synapse DIM10-087-06-FW Mai Haɗaɗɗen Sarrafa

GARGADI DA HANKALI: 

• DOMIN GUJEWA WUTA, TSORO, KO MUTUWA: KASHE WUTA A WAJEN CIRCUIT BREAKER KO FUSE DA GWADA WUTA TA KASHE KAFIN SAKA!
• ANA BUKATAR GINDI MAI GIRMA DOMIN GUJEWA TSAYE TSAYE WANDA ZAI IYA LALACEWA MASU MANA A LOKACIN SHIGA.
•  Idan ba ku da tabbas game da wani ɓangare na waɗannan umarnin, tuntuɓi ma'aikacin lantarki; ƙwararrun ma'aikata ne su yi duk aikin.
•  Cire haɗin wuta a mai watsewar kewayawa ko fuse lokacin hidima, sakawa ko cire kayan aiki ko canza lamps.

JAGORAN SHIGA

BAYANI

• Matsakaicin Matsakaici Mai Ikon sarrafawa: 30mA Source/Sink
•  Mitar rediyo: 2.4 GHz (IEEE 802.15.4)
• Ƙarfin fitarwa na RF: +20dBM
•  Yanayin aiki: -40 zuwa +85 C
•  Humidity na Aiki: 10 zuwa 90%, mara taurin kai
•  Direbobi: Iyakance zuwa Direbobin LED 4
•  Girman Waya: 18 AWG, 8" Wayoyi, UL1316, 600V
•  Girma: 2.25"L x 2.0" W x .3" H (57 x 50.8 x 7.6 mm)

HANKALI
DIM10-087-06-FW dole ne a shigar da masu kula da su daidai da na ƙasa, jaha, da lambobin lantarki da buƙatu.

HANYOYIN TSIRA
A ƙasa akwai wasu shawarwari don cin nasara dimming ta amfani da DIM10-087-06-FW. Ana nusar da wayoyi masu sarrafa dimming azaman Dim+ da Dim-. Sigina masu raguwa suna da madaidaicin voltagda 10V DC

•  Kar a niƙa wayar DIM zuwa ƙasan chassis; wannan sigina ce ta dawowa kuma yana da mahimmanci don dimming daidai.
• Hanyar dimming wayoyi daga layin AC idan zai yiwu.
•  Matsakaicin Direbobin LED 4 akan kowane mai sarrafawa, tuntuɓi Tallafin Synapse idan ana buƙatar babban rabo.
• Kar a hau zuwa heatsink ko zuwa direban LED.
• Lokacin shigar da DIM10-087-06-FW cikin yadi, ana buƙatar la'akari da matsayin eriya na ciki da tsangwama don samar da mafi kyawun ƙarfin siginar mara waya. Kafin hawansa na dindindin, tabbatar da cewa eriya ba ta da kowane ƙarfe a cikin inci 12 na eriya.

KAYAN BUKATA 

• Hardware na hawa: (1) #4 da screws M3 da tsayawa da shawarar

UMARNIN SHIGA

GARGADI: DOMIN GUJEWA WUTA, TSORO, KO MUTUWA: KASHE WUTA A WAJEN CIRCUIT BREAKER KO FUSE DA TABBATAR DA WUTA YA KASHE KAFIN WAYA!

HAUWA 

1.  Sanya mai sarrafawa a wurin da ake so kuma a kiyaye shi ta amfani da girman girman #4 da tsayawa ta amfani da rami mai hawa da ke tsakiyar allon.
   WIRING THE DIM10-087-06-FW MULKI
   Lura: Sai dai in an fayyace, haɗin kai zuwa daidaitaccen direban Dim to Off LED da direban LED DALI 2 iri ɗaya ne.
2.  Haɗa wayar WUTA (BROWN) na DIM10-087-06-FW zuwa fitowar 5-24V DC Aux daga direban LED.
3.  Haɗa wayoyi na DIM- da DALI- (GRAY/WHITE STRIPE) na DIM10-087-06-FW zuwa COMMON/DALI- ko COMMON/DIM- dangane da direban LED da kake da shi.
   HANYAR SANSORA
   Lura: Matakai 4-7 don ƙara na'urori masu auna firikwensin zuwa mai sarrafa DIM10-087-06-FW; idan ba ku haɗa na'urori masu auna sigina ku tsallake wannan sashin.
   Akwai abubuwan shigar da firikwensin guda biyu akan DIM10-087-06-FW wanda aka ƙera don na'urori masu ƙarancin ƙarfi (24V DC).
   Ana amfani da wayar SENSOR A (YELLOW) don haɗa firikwensin A.
   Ana amfani da wayar SENSOR B (ORANGE) don haɗa firikwensin B.
4.  Haɗa wayar wutar firikwensin zuwa AUX a kan direban LED (direban LED yana ba da firikwensin).
5.  Haɗa firikwensin gama gari zuwa COMMON/DALI- ko na kowa/DIM- dangane da direban LED da kake da shi.
6.  Haɗa wayar SENSOR A (YELLOW) ko wayar SENSOR B (ORANGE) na mai sarrafa DIM10-87-06-FW zuwa firikwensin CTRL/Control waya.
7.  Idan kana amfani da firikwensin fiye da ɗaya to kwafin shigarwa kamar yadda aka bayyana a sama.
   HAƊA DA'IYYAR DIMMING
   Lura: Matakai 8-10 sune don haɗawa har zuwa Madaidaicin Dim zuwa Kashe direban LED; idan kana amfani da direban LED DALI 2 tsallake zuwa matakai 11-13.
8. Haɗa wayar DIM+ (PURPLE) daga DIM10- 087- 06-FW zuwa wayar DIM+ akan direban LED.
9.  Haɗa wayar DIM- (GRAY/WHITE STRIPE) daga DIM10-087-06-FW zuwa COMMON/DIM- waya akan direban LED.
10. Rike wayar da ba a yi amfani da ita ba DALI+ (PURPLE/WHITE STRIPE).
    (Duba Hoto na 1)

    Lura: Matakai 11-12 sune don haɗawa zuwa direban LED DALI 2.

