BEA MATRIX-3 Digital Inductive Loop Sensors

APPLICATIONS

MATRIX Digital Inductive Loop Detector ntau yog qhov kev daws teeb meem zoo tshaj plaws rau kev tswj hwm qhov chaw nres tsheb, lub rooj vag thiab lub qhov rooj, lub tsheb nkag mus thiab kev tswj hwm kev lag luam.
Lub MATRIX ntau yog ib qho kev ua haujlwm siab ib leeg lossis ob lub tsheb ntes tau ntim rau hauv lub tsev cog khoom, kev sib txuas yog tsim nrog tus qauv kev lag luam 11-pin round connector.
Ob lub npe hauv qab no muaj, ib leeg lossis ob lub channel, thiab 3 qhov muaj peev xwm rau lub hwj huam mov:
MATRIX-3-S12-24: Ib lub voj ntes nrog 12 txog 24V AC / DC fais fab mov
MATRIX-3-Dl 2-24: Dual voj ntes nrog 12 txog 24V AC / DC fais fab mov

Technology	inductive voj voog
Tuning	tsis siv neeg
Kev kuaj xyuas hom	muaj nyob
Lub sijhawm muaj nyob	1 min rau infinity (nyob ruaj khov)
Pulse lub sij hawm tso zis	100ms lossis 500ms
Inductance khiav	20 μH txog 1000 μH
Ntau zaus	20 kHz txog 130 kHz
Cov kauj ruam ntau zaus	4 rau ib lub voj voog
Sensitivity (llUL)	0.005% txog 0.5%
Cov tshuaj tiv thaiv lub sijhawm	25ms rau ib lub voj voog
	50 ms rau dual voj (txhua channel)
Teeb lub sijhawm ntawm lub hwj chim qhib	1.6s (Matrix-3-S)
	2.2 s (Matrix-3-D)
Fais fab mov	12-24AC / DC ± 10%
Mains zaus	48 rau 62 Hz
Kev siv fais fab	<2.5 W
Cia kub
ntau	-30 'C rau + 0'C

Ua haujlwm kub
Qhov ntau ntawm -30 'C rau + 40'C
Kev tiv thaiv qib IP40
2 tso zis relays (dawb muaj peev xwm hloov-tshaj tiv tauj)

• max contact voltage: 230 VAC
• max tiv tauj tam sim no: SA (resistive)
  LED ntsuas
  1 ntsuab LED: lub zog
• 1 liab LED: voj xwm txheej 1
• 1 liab LED: voj xwm txheej 2
  Kev tiv thaiv
• rwb thaiv tsev transformer
• Zener diodes
• gas tso clamphauv

Kev sib txuas	txheem 11-pin round
	connector 86CP11
Qhov ntev	77 hli (H) x 40mm (W) x 75mm (D)
Qhov hnyav	Yog '> 200 gr
Cov khoom ua raws cai	R&TTE 1999/5/EC
	EMC 2004/108/EC
	UL teev cov khoom siv rau UL 508

POM ZOO TSHAJ PLAWS

LOOPS INSTALLATION TIPS

A. CABLE SPECIFICATIONS FOR LOOP THIAB FEEDER

• 1 hli 5 hla ntu cheeb tsam
• Multi-strand cable
• Cov khoom siv rwb thaiv tsev: PVC lossis Silicone
  Cov khoom ua raws cai
• Rau lub feeder cable, cov hlau yuav tsum tau twisted tsawg kawg yog 15 zaug ntawm 'meter'
  R&TTE 1999/5/EC
  EMC 2004/108/EC
  UL teev cov khoom siv rau UL 508
• Feeder rau kev khiav ntev siv rau cov ntawv ci tshuaj ntsuam kab yog pom zoo (lub ntiaj teb ntawm cov khoom siv kawg nkaus xwb)
• Lub feeder cable yuav tsum tau kho kom ruaj khov kom tsis txhob muaj qhov yuam kev (max ntev: 100 m)
• Waterproof cable junction box yog yuav tsum tau

B. LOOP GEOMETRY

• Nrog ob lub voj uas nyob ib sab txuas nrog lub tshuab hluav taws xob dual channel, nws muaj peev xwm rau cov voj voog no los sib koom ua ke, yog tias xav tau.
  Raws li cov channel yog multiplexed, tsis muaj kev cuam tshuam yuav tshwm sim.
• Tsis txhob muaj lub voj voog loj lossis ntev feeder (max 100 m), qhov rhiab heev yuav raug cuam tshuam.

