vtech W960 Shigar da E-Smart Thermostat

Bayanin samfur

E-Smart W960 Thermostat

Ƙayyadaddun bayanai:

• Daidaituwa: PTAC ko Tsarin famfo mai zafi
• Hanyar Sarrafa: Ƙarfin zafin jiki na bango
• Tushen wuta: Batura
• Haɗin kai: USB-C
• Mobile App: VTech EC Tool

Umarnin Amfani da samfur:

Kafin Ka Fara:
Kafin fara aiwatar da shigarwa, da fatan za a tabbatar cewa kana da masu zuwa:

• Wayar Android ko kwamfutar hannu
• Kebul na USB-C zuwa kebul na USB
• VTech EC Tool app da aka sauke daga Google Play Store

Bi waɗannan matakan:

Mataki 1: Ƙirƙirar Pro na Musammanfile

1. Bude kayan aikin EC akan na'urarku mai wayo.
2. Matsa gunkin menu kuma zaɓi "Profiles".
3. Bi tsokaci don ƙirƙirar pro na musammanfile don PTAC ɗinku ko famfo mai zafi. Lura: Ƙirƙiri daban-daban profiles don PTACs na al'ada da famfunan zafi.
   Mataki 2: Ƙaddamar da Ƙarfafawa da Samun shiga Tashar Tasha ta Thermostat
4. Sauke tsarin PTAC kuma cire murfin.
5. Yin amfani da na'urar screwdriver na Philips, cire murfin murfin don samun damar Wired Thermostat Terminal panel.
   Mataki 3: Ƙarfafa Ikon Ma'aunin zafin jiki na bango
6. Yin amfani da madaidaicin screwdriver, canza matsayi na Dip Switches S3 da S9 don ba da damar sarrafa bangon Thermostat. Alamomin sauya suna a ƙasan taron sauyawa akan PCB.
   • S3: UP/ON
   • S9: KASA/KASHE
     Mataki 4: Haɗe VTech Wiring Harness
7. Haɗa Kayan Wutar Lantarki na VTech zuwa madaidaitan ma'aunin zafi da sanyio.
8. Toshe na'ura mai ba da hanya tsakanin hanyoyin sadarwa na VTech a cikin na'ura mai sarrafawa, tabbatar da amintaccen haɗi.
9. Mayar da iko zuwa PTAC/PTHP.
   Mataki 5: Shigar da batura da Haɗa Thermostat
10. Shigar da batura a cikin ma'aunin zafi da sanyio.
11. Matsa kowane maɓalli akan ma'aunin zafi da sanyio don tashe shi.
12. LED akan mai sarrafa zai canza daga musanya Green/Ja zuwa kore mai ƙarfi, yana nuna nasarar haɗin gwiwa.
    Mataki 6: Ana saita Thermostat
13. Shirya thermostat don daidaitawa ta bin waɗannan matakan:
    1. Matsa gunkin Menu akan ma'aunin zafi da sanyio don tada shi.
    2. Yi amfani da maɓallin Menu da sama/ƙasa don kewaya zuwa zaɓuɓɓuka masu zuwa:
       • Saitunan Tsari> Kanfigareshan Tsari> Saitin Adv ta App> Toshe kebul don saitin
    3. Toshe kebul na USB-C cikin ma'aunin zafi da sanyio.
       Mataki 7: Samar da Thermostat
14. Amfani da VTech EC Tool app, bi waɗannan matakan don samar da ma'aunin zafi da sanyio:
    1. 1. Matsa “installation” don fara aikin samarwa.
       2. Zaɓi ma'aikaci da aka adanafile wanda ka halitta a baya.
       3. Sanya lambar daki (na zaɓi).
       4. Tabbatar da fil ɗin tsaro.
       5. Tabbatar da zanen waya.
       6. Matsa “fara” don fara aikin samarwa.
15. Da zarar an gama saitin, cire kebul na USB-C, kuma thermostat zai sake yin aiki.
    Mataki 8: Gwajin Tsarin
16. Matsa kowane maɓalli akan ma'aunin zafi da sanyio don tashe shi.
17. Yi amfani da kibau na sama/KASA don daidaita yanayin zafin da aka yi niyya.
18. Tabbatar da aikin dumama da farko, sannan gwada aikin sanyaya.
    Lura: Siffar kariyar gajeriyar zagayowar za ta hana compressor kunnawa na kusan mintuna 3 bayan an tashi wuta.
    Mataki 9: Yin hawa da Tsaro
19. Hana mai sarrafawa zuwa chassis na PTAC kuma amintaccen wayoyi.
20. Rufe ko kare duk wata hanyar waya mara amfani.
21. Juya wayoyi ta hanyar da ba za su shiga cikin kwanon rufi ba.
22. Maye gurbin murfin murfin da murfin.
23. Yi amfani da kayan hawan da aka haɗa don hawa farantin bangon thermostat zuwa bango.
24. Kiyaye ma'aunin zafi da sanyio zuwa farantin bango ta amfani da dunƙule tsaro.
25. An gama shigarwa yanzu.

