Harman Kardon Onyx Studio 4 Bluetooth Speaker User Guide
What’s in the box
Connections
Bluetooth
- Bluetooth connection
- Music Control
- Speakerphone
Voice assistant
Tap “Voice Assistant” in the HK Connect app, to make the 
button the activation key of Siri or Google Now on your phone.
Press the button on the speaker to activate Siri or Google Now on your phone. Please make sure Siri or Google Now is enabled on your phone.
HK Connect
Wirelessly links 100+ HK Connect+ compatible speakers together
Play music on one of your HK speakers and then press the HK Connect+ button on all desired speakers to start pairing. All the other HK speakers will play the same music from the music source.
Download the HK Connect app for the following features: stereo setup, firmware upgrade, and device renaming
LED behavior
Please remove the front speaker grille to see the compliance information.
- Bluetooth version: 4.2
- Support: A2DP 1.3 AVRCP 1.6 HFP 1.6
- Transducers: Woofer 2 x 75mm, Tweeter 2 x 20mm
- Rated Power: 4x15W(AC mode); 4×7.5W(Battery mode)
- Frequency response: 50Hz-20kHz(-6dB)
- Signal-to-noise ratio: 80dB A-weighted
- Power supply: 19V/2A
- Battery type: 3.7V/3000mAh Lithium-ion
- Battery charge time: 5 hours
- Music playtime: up to 8 hours (Varies by volume level and music content)
- Bluetooth transmitter power: 0 – 9dBm
- Bluetooth transmitter frequency range: 2402MHz – 2480MHz
- Bluetooth transmitter modulation: GFSK, /4 DQPSK, 8DPSK
- Dimension(H x W x D):260.0 x 278.0 x 159.5mm
- Weight:2061g
The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Download PDF: Harman Kardon Onyx Studio 4 Bluetooth Speaker User Guide