C. KEV TSO CAI LOS NTAWM LUB ROOJ TU

CEEB TOOM: Rau cov laj thawj kev sib haum xeeb, nyob rau hauv txhua qhov xwm txheej, tus kav hlau txais xov xwm txhais tau tias yog lub voj voog ntawm qhov sib npaug los ntawm tus lej hloov yuav tsum tsis pub tshaj NA = 20

Rau example, yog L=2m, Ea=1 m thiab cov lej = 4, ces NA = 2 × 1 x4 = 8 < 20.
Tshawb nrhiav hauv qab no cov txiaj ntsig pom zoo rau cov lem:

Thaj chaw	Tus naj npawb ntawm lem
<3 m '	4
3-5 m	3
6-l0m '	2

D. SLOT DEPTH

THAWJ

CEEB TOOM: Tsis txhob tshem cov roj ntawm lub connector tus pins UL REQUIREMENT: Chav tsev yuav tsum tau muab tso rau ntawm qhov tsim nyog UL lees paub SWIV2 Relay Socket

Relay qhov (socket) pom zoo cov ntaub ntawv:

• OMRON PF113A-D
• LUNDBERG R11
• MAGNECRAFT 70-465-1
• IDEC SR3P-05C
• ERSCE ES 11
• CUSTOM CONNECTOR
  CORPORATION OT11

Pin1: Fais fab mov 12-24 AC / DC
Pin 2: Fais fab mov 12-24 AC / DC
Pin 3: Qeb A
Pin 4: Qeb A
Pin 5: Loop B (tsuas yog MATRIX-3-D)
Pin 6: Loop B (tsuas yog MATRIX-3-D)
Pin 7: Relay B COM (tsuas yog MATRIX-3-D)
Pin 8: Relay B TSIS MUAJ (tsuas yog MATRIX-3-D)
Pin 9 :loj
Pin 10: Relay A COM
Pin 11: Relay A NO

Kev hloov kho

A. LUB 3 CONFIGURATIONS

• Configuration # 1: ib lub voj ntes (MATRIX-3-S)
• Configuration # 2: dual lub voj ntes nyob rau hauv kev ywj pheej hom (MATRIX-3-D nrog dip hloov #10 OFF)
• Configuration # 3: dual voj ntes nyob rau hauv ua ke hom (MATRIX-3-D nrog dip hloov #10 ON)

B. POTENTIOMETERS

LUB SIJ HAWM

SIJ HAWM

• Lub potentiometer rau kev hloov kho lub sijhawm siab tshaj plaws ntawm kev kuaj pom muaj nyob:
  los ntawm 1 min mus rau infinity
• Lub potentiometer rau kev hloov kho ntawm cov kab rhiab heev (Δf) rau lub voj A:
  0.005% mus rau 0.5%
• Ib lub potentiometer rau kev hloov kho ntawm linear rhiab heev (Δf) rau lub voj B:
  0.005% mus rau 0.5%

C. RELAY CONFIGURATIONS (Dip Hloov #3)

Lub voj A qhib lub relay A thiab lub voj B activates lub relay B. Nrog rau ob lub voj nyob rau hauv ua ke hom, relay A muab kev kuaj pom thiab relay B muab cov kev taw qhia txav.

	ACTIVE MODE (dub hloov # 3 OFF)	PASSIVE MODE (dub hloov # 3 ON)
Kev kuaj pom
Tsis Paub

D. DIP SWITCHES 

Tom qab txhua qhov hloov pauv hloov pauv lub sensor tso tawm cov txheej txheem kev kawm

