BEA MATRIX-3 Kikohoʻe Inductive Loop Sensors
NA PALAPALA
ʻO ka laulā MATRIX Digital Inductive Loop Detector ka hopena kūpono no ka hoʻomalu ʻana i ka pale kaʻa, nā ʻīpuka kaʻa a me nā puka, ka hoʻokele kaʻa a me nā ʻōnaehana mana ʻoihana.
ʻO ka laulā MATRIX kahi mea ʻike kaʻa kaʻa hoʻokahi a ʻelua paha i hoʻopaʻa ʻia i loko o kahi hale paʻa, ua hana ʻia ka pilina me kahi mea hoʻohui ʻenehana 11-pin puni.
Loaʻa nā mana ʻelua i hōʻike ʻia ma lalo nei, hoʻokahi a i ʻole pālua ʻelua, a me 3 mau mea hiki no ka lako mana:
MATRIX-3-S12-24: Hoʻokahi mea ʻike loop me 12 a 24 V AC/DC lako mana.
MATRIX-3-Dl 2-24: Mea ʻike puka lua me ka lako mana 12 a 24 V AC/DC
| ʻenehana | puka hoʻohuoi |
| Hoʻolima | ʻakomi |
| ʻAno ʻike | alo |
| Ka manawa noho | 1 min i ka pau ʻole (ke kū mau) |
| Hoʻopuka manawa Pulse | 100 ms a i ʻole 500 ms |
| Holo ka inductance | 20 μH a i 1000 μH |
| Laulā pinepine | 20 kHz a 130 kHz |
| Kaʻina alapine | 4 no ka loop hookahi |
| ʻIkepili (llUL) | 0.005% a 0.5% |
| Manawa pane | 25 ms no ka loop hookahi |
| 50 ms no ka lua lua (kekahi kanal) | |
| Hoʻonohonoho i ka manawa i ka mana | 1.6 s (Matrix-3-S) |
| 2.2 s (Matrix-3-D) | |
| Lako ikehu | 12-24AC/DC ±10% |
| ʻO ka Frequency Mains | 48 a 62 Hz |
| Hoʻohana mana | < 2.5 W |
| Mahana mālama | |
| laula | -30'C a i + ?0'C |
Hana wela
ka laulā -30'C a +40'C
Degere o ka palekana IP40
2 Nā hoʻokuʻu puka (hoʻololi ʻole i ka hoʻopili ʻana)
- kiʻekiʻe pili voltage : 230 VAC
- ka nui o ka hoʻopili ʻana i kēia manawa: SA (kūʻeʻe)
Nā hōʻailona LED
1 LED uliuli : mana - 1 LED ʻulaʻula: Kūlana Loop 1
- 1 LED ʻulaʻula: Kūlana Loop 2
Nā pale - mīkini hoʻololi hoʻopololei
- Zener diodes
- hoʻokuʻu kinoea clampana
| Hoʻohui | maʻamau 11-pin puni |
| mea hoʻohui 86CP11 | |
| Anana | 77mm (H) x 40mm (W) x 75mm (D) |
| Kaumaha | <200g |
| Hoʻokō huahana | R& TTE 1999/5/EC |
| EMC 2004/108/EC | |
| UL papa inoa mea lako no UL 508 |
KA HOAKAKA O KA SENSO
OLELO HOOLAHA LOOPS
A. KAUWA NUI NO KA LOOP a me ka mea hanai
- 1 .5 mm 2 ʻāpana kea
- uwea kaula nui
- Mea hoʻokaʻawale: PVC a i ʻole Silicone
Hoʻokō huahana - No ke kaula hānai, pono e wili ʻia ka uwea ma kahi o 15 mau manawa ma ka mika
R& TTE 1999/5/EC
EMC 2004/108/EC
UL papa inoa mea lako no UL 508 - Hoʻohana ʻia ka mea hānai no ka holo lōʻihi no ke kelepona pale ʻia (ka honua ma ka hope o nā mea hana wale nō)
- Pono e hoʻopaʻa paʻa ʻia ke kaula hānai e pale aku i ka ʻike hoʻopunipuni (ka lōʻihi: 100 m)
- Pono ka pahu hui uwea pale wai
B. LOOP GEOMETRY
- Me nā puka lou ʻelua i hoʻopili ʻia i kahi ʻenekona ʻelua, hiki i kēia mau puka lou ke kaʻana like i kahi slot maʻamau, inā pono.
