August MR410 USB-C Dual Bluetooth 5 Audio Adapter User Manual
Product Model: MR410
Introduction
Thank you for purchasing the August MR410 USB-C Dual Bluetooth 5 Audio Adapter. This user manual is designed to familiarize you with all the features of this device. Please take the time to read this user manual carefully, even if you are already familiar with a similar product.
Safety Information
To ensure the safety of you and others, please read the Safety Instructions before using this device. Please do not disassemble the product; it can be unsafe and will invalidate the manufacturer's warranty.
Disposal
Please ensure the product and accessories are disposed of in compliance with the WEEE (Waste Electrical and Electronic Equipment) Directive and any other regulations applicable to your country. Always check with the environment agency and any other relevant authorities for current disposal regulations.
Declaration of Conformity
The Declaration of Conformity can be found on our website at http://augustint.com/en/declaration.
Customer Service
You can contact August International Ltd. by phone on: +44 (0)845 250 0586 or by email at: service@augustint.com should you require further technical support or customer service.
Box Contents
- August MR410 USB-C Dual Bluetooth 5 Audio Adapter
- USB 3.0 Adapter
- User Manual
Part Names and Functions
The August MR410 features the following parts:
- Type-C Plug
- Type-C Port (Passthrough)
- Bluetooth Button 1
- Bluetooth Button 2
- Bluetooth Status Indicator 1
- Bluetooth Status Indicator 2
- aptX LL Codec Indicator
- aptX Codec Indicator
- SBC Codec Indicator
- Power Indicator
- USB 3.0 adapter
LED Status and Operation
LED Status Indicators
| LED | Status | Function |
|---|---|---|
| 5 | Flashing Blue | Paring Mode for Device 1 |
| 5 | Constant Blue | Connected to Device 1 |
| 6 | Flashing Blue | Paring Mode for Device 2 |
| 6 | Constant Blue | Connected to Device 2 |
| 7 | Constant Blue | Paring with LL (aptX LL) |
| 8 | Constant Blue | Paring with aptX |
| 9 | Constant Blue | Paring with SBC |
| 10 | Constant Red | Power supplied |
Operation Guide
The August MR410 allows you to connect two Bluetooth audio devices simultaneously. Connect the MR410 to your source device (e.g., PC, TV, game console) via its USB-C plug. You can then connect your Bluetooth headphones or speakers to the MR410. The pass-through USB-C port can be used to charge your source device.
Bluetooth Connection
- Connect the MR410 to the source device. When connecting via a USB port, use the provided USB 3.0 adapter.
- Press button 3 or 4 on the MR410 to activate pairing mode.
- Enable Bluetooth function and activate pairing mode on the receiver device to connect with MR410.
- The MR410 will pair with the device automatically.
- The LED 5 or 6 will turn blue once connected via Bluetooth. If this does not happen, repeat steps 2-4.
Reset the MR410
Press and hold button 3 or 4 for 5 seconds to reset and clear all Bluetooth connections.
Disconnection & Power Off
- Press button 3 or 4 to disconnect Bluetooth devices.
- Unplug the MR410 from the source device to power off.
Reconnect
- If already paired, Bluetooth devices will automatically reconnect.
- Audio devices will disconnect from the MR410 when they are not within the Bluetooth working range. To reconnect, move the audio device closer to the MR410.
- When the Bluetooth is accidentally disconnected, power off and reboot the receiver device. The MR410 will automatically reconnect.
Charging Source Device
Plug the charging cable into the passthrough USB-C port to charge your source device when using the MR410.
Troubleshooting
| Problem | Solution |
|---|---|
| Unable to connect | - Reboot the receiver device. - Disconnect and reconnect the MR410. |
| Unable to pair | - Ensure that the MR410 is in pairing mode. - Ensure that the distance between the MR410 and receiver device is 10 meters or less. |
| No sound | - Press and hold the Bluetooth button 3 or 4 for 5 seconds to reset the Bluetooth connection. - Ensure that the Bluetooth audio device is connected to the MR410 via Bluetooth. - Check the volume of the audio source device and Bluetooth audio device. |
| Dual connection doesn't work | It is better to use two devices of the same brand and model. If the problem persists, contact customer service. |
Specifications
| Feature | Specification |
|---|---|
| Bluetooth version | 5 |
| Bluetooth chipset | Qualcomm CSR8670 |
| Audio support | aptX-LL, aptX, SBC, AAC |
| Bluetooth working range | 10m |
| Power input | DC 5V/2A - 20V/3A |
| Type-C port | Supports fast charging |
| Dimensions | 66(L) x 28(W) x 10(H) mm |
Warranty
This product is guaranteed for twelve months from the date of the original purchase. In the unlikely event of any defect arising due to faulty materials or workmanship, the unit will be either replaced or repaired free of charge (where possible) during this period. An alternative product will be offered in case the product is no longer available or repairable.
This warranty is subject to the following conditions:
- The warranty is only valid within the country where the product is purchased.
- The product must be correctly installed and operated in accordance with the instructions given in this user manual.
- The product must be used solely for domestic purposes.
- The warranty only covers the main unit and does not cover the accessories.
- The warranty does not cover damage caused by misuse, negligence, accident, and natural disaster.
- The warranty will be rendered invalid if the product is resold or has been damaged by inexpert repairs. Manufacturers disclaim any liability for incidental or consequential damages.
- Please consult our customer adviser before returning any product; we are not responsible for any unexpected product returns.
Any faulty product must be kept and returned in the original packaging with all the accessories and the original copy of the purchase receipt.
The warranty is in addition to, and does not diminish, your statutory or legal rights.
Compliance
This product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The Declaration of Conformity may be consulted online at http://www.augustint.com/en/declaration.
UKCA Mark