Npog Hloov	Kev hloov zaus ntawm Loop A
Dip Hloov #2	Kev hloov zaus ntawm Loop A (nrog ib lub voj) lossis Loop B (nrog ob lub voj voog)
Dip Hloov #3	Relay configuration: nquag los yog passive
Dip Hloov #4	Tsis Siv Neeg Sensitivity Boost (ASB kev xaiv) [pom zoo rau cov tsheb thauj khoom zoo dua] : Thaum lub sij hawm kuaj pom qhov rhiab heev nce mus txog 8 npaug ntawm qhov kev xav tau preset muab los ntawm kev hloov kho potentiometer rhiab heev. Nws yog txwv rau qhov siab tshaj plaws rhiab heev (Δf = 0.005%). Nws rov qab mus rau tus nqi preset tom qab nrhiav tsis tau.
Dip Hloov #5	Relay A muaj nuj nqi: muaj los yog mem tes (tsis siv nrog ob lub voj hauv kev sib xyaw ua ke)
Dip Hloov #6	Relay A Pulse hom : nkag los yog tawm (siv tsuas yog ntawm pulse muaj nuj nqi) los yog Relay B hom (nrog ob lub voj nyob rau hauv ua ke hom) (saib daim duab tom ntej) • tsis yog kev taw qhia: Lub relay B muab mem tes raws li lub dip keyboards #7 thiab #8 kev teeb tsa. • kev taw qhia A-B: Lub relay B muab cov mem tes nkaus xwb yog tias lub voj A yog kuaj ua ntej lub Loop B. Qhov kev kuaj pom tshwm sim raws li kev hloov pauv # 7 thiab # 8 logic Ceeb Toom: Thaum kuaj pom, 2 lub voj voog yuav tsum kuaj pom ib txhij rau lub sijhawm luv muaj peev xwm txiav txim siab txog kev txav mus los. Thaum lub voj kev teeb tsa kom paub tseeb tias 2 lub voj voog ze txaus rau ib leeg kom paub meej tias muaj kev pom zoo (ib txwm 1m).
Dip Hloov #7 (tsuas yog MATRIX-3-D)	Relay B muaj nuj nqi: muaj los yog mem tes los yog lub voj xaiv rau relay B mem tes: mem tes ntawm Loop B lossis mem tes ntawm Loop A (siv nrog ob lub voj hauv kev sib xyaw ua ke)
Dip Hloov #8 (tsuas yog MATRIX-3-D)	Relay B Pulse hom: nkag los yog tawm (siv tsuas yog ntawm pulse muaj nuj nqi)
Dip Hloov #9	Pulse duration rau ob qho tib si relays (siv tsuas yog ntawm mem tes ua haujlwm): 100 ms lossis 500 ms
Dip Hloov #10	Dual voj hom: ywj siab los yog ua ke A-B (tsis siv nrog ib lub voj)

	Configuration #1 Ib leeg t		Configuration #2 Dual voj nyob rau hauv kev ywj pheej hom		Configuration #3 Dual voj nyob rau hauv ua ke hom
	OFF	ON	OFF	ON	OFF	ON
DS #1	Saib lub rooj tom ntej		High (lub voj A)	Tsawg (loop A) [High -300/6]	High (lub voj A)	Tsawg (loop A) [High -30%]
DS #2			Siab (loop B)	Tsawg (loop B) [High -30%]	Siab (loop B)	Tsawg (loop B) [High -30%]
DS #3	Active hom	Passive hom	Active hom	Passive hom	Active hom	Passive hom
DS #4	ASB OFF	ASB ON	ASB OFF	ASB ON	ASB OFF	ASB ON
DS #5	Relay A: Muaj nyob rau ntawm lub voj A	Relay A: Pulse ntawm lub voj A	Relay A: Muaj nyob rau ntawm lub voj A	Relay A: Puls e ntawm lub voj A	Tsis siv	Tsis siv
DS #6	Relay A: Pulse on voj A nkag	Relay A: Pulse ntawm lub voj A tawm	Relay A: Pulse on voj A nkag	Relay A: Pulse ntawm lub voj A tawm	Relay B: hom tsis yog kev taw qhia	Relay B: kev taw qhia A—B mode
DS #7	Tsis siv	Tsis siv	Relay B: Muaj nyob rau ntawm lub voj B	Relay B: Pulse ntawm lub voj B	Relay B: Pulse ntawm lub voj B	Relay B: Pulse ntawm lub voj A
DS #8	Tsis siv	Tsis siv	Relay B: Pulse ntawm lub voj B nkag	Relay B: Pulse ntawm lub voj B tawm	Relay B: Pulse ntawm lub voj nkag	Relay B: Pulse ntawm lub voj tawm
DS #9	100ms ib	500ms ib	100ms ib	500ms ib	100ms ib	500ms ib
DS #10	Tsis siv	Tsis siv	Hom kev ywj pheej	Ua ke hom	Hom kev ywj pheej	Ua ke hom

	Kev hloov kho zaus rau lub voj A rau ib lub voj ntes
Dip Hloov #1		Dip Hloov #2	Loop zaus
OFF		OFF	Siab
ON		OFF	Nruab nrab siab (High-20% j
OFF		ON	Nruab nrab qis (siab - 25%]
ON		ON	Tsis tshua muaj siab - 30% 1

LED SIGNAL

• 1 Ntsuab LED qhia tau hais tias thaum lub module yog powered
• 2 Liab LEDs muab
• qhov sib thooj ntsuas ntsuas lub xeev nyob rau hauv ib txwm muaj teeb meem
• tus nqi ntawm qhov ntsuas zaus oscillation lossis cov lus yuam kev ntawm lub zog ON

Nyob rau hauv ib txwm muaj teeb meem lub liab LED nyob twj ywm ON ntev li ntev raws li lub voj pom tej yam khoom hlau