No ka hoʻonui ʻia ʻana o nā awāwa, ʻaʻohe pilikia. - E pale i nā puka lou nui a i ʻole ka mea hānai lōʻihi (max 100 m), e hoʻopilikia ʻia ka naʻau.
C. HOOLAHA O KA HELU LOOP TU
| 'Ōlelo Aʻo:
No nā kumu conformity, i kēlā me kēia kūlana, ʻo ka mea antenna i wehewehe ʻia e like me ka ʻili o ka loop i hoʻonui ʻia e ka helu o nā huli ʻaʻole pono e ʻoi aku ma mua o NA = 20 |
No example, inā L=2m, Ea= 1 m a me ka helu o nā hulina=4, a laila ka NA= 2×1 x4 = 8 <20.
E huli i nā waiwai i manaʻo ʻia no nā huli:
| Wahi | Ka helu o nā huli |
| < 3 m ' | 4 |
| 3-5 m ' | 3 |
| 6 – l 0 m ' | 2 |
D. SLOT LOHO
WIRING
| 'Ōlelo Aʻo: Mai wehe i ka momona ma nā pine o ka mea hoʻohui UL KOINA: Pono e kau ʻia ka ʻāpana ma kahi UL i ʻike ʻia ʻo SWIV2 Relay Socket |
ʻO nā kumu kuhikuhi i manaʻo ʻia:
- OMRON PF113A-D
- LUNDBERG R11
- MAGNECRAFT 70-465-1
- IDEC SR3P-05C
- ERSCE ES11
- HOOLAHA MAU
AHAHUI OT11
Pin1: Ka mana lako 12-24 AC/DC
Pin 2 : Hāʻawi mana 12-24 AC/DC
Pin 3 : Loop A
Pin 4 : Loop A
Pin 5 : Loop B (MATRIX-3-D wale nō)
Pin 6 : Loop B (MATRIX-3-D wale nō)
Pin 7 : Relay B COM (MATRIX-3-D wale nō)
Pin 8 : Relay B NO (MATRIX-3-D wale nō)
Pin 9 : Ka honua
Pin 10 : Haawi A COM
Pin 11 : Relay A NO
NA HOOLOLI
A. KA 3 HOOLAHA
- Hoʻonohonoho # 1 : mea ʻike loop hoʻokahi (MATRIX-3-S)
- Hoʻonohonoho # 2: ʻike maka ʻelua ma ke ʻano kūʻokoʻa (MATRIX-3-D me ka hoʻololi hoʻololi #10 OFF)
- Hoʻonohonoho # 3: ʻike maka lua lua ma ke ʻano hui pū (MATRIX-3-D me ka hoʻololi ʻana #10 ON)
B. POTENTIOMETER
KA MANAWA KINA
HOOLAHA
- ʻO kahi potentiometer no ka hoʻoponopono ʻana i ka lōʻihi loa o ka ʻike maka:
mai ka 1 min a hiki i ka pau ole - He potentiometer no ka hoʻoponopono ʻana i ka ʻike laina (Δf) no ka loop A :
mai 0.005% a i 0.5 % - He potentiometer no ka hoʻoponopono ʻana i ka ʻike laina (Δf) no ka loop B :
mai 0.005% a i 0.5 %
C. RELAY CONFIGURATIONS (Dip Switch #3)
Na ka loop A e ho'ā i ka relay A a me ka loop B e ho'ā i ka relay B. Me nā puka lou ʻelua i ke ʻano hui ʻia e hāʻawi ka relay A i ka ʻike maka a hāʻawi ka relay B i ka neʻe ʻana.
