Soundcore H30i Quick Start Guide
Model: A3012
Wearing
Instructions for wearing the headphones, indicating left (L) and right (R) earcups.
Charging
Information on charging the headphones. A full charge takes 2 hours and provides 4 hours of playback. A 5-minute charge provides 4 hours of playback.
Powering On & Pairing
Instructions on how to power on the headphones and pair them with a device via Bluetooth. The device is discoverable as 'soundcore H30i'.
Button Controls
Details on the button controls for playback, volume, and activating Bassup mode.
- Power ON/OFF: Press and hold the power button for 3 seconds.
- Pairing: Press and hold the power button for 3 seconds until the indicator light flashes blue.
- Play/Pause/Call Answer/End: Press the multi-function button once.
- Next Track: Press the multi-function button twice.
- Previous Track: Press the multi-function button three times.
- Volume Up: Press and hold the '+' button.
- Volume Down: Press and hold the '-' button.
- Activate Bassup: Press the Bassup button.
Support and Information
For FAQs and more support information, visit the Soundcore website or scan the QR codes provided to view the user guide.
FCC ID: 2AOKB-A3012
IC: 23451-A3012
Input: 5V 0.8A
Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc.
Important Safety Instructions
- Do not disassemble.
- Keep out of reach of children.
- Do not expose the battery to excessive heat.
- Do not use in extreme temperatures or wet environments.
- Ensure the charging port is dry before charging.
- Refer to the user manual for waterproof levels (IPX4, IPX5, IPX6). Do not submerge if rated IPX4.
Hearing Safety
- Avoid listening at high volumes for extended periods.
- Do not set the volume so high that you cannot hear your surroundings.
- Do not use earphones while driving.
- Use caution in potentially hazardous situations.
Magnet Warning
The product generates strong magnetic fields that may interfere with pacemakers, ICDs, and other implants. Maintain a distance of at least 10 cm (3.94 inches) between the product and medical implants.
Regulatory Information
This product complies with EU radio interference requirements. It is marked with the CE symbol.
Disposal: Do not dispose of this product as household waste. Deliver it to an appropriate collection facility for recycling.
Battery Disposal: This symbol indicates separate collection for batteries. Risk of explosion if battery is replaced incorrectly. Do not disassemble, crush, puncture, short circuit, expose to heat above 60°C (140°F), sunlight, extreme low air pressure, fire, or water. Replace only with specified batteries.
Declaration of Conformity
Anker Innovations Limited declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.soundcore.com
Maximum output power: 9.0dBm
Frequency band: 2.4G band (2.402GHz-2.480GHz)
Warranty Information
The product comes with an 18-month limited warranty.