Tambayoyin da ake yawan yi (FAQ)

Q1: A ina zan iya sauke VTech EC Tool app?
A1: Kuna iya sauke VTech EC Tool app daga kantin sayar da Google Play.

Q2: Ina bukatan pro dabanfiles don PTAC na al'ada da famfo mai zafi?
A2: Ee, dole ne ka ƙirƙiri keɓaɓɓen profiles don PTACs na al'ada da famfunan zafi don naúrar ta yi aiki da kyau.

Q3: Wane irin kebul nake buƙata don haɗa na'ura mai wayo zuwa ma'aunin zafi da sanyio don samarwa?
A3: Kuna buƙatar kebul na USB-C zuwa kebul na USB-C don haɗa na'urarku mai wayo zuwa tashar shigar da USB-C akan ma'aunin zafi da sanyio don samarwa.

Q4: Yaya tsawon lokacin fasalin kariya na gajeren zagayowar ke hana kwampreso daga kunnawa?
A4: Siffar kariyar gajeriyar zagayowar tana hana compressor kunnawa na kusan mintuna 3 bayan an tashi wuta.

Shigar da E-Smart W960 Thermostat
Infiniti
PTAC ko famfo mai zafi

KAFIN KA FARA

Bincika kantin sayar da Google Play don aikace-aikacen "VTech EC Tool" ko duba lambar QR da ke ƙasa don samun damar aikace-aikacen da takaddun shigarwa akan rukunin VTech. Zazzage kuma shigar da app (.apk file) akan Android smartphone ko kwamfutar hannu.
Bude EC Tool app, matsa menu> profiles, sannan bi tsokaci don ƙirƙirar pro na musammanfile don PTAC ɗinku ko famfo mai zafi. Wannan profile za a yi amfani daga baya don samar da ma'aunin zafi da sanyio.

Lura: Dole ne ku ƙirƙiri keɓaɓɓen profiles don PTACs na al'ada da famfunan zafi don naúrar ta yi aiki da kyau.
Tabbatar cewa kuna da kebul na USB-C zuwa USB-C kamar yadda zaku buƙaci haɗa na'urarku mai wayo zuwa tashar shigar da USB-C akan ma'aunin zafi da sanyio don samarwa.

MU FARA

1. Sauke PTAC kuma cire murfin.
2. Yin amfani da na'urar screwdriver na Philips, cire murfin murfin don samun damar Wired Thermostat Terminal panel.
3. Yin amfani da madaidaicin screwdriver, canza matsayin Dip Switches don S3 (Up/On) da S9 (Dn/Kashe) don ba da damar ikon sarrafa bangon thermostat.
   Lura: Alamomin sauyawa suna kan PCB, a ƙasan taron sauyawa.
4. Haɗa Kayan Wutar Lantarki na VTech zuwa madaidaitan ma'aunin zafi da sanyio.
5. Toshe VTech Wiring Harness a cikin na'ura mai sarrafawa. Latsa mai haɗawa da ƙarfi don tabbatar da ya ƙulle cikin wuri amintacce. Sannan, mayar da wuta zuwa PTAC/PTHP.
6. Shigar da batura a cikin ma'aunin zafi da sanyio. Matsa kowane maɓalli don tada thermostat. LED a kan mai sarrafawa zai canza daga mai canza Koren/Ja, zuwa m kore don nuna an haɗa shi.
7. Shirya thermostat don daidaitawa:
   1. Matsa gunkin Menu don tada thermostat.
   2. Yi amfani da Menu da sama/ƙasa don zaɓar:
      Saitunan Tsari> Kanfigareshan Tsari> Saitin Adv ta App> Toshe kebul don saitin
   3. Toshe kebul na USB-C cikin ma'aunin zafi da sanyio.
8. Amfani da App, samar da thermostat:
   Da zarar an gama saitin, cire kebul ɗin kuma thermostat zai sake yin aiki.
9. Gwada tsarin ku-Taɓa kowane maɓalli don farkawa, sannan amfani
   Kibiyoyi UP/KASA don daidaita yanayin zafin da aka yi niyya. Tabbatar da zafi da farko, sannan sanyi.
   Lura: Kariyar gajeriyar zagayowar za ta hana compressor kunnawa na ~ 3 mintuna bayan an tashi wuta.
10. Hana mai sarrafawa zuwa PTAC chasse da amintaccen wayoyi. Rufe/kare hanyoyin waya mara amfani. Sanya wayoyi don kada su shiga cikin kwanon rufi.
11. Maye gurbin murfin murfin da murfin.
12. Yi amfani da kayan hawan da aka haɗa don hawa farantin bangon thermostat zuwa bango, sa'an nan kuma aminta da ma'aunin zafi da sanyio zuwa farantin bango ta amfani da ma'aunin tsaro. An gama shigarwa.

Takardu / Albarkatu

vtech W960 Shigar da E-Smart Thermostat [pdf] Jagoran Jagora W960, W960 Shigar da E-Smart Thermostat, Sanya E-Smart Thermostat, E-Smart Thermostat, Thermostat

Magana

• Manual mai amfani