| KE KĀNĀ HANA (hoʻololi ʻia #3 OFF) | KĀNĀWAI KĀNĀWAI | |
| ʻIke ʻana |  |
 |
| ʻAʻohe ʻike |  |
 |
D. NA KALI LILO
Ma hope o kēlā me kēia hoʻololi hoʻololi, hoʻomaka ka mea ʻike i kahi kaʻina aʻo
| Kuapo kuapo | Hoʻololi pinepine o ka Loop A | |
| Hoʻololi Luu #2 | Hoʻololi pinepine o ka Loop A (me ka loop hoʻokahi) a i ʻole ka Loop B (me nā puka lou ʻelua) | |
| Hoʻololi Luu #3 | ʻO ka hoʻonohonoho ʻana i ka relay: ʻeleu a paʻa paha | |
| Hoʻololi Luu #4 | Hoʻonui ʻOkoʻa Manaʻo (ASB koho) [koi ʻia no ka ʻike ʻana i nā kaʻa ʻoi aku ka maikaʻi] : I ka wā o ka ʻike ʻana, piʻi ʻakomi ka naʻau i ka 8 manawa o ka naʻau preset i hāʻawi ʻia e ka hoʻoponopono potentiometer sensitivity. Ua kaupalena ʻia i ka sensitivity kiʻekiʻe (Δf = 0.005%). Hoʻi ia i ka waiwai i hoʻonohonoho mua ʻia ma hope o ka pau ʻana o ka ʻike. | |
| Hoʻololi Luu #5 | Relay He hana: hele mai a i ʻole pulse (ʻaʻole i hoʻohana ʻia me ka lua lua i ke ʻano hui) | |
| Hoʻololi Luu #6 | Relay A ʻAno Pulse : komo a puka i waho (hoʻohana wale ʻia ma ka hana pulse) a i ʻole ke ʻano Relay B (me ka lua loop i ke ʻano hui pū) (e ʻike i ke kaha kiʻi aʻe) • ʻaʻole kuhikuhi: Hāʻawi ka relay B i ka pulse e like me nā hoʻololi dip #7 a me ka hoʻonohonoho #8. • kuhikuhi A—B :
Hāʻawi ka relay B i ka pulse wale nō inā ʻike ka loop A ma mua o ka Loop B. Hana ʻia ka ʻike e like me nā hoʻololi dip #7 a me #8 logic
|
|
| Hoʻololi Luu #7
(MATRIX-3-D wale nō) |
Ka hana Relay B : ke alo a i ʻole ka pulupulu a i ʻole ke koho loop no ka relay B pulse: pulse ma ka Loop B a i ʻole ka pulse ma ka Loop A (hoʻohana ʻia me ka loop lua i ke ʻano hui pū) | |
| Hoʻololi Luu #8 (MATRIX-3-D wale nō) |
Relay B ʻAno Pulse: komo a puka i waho (hoʻohana wale ʻia ma ka hana pulse) | |
| Hoʻololi Luu #9 | Ka lōʻihi o ka puʻupuʻu no nā relay ʻelua (hoʻohana wale ʻia ma ka hana pulse): 100 ms a i ʻole 500 ms | |
| Hoʻololi Luu #10 | ʻO ke ʻano hoʻololi lua: kūʻokoʻa a i hui pū ʻia A—B (ʻaʻole hoʻohana me ka loop hoʻokahi) |
| Hoʻonohonoho #1
Loko hoʻokahi t |
Hoʻonohonoho #2
ʻElua loop ma ke ʻano kūʻokoʻa |
Hoʻonohonoho #3
Kaulua lua ma ke ano hui |
||||
| PAU | ON | PAU | ON | PAU | ON | |
| DS#1 | E nānā i ka papaʻaina aʻe | Kiʻekiʻe (loop A) | Haʻahaʻa (loop A) [Kiʻekiʻe -300/6] | Kiʻekiʻe (loop A) | Haʻahaʻa (loop A) [Kiʻekiʻe -30%] | |
