and screws
- Manual
Features
- IP66 rated for resistance to water ingress and low temperatures
- Can be mounted outdoors
- Support 13,56 MHZ RFID cards
- Compact shape
Installation
- Two holes (A, C) for screws and one hole for cable (B) should be drilled in the wall.
- Rubber pins should be placed in the holes (A, C).
- The cable must be pulled through the wire hole (B).
- Attach the device to the wall with 2 screws.
- Finally, attach the front cover to the device.
Wiring
| Model | Function | Comments |
| Red | Power | +DC (9-18V DC) |
| Black | GND | Ground |
| Green | D0 | Data 0 |
| White | D1 | Data 1 |
| Brown | Led | Green Control LED |
| Yellow | Buzzer | Buzzer control |
(Note: Brown and yellow wires are optional connections)
Connection Diagram
Function Table
| Card Reading | The LED will turn green and the buzzer will beep, meanwhile, the reader will send a
Wiegand signal |
| External LED control | When the input voltage for the LED is low, the LED will turn
green |
| External buzzer control | When the input voltage of the buzzer is low, the buzzer will
make a sound |
| Wiegand Data Output | 26 Wiegand bits are available |
Quantitative contents of the set
| Name | Quantity |
| RFID Reader | 1 |
| Wall fixing plugs | 2 |
| Self-tapping screws | 2 |
Documents / Resources
 |
HDWR Global CR30HF RFID Reader With Access Control [pdf] User Manual CR30HF RFID Reader With Access Control, CR30HF, RFID Reader With Access Control, Reader With Access Control, Access Control, Control |
