MEDIA
DECODER NQDR
Quick Start Guide
Overview
Welcome to the Nodestream RiS Quad Decoder (NQDR) Please read these instructions carefully before using this product and save this quick start guide for future reference. See the User Manual for full details via the QR code on the back page.
Video and data streaming solution
In the Box
Rear Connections
IMPORTANT: 100-240VAC 47/63HZ only (UPS recommended).
Do not use the Display Port or HDMI for output to monitors. (Use the Mini-Display port only).
Front Connections
Installation
The NQDR is designed to be mounted in a standard 19” Rack and occupies 3U of space
Ensure there is adequate spacing around the NQDR device for cooling. Cooling air travels in the direction as shown by the arrows.
No vertical loading on the NQDR device.
- Install at 4 mount points
- Connect
Configuration
Access via Web Browser
- Connect the RIS Quad Decoder to your LAN via the Ethernet port and power the device
- Input the IP address into the address bar of a web browser
The device is set to DHCP by default. The IP address can be identified by use of a suitable IP scanning tool. Serial number and/or MAC address should be displayed
Access via the Device
- Connect LAN, monitor, keyboard/mouse and power the device
- Once the device has booted, double click the “RiS configuration” icon on the desktop or hold CTRL and press ~
Complete Configuration
- Login with – User: admin , Password: admin
- When prompted, enter a new password
- Configure device network settings as provided by your Network Administrator
- Once connected and configured on your local network, the device will show online in the Harvest RiS Deliverer application
• RiS networks require specific port settings, see user manual for details
• Devices need to be manually added to the Deliverer application. See Deliverer User Manual for more information
User Manual
Refer to the RIS Quad Decoder User Manual for additional information.
Contact and Support support@harvest-tech.com.au
Troubleshooting
| Issue | Cause | Resolution |
| Device not powering | PSU switch set to off position AC not connected | Confirm AC connected and switch is in the on position |
| No display output | Video output device not connected or powered on | Confirm video output device connected and powered on |
| Network issue (Device showing “offline” in Deliverer application) | Network not connected Network settings incorrect Device IP address incorrect in Deliverer application | Check Ethernet cable is connected and enabled Check network settings, contact your network administrator to diagnose network Confirm IP address of device matches that set in Deliverer |
| Forgot login or network details | N/A | Factory reset to defaults (see User Manual) |
EU REP TerrainQ Market Access Ltd (service@market-access.online) 33 Nikolaou I. Nikolaidi Ave. , KS Tower, 8010 Paphos Cyprus
Harvest Technology Pty Ltd
7 Turner Ave, Technology Park
Bentley WA 6102, Australia
www.harvest.technology
All rights reserved. This document is the property of Harvest Technology Pty Ltd. No part of
this publication may be reproduced, stored in a retrieval system or transmitted in any form or
by any means, electronic, photocopy, recording or otherwise without the written consent of the
Managing Director of Harvest Technology Pty Ltd.
HTG-TEC-GUI-016_0
Documents / Resources
 |
HARVEST TECHNOLOGY Nodestream RiS Quad Media Decoder [pdf] User Guide Nodestream RiS Quad, Media Decoder, Nodestream RiS, Quad Media Decoder, Nodestream RiS Quad Media Decoder, NQDR |