| DS#2 | Kiʻekiʻe (loop B) | Haʻahaʻa (loop B) [Kiʻekiʻe -30%] | Kiʻekiʻe (loop B) | Haʻahaʻa (loop B) [Kiʻekiʻe -30%] | ||
| DS#3 | ʻAno hana | ʻO ke ʻano pāpaʻi | ʻAno hana | ʻO ke ʻano pāpaʻi | ʻAno hana | ʻO ke ʻano pāpaʻi |
| DS#4 | ASB PALA | ASB ON | ASB PALA | ASB ON | ASB PALA | ASB ON |
| DS#5 | Relay A :
Aia ma ka loop A |
Relay A :
Pulse ma ka loop A |
Relay A :
Aia ma ka loop A |
Relay A :
Puls e ma ka loop A |
ʻAʻole hoʻohana ʻia | ʻAʻole hoʻohana ʻia |
| DS#6 | Relay A :
Pulse ma ka loop A komo |
Relay A :
Pulse ma ka loop A puka |
Relay A :
Pulse ma ka loop A komo |
Relay A :
Pulse ma ka loop A puka |
Relay B: ʻano kuhikuhi ʻole | Hāʻawi B:
kuhikuhi A— B ano |
| DS#7 | ʻAʻole hoʻohana ʻia | ʻAʻole hoʻohana ʻia | Hāʻawi B:
Aia ma ka loop B |
Hāʻawi B:
Pulse ma ka loop B |
Hāʻawi B:
Pulse ma ka loop B |
Hāʻawi B:
Pulse ma ka loop A |
| DS#8 | ʻAʻole hoʻohana ʻia | ʻAʻole hoʻohana ʻia | Hāʻawi B:
Pulse ma ka loop B komo |
Hāʻawi B:
Pulse ma ka puka B puka |
Hāʻawi B:
Pulse ma ka loop komo |
Hāʻawi B:
Pulse ma ka puka puka |
| DS#9 | 100 ms | 500 ms | 100 ms | 500 ms | 100 ms | 500 ms |
| DS#10 | ʻAʻole hoʻohana ʻia | ʻAʻole hoʻohana ʻia | ʻano kūʻokoʻa | ʻano hui ʻia | ʻano kūʻokoʻa | ʻano hui ʻia |
| Hoʻololi pinepine no ka loop A no ka mea ʻike loop hoʻokahi | |||
| Hoʻololi Luu #1 | Hoʻololi Luu #2 | Loop frequency | |
| PAU | PAU | Kiʻekiʻe | |
| ON | PAU | Waena Kiʻekiʻe (Kiʻekiʻe-20%j | |
| PAU | ON | Mawaena Haʻahaʻa (Kiʻekiʻe – 25%] | |
| ON | ON | Haʻahaʻa kokoke - 30%1 | |
HOIKE LED
- 1 Hōʻike ʻia nā LED ʻōmaʻomaʻo i ka wā e hoʻohana ʻia ai ka module
- Hāʻawi nā LED ʻulaʻula 2
- ke kūlana ʻike loop pili i ke kūlana maʻamau
- ka waiwai o ke ana alapine oscillation a i ʻole ka memo hewa ma ka mana ON
Ma ke kūlana maʻamau, e hoʻomau ka LED ʻulaʻula i ka ON i ka wā e ʻike ai ka loop i kekahi mea metala
Ma ka mana ON e ana ka mea ike i ke alapine oscillation o kēlā me kēia loop. Hōʻike ʻia ka hopena o kēia ana me ka LED ʻulaʻula e pili ana. Hōʻike ka nui o ka uila ʻana i ka ʻumi o ke alapine. No example 4 pōkole pōkole pili i ka alapine ma waena o 40 kHz a me 49 kHz. Ma hope o kēia memo, hoʻi ka LED i ka hōʻike maʻamau.
