TECH Sinum KW-10m Input/ Littafin Mai Katin Fitar

KW-10m
www.sinum.eu

Abubuwan da ke ciki boye

1 Sinum KW-10m Input/Katin Fitarwa

2 Bayani

3 Yadda ake yin rijistar na'urar a cikin tsarin sinum

4 Bayanan fasaha

5 Bayanan kula

6 Sanarwa ta EU na daidaituwa

7 Takardu / Albarkatu

7.1 Magana

Sinum KW-10m Input/Katin Fitarwa

Katin shigarwa / fitarwa na KW-10m na'ura ce da ke da hannu wajen musayar bayanai tsakanin firikwensin da na'urorin da ke da alaƙa da katin da na'urar Sinum Central. KW-10m sanye take da:

2 x PWM fitarwa

2 x 0-10V fitarwa
1 x 4-20mA shigarwa

2 x Voltage-free lamba
2 x shigarwar jihohi biyu

1 x NTC shigarwar firikwensin

An ƙera shi don hawa akan dogo na DIN. Ana yin sadarwa tare da na'urar tsakiya ta Sinum ta waya.

Bayani

- Tushen wutan lantarki
– Sadarwa
1-2 IN - Halin halin yanzu na shigarwar jihohi biyu (ON/KASHE)
1-2 FITA – Halin halin yanzu na voltagFitowar e-kyauta (ON/KASHE)

Yadda ake yin rijistar na'urar a cikin tsarin sinum

Ya kamata a haɗa na'urar zuwa na'urar tsakiya ta Sinum ta amfani da haɗin SBUS , sa'an nan kuma shigar da adireshin Sinum Central na'urar a cikin mai bincike kuma shiga cikin na'urar. A cikin babban kwamiti, danna Saituna> Na'urori> Na'urorin SBUS> > Ƙara na'ura. Sannan a takaice danna maɓallin rajista akan na'urar.
Bayan an kammala aikin rajistar yadda ya kamata, akan allon za a buɗe taga don ayyana aikin shigarwar jihohi biyu (maɓalli ko shigarwar jihohi biyu). Bugu da ƙari, a ƙarshen rajista, mai amfani zai iya sanya sunan na'urar kuma ya sanya ta zuwa wani ɗaki na musamman.

Yadda ake gane na'urar a cikin tsarin Sinum
Don gano na'urar a cikin Sinum Central, kunna Yanayin Identification a cikin Saituna> Na'urori> Na'urorin SBUS> > Yanayin Ganewa shafin kuma ka riƙe maɓallin rajista akan na'urar na tsawon daƙiƙa 3-4. Za a haskaka na'urar da aka yi amfani da ita akan allon.

Bayanan fasaha

Tushen wutan lantarki	24V DC ± 10%
Max. amfani da wutar lantarki	1,5W
Yanayin aiki	5°C ÷ 50°C
Ma'aunin nauyi na voltage-free lamba 1-2	230V AC / 0,5A (AC1)*
NTC Sensor thermal juriya	-30°C ÷ 50°C
Girma [mm]	69 x 89 x 65
Sadarwa	Przewodowa (TECH SBUS)
Shigarwa	a kan DIN TH35 dogo

* nau'in nauyin AC1: lokaci-ɗaya, mai juriya ko ɗan ƙaramin ƙarfin AC

Bayanan kula

Masu kula da TECH ba su da alhakin duk wani lahani da aka samu sakamakon rashin amfani da tsarin. Mai sana'anta yana da haƙƙin haɓaka na'urori, sabunta software da takaddun bayanai masu alaƙa. An ba da zane-zane don dalilai na hoto kawai kuma suna iya bambanta kaɗan da ainihin kamanni. Jadawalin suna aiki azaman examples. Ana sabunta duk canje-canje akan ci gaba akan masana'anta website.
Kafin amfani da na'urar a karon farko, karanta waɗannan ƙa'idodi a hankali. Rashin yin biyayya ga waɗannan umarnin na iya haifar da rauni na mutum ko lalacewar mai sarrafawa. ƙwararren mutum ne ya sanya na'urar. Ba a nufin yara su sarrafa shi ba.
Na'urar lantarki ce mai rai. Tabbatar cewa an cire haɗin na'urar daga na'ura mai ba da hanya tsakanin hanyoyin sadarwa kafin yin duk wani aiki da ya shafi wutar lantarki (tushe igiyoyi, shigar da na'urar da dai sauransu). Na'urar ba ta da ruwa.
Maiyuwa ba za a zubar da samfurin zuwa kwantenan sharar gida ba.
Wajibi ne mai amfani ya canja wurin kayan aikin da aka yi amfani da su zuwa wurin tarawa inda za a sake yin amfani da duk kayan lantarki da na lantarki.

Sanarwa ta EU na daidaituwa

Tech Sterowniki II Sp. zo ul. Biała Droga 34, Wieprz (34-122)
Ta haka, muna ayyana ƙarƙashin alhakinmu kaɗai cewa katin shigarwa / fitarwa KW-10m ya dace da Umarni:

2014/35/EU
2014/30/EU

2009/125/WE
2017/2102/EU

Don kimanta yarda, an yi amfani da ma'auni masu jituwa:

PN-EN IEC 60730-2-9:2019-06

PN-EN 60730-1: 2016-10
EN IEC 63000: 2018 RoHS

Laraba, 01.07.2024

Cikakkun rubutun na sanarwar EU da kuma jagorar mai amfani suna samuwa bayan bincika lambar QR ko a www.tech-controllers.com/manuals