Overvoltage Protection
00047771
00108878
98047771
98108878
Operating instruction
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference.
Safety Notes
The product is intended for private, non-commercial use only. The product is intended for indoor use only. Use the product for its intended purpose only. Children are not permitted to play with the device. Protect the product from dirt, moisture, and overheating, and only use it in a dry environment. The product may only be operated with the type of power supply network described on the nameplate. Only connect the product to a socket that has been approved for the device. The electrical socket must always be easily accessible. The overvoltage protector may be operated only on a 16 A fused mains socket with a properly installed protective conductor. Do not connect to extension cables, power strips or adapters. Never connect multiple units of this product in a series. Disconnect the product from the network using the power button if this is not available, unplug the power cord from the socket. Do not continue to operate the device if it becomes visibly damaged. Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
Proper use
The built-in overvoltage protector is designed for mains-related overvoltage caused by switching processes or distant lightning strikes. Additional measures must be taken to safeguard against direct lightning strikes. Coarse protection (requirement clause) must be provided for in the building’s electrical system. The primary intended purpose of the product is to protect high-quality telephone and computer systems and audio, video and satellite devices.
Connection
All devices must be switched off before devices can be connected. The overvoltage protector may be connected only between the electrical consumer and an earthed socket. In the operational state, the indicator light for the overvoltage protector lights up.
Warning
If the indicator light is not lit after switching on, the overvoltage protector is defective it may no longer be used and must be exchanged for a new overvoltage protector.
Insurance cover of 20 million euros
Our product liability insurance provides cover of up to 20 million euros for personal injury and damage to property. The prerequisites are proper product use (please note the safety information) and proof that the damage is attributable to non-compliance with the described protective function (please see the technical specifications on the type plate and in these operating instructions).
Service and Support
Please contact Hama Product Consulting if you have any questions about this product. Hotline: +49 9091 502-0
Further support information can be found here: www.hama.com
Technical Data
| Overvoltage protection | Up: P-N=1.8kV;P/N-E=2.5kV / Uc: 255V~ 50Hz Uoc: P-N=2.5kV; P/N-E=5.0kV Type III |
| Total leakage current | 13.500 A(3×4.500 A) |
| Mains supply | 250 V~/16A |
| Connected load | max. 3500 W |
Hama GmbH & Co KG 86652 Monheim / Germany
Service & Support
www.hama.com
+49 9091 502-0
All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.
00047771_00108878_98047771_98108878/03.22
Documents / Resources
 |
hama 00047771 Source Overvoltage Protection Adapter [pdf] Instruction Manual 00047771, 00108878, 98047771, 98108878, Source Overvoltage Protection Adapter |