Inā hāʻule ke alapine oscillation loop ma waho o nā palena i hoʻonohonoho ʻia ma waena o 20 kHz a me 130 kHz e hōʻike ana ka LED ʻulaʻula i kahi memo hewa a hoʻāla ka mea ʻike i ka relay pili. Hōʻike ka alapine ʻana i ke ʻano o ka hewa e like me ka papa aʻe. E noho ka mea ʻike ma kēia mokuʻāina a hiki i ka hoʻopau ʻia ʻana o ka pilikia a hele ke alapine i ka pae kūpono.
Manaʻo: Hoʻomaka koke ka mea ʻike i kahi kaʻina aʻo inā hoʻololi ke alapine oscillation ma mua o 10% i ka hoʻohālikelike ʻana me ka waiwai ana.
| Kuʻia alapine loop | Hōʻike LED |
| Haʻahaʻa loa ka alapine oscillation a wehe ʻia paha | ʻO ke kukui uila e ʻā ana ma 1 Hz |
| HIGH loa ka alapine oscillation | ʻOi aku ka wikiwiki o ke kukui uila ma 2 Hz |
| Hoʻopōkole ʻia ka Loop a ʻaʻohe oscillation | ʻOi aku ka mālie o ke kukui uila ma 0.5 Hz |
PILI PILIKIA
| HOʻOMAʻI | KUMU PAHA | HANA PONO |
| ʻAʻole e hana ka mea ʻike loop Ua pio ka LED ʻōmaʻomaʻo | ʻAʻohe lako mana i ka mea ʻike loop | E nānā i ka lako mana |
| ʻAʻole e holo ka mea ʻike loop Ke ʻālohi mālie nei ke kukui ʻulaʻula (0.5 Hz) | Ua pōkole ka loop pili | E nānā i ke kaula loop |
| ʻAʻole e hana ka mea ʻike loop | Hāʻule ka pinepine o ka oscillation ma waho o ka laulā i ʻae ʻia | E hoʻololi i ka alapine me nā hoʻololi dip a i ʻole e hoʻololi i nā huli loop |
| Ke ʻike pono nei ka loop LED akā ʻaʻole i hana ʻia ka pilina | Hoʻopili maikaʻi ʻole o nā mea hoʻopili relay | E nānā i nā pilina relay |
| ʻAʻole pane maikaʻi nā hoʻololi 5 a 8 | ʻOkoʻa kā lākou hana e like me ka hoʻonohonoho dip switch #10 | E nānā i ke ʻano hoʻololi kūpono e pono ai a hoʻololi i ka hoʻololi dip #10 |
KAKOO KA MEA KUAI
Mai waiho i nā pilikia me ka hoʻoponopono ʻole. Inā ʻaʻole hiki ke hoʻokō ʻia ka hopena maikaʻi ma hope o ka hoʻoponopono ʻana i kahi pilikia, e kelepona iā BEA, Inc. Mai kaumaha i ka hana palekana o ka puka ʻakomi a i ʻole ka makani no ka hoʻonā piha ʻole.
Hikina: 1-866-249-7937
Kanada a me Texas: 1-866-836-1863
Waena: 1-800-407-4545
Komohana: 1-888-419-2564
Ka inoa kalepa: MATRIX
Helu Kumu: MATRIX-3-S12-24
MATRIX-3-D12-24
FCC ID: G9B-MATRIX
IC: 4680A-MATRIX
Hoʻopili kēia hāmeʻa i ka Māhele 15 o nā Rula FCC a me RSS-210 o Industry Canada. Aia ka hana i nā kūlana ʻelua. (1) ʻAʻole hiki i kēia hāmeʻa ke hoʻopilikia ʻino, a (2) pono i kēia hāmeʻa ke ʻae i nā pilikia i loaʻa, me ka hoʻopili ʻana i hiki ke hana i ka hana makemake ʻole.
Palapala / Punawai
 |
BEA MATRIX-3 Kikohoʻe Inductive Loop Sensors [pdf] Ke alakaʻi hoʻohana MATRIX-3-S12-24, MATRIX-3-D12-24, MATRIX-3 Nā Kikohoʻe Loop Kikohoʻe |