Ntawm lub hwj chim ON lub sensor ntsuas qhov oscillation zaus ntawm txhua lub voj. Qhov tshwm sim ntawm qhov ntsuas no yog tshwm sim los ntawm kev siv lub teeb liab LED. Tus nqi ntawm blinking qhia txog kaum tus nqi ntawm qhov zaus. Rau example 4 luv flashes sib raug rau ib zaus ntawm 40 kHz thiab 49 kHz. Tom qab cov lus no, LED rov qab mus rau qhov qub zaub.
Yog hais tias lub voj voog oscillation zaus ntog sab nraum qhov kev txwv ntawm 20 kHz thiab 130 kHz lub liab LED qhia cov lus yuam kev thiab lub sensor activates tus coj relay. Lub blinking zaus qhia txog hom kev ua yuam kev raws li cov lus tom ntej. Lub sensor yuav nyob twj ywm hauv lub xeev no kom txog thaum qhov teeb meem raug tshem tawm thiab qhov zaus mus rau qhov zoo.

Lus Cim: Lub sensor tso tawm cov txheej txheem kev kawm yog tias qhov zaus oscillation hloov ntau dua 10% piv nrog cov nqi ntsuas.

Loop zaus yuam kev	LED zaub
Oscillation zaus dhau LOW lossis voj qhib	LED ntsais ntawm 1 Hz
Oscillation zaus dhau HIGH	LED ntsais sai dua ntawm 2 Hz
Loop shorted los yog tsis muaj oscillation	LED blinking qeeb qeeb ntawm 0.5 Hz

TXOJ CAI-SAU

SAIB	NYEM QHOV TSEEB	TSIS TXAUS SIAB
Lub voj ntes yuav tsis ua haujlwm Lub teeb ntsuab LED tawm	Tsis muaj fais fab mov rau lub voj detector	Saib xyuas lub zog
Lub voj ntes yuav tsis ua haujlwm Lub LED liab yog flashing maj mam (0.5 Hz)	Lub voj sib txuas yog luv luv	Kos lub voj kab
Lub voj ntes yuav tsis ua haujlwm Cov liab LED ntsais ntawm 1Hz lossis 2Hz	Qhov zaus ntawm oscillation ntog sab nraum qhov kev tso cai	Kho zaus nrog dip keyboards lossis hloov lub voj voog
Lub voj LED tau kuaj pom zoo tab sis tsis muaj kev sib cuag	Kev sib txuas tsis zoo ntawm kev sib cuag relay	Tshawb xyuas kev sib txuas ntawm relay
Dip keyboards 5 mus rau 8 tsis teb zoo	Lawv txoj haujlwm sib txawv raws li kev hloov pauv # 10	Xyuas qhov tsim nyog voj hom yuav tsum tau thiab kho dip hloov #10

KEV PAB CUAM

Tsis txhob cia cov teeb meem daws tsis tau. Yog tias qhov kev daws teeb meem txaus siab tsis tuaj yeem ua tiav tom qab kev daws teeb meem, thov hu rau BEA, Inc. Yog tias koj yuav tsum tos rau hnub ua haujlwm hauv qab no hu rau SEA, tawm lub qhov rooj mus rau qhov tsis ua haujlwm kom txog thaum kev kho kom txaus siab. Tsis txhob txi qhov kev nyab xeeb ntawm lub qhov rooj tsis siv neeg lossis gale rau kev daws teeb meem tsis tiav.

Sab hnub tuaj: 1-866-249-7937 Ib
Canada thiab Texas: 1-866-836-1863 Ib

Central: 1-800-407-4545 Ib
West: 1-888-419-2564 Ib

Lub npe lag luam: MATRIX
Qauv No: MATRIX-3-S12-24
MATRIX-3-D12-24

FCC ID: G9B-MATRIX
IC: 4680A-MATRIX

Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Cov Cai thiab nrog RSS-210 ntawm Kev Lag Luam Canada. Kev ua haujlwm yog ua raws li ob yam hauv qab no. (1) cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam tsis zoo, thiab (2) cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis zoo.

Cov ntaub ntawv / Cov ntaub ntawv

BEA MATRIX-3 Digital Inductive Loop Sensors [ua pdf] Cov neeg siv phau ntawv qhia MATRIX-3-S12-24, MATRIX-3-D12-24, MATRIX-3 Digital Inductive Loop Sensors, Cov Inductive Loop Sensors, Inductive Loop Sensors, Loop Sensors, Sensors

Cov ntaub ntawv

• Cov neeg siv phau ntawv