11.  Haɗa wayar DALI+ (PURPLE/WHITE STRIPE) daga DIM10-087-06-FW zuwa Direban LED DALI+.
12. Sanya waya ta DIM+ (PURPLE) mara amfani.
    (Duba Hoto na 2)

KARFAFA KYAUTA DA MAI MULKI
Bayan haɗa Mai Gudanarwa zuwa Direban LED da kowane na'urori masu auna firikwensin, tabbatar da rufe duk wayoyi marasa amfani. Kunna wutar lantarki zuwa kayan aiki. Hasken ya kamata ya kunna.

LATSA
Lura: Lokacin da aka kunna mai sarrafawa waɗannan launuka suna nuna halin yanzu.

•  Ja = Babu hanyar sadarwa da aka samo (Bace Sadarwa)
•  Green Blinking = An samo hanyar sadarwa, Ba a saita Mai Sarrafa ba (har yanzu ba a ƙara na'urar zuwa SimplySNAP ba)
•  Green = An samo hanyar sadarwa, An saita Mai sarrafawa (Aiki na yau da kullun)

Koma zuwa Littafin Mai Amfani na SimplySNAP don bayani kan samar da DIM10-087-06-FW.

BAYANIN HUKUNCI DA TABBAS 

Bayanin Bayyanar RF: Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa na 20cm tsakanin radiyo da jikinka. Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa. Takaddun shaida na Masana'antu Kanada (IC): Wannan na'urar dijital ba ta wuce iyakokin Class B na hayaniya ta rediyo daga na'urar dijital da aka tsara a cikin Dokokin tsoma bakin Rediyo na Sashen Sadarwa na Kanada.
Takaddun shaida na FCC da bayanan tsari (Amurka kawai)

FCC Sashe na 15 Class B: Wannan na'urar ta bi sashe na 15 na dokokin FCC. Aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa: (1) Waɗannan na'urori na iya haifar da tsangwama mai cutarwa, kuma (2) Dole ne waɗannan na'urori su karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki mai cutarwa.

KATSINA MATAKI RADIO (RFI) (FCC 15.105): An gwada wannan kayan aikin kuma an samo shi don biyan iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, amfani, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan: (1) Sake daidaitawa. ko kuma sake mayar da eriya mai karɓa; (2) Ƙara rarrabuwa tsakanin kayan aiki da mai karɓa; (3) Haɗa kayan aiki a cikin wani maɓalli a kan wani da'ira daban-daban daga abin da aka haɗa mai karɓa; (4) Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Bayanin Daidaitawa (FCC 96-208 & 95-19): Synapse Wireless, Inc. ya bayyana cewa sunan samfurin "DIM10-087-06-FW" wanda wannan sanarwar ke da alaƙa da ita, ya cika buƙatun da Hukumar Sadarwa ta Tarayya ta kayyade kamar yadda dalla-dalla a cikin cikakkun bayanai masu zuwa:

• Sashe na 15, Ƙarshen B, don kayan aikin Class B
•  FCC 96-208 kamar yadda ya shafi kwamfutoci masu zaman kansu na Class B da kayan aiki
•  An gwada wannan samfurin a dakin gwaje-gwaje na waje wanda aka tabbatar da shi bisa ga ka'idodin FCC kuma an same shi ya dace da FCC, Sashe na 15, Iyakokin fitarwa. Ana kunna takaddun file kuma ana samun su daga Synapse Wireless, Inc.

Idan FCC ID na module ɗin da ke cikin wannan shingen samfur ba a iya gani lokacin shigar da shi a cikin wata na'ura, to dole ne wajen na'urar da aka shigar da wannan samfurin a ciki dole ne ya nuna alamar da ke nuni da ruɓaɓɓen FCC ID. Canje-canje (FCC 15.21): Canje-canje ko gyare-gyare ga wannan kayan aikin da Synapse Wireless, Inc. ya amince da shi kai tsaye, na iya ɓata ikon mai amfani don sarrafa wannan kayan aikin.

TAMBAYOYI 

• SamfuraSaukewa: DIM10-087-06-FW
• Ya ƙunshiFCC ID: U9O-SM220
• Ya ƙunshi ICSaukewa: 7084A-SM220
• UL File A'aSaukewa: E346690

DALI-2 Ingantacciyar Mai Kula da Aikace-aikacen

Tuntuɓi Synapse don Tallafawa- 877-982-7888

Takardu / Albarkatu

synapse DIM10-087-06-FW Mai Haɗaɗɗen Sarrafa [pdf] Jagoran Jagora DIM10-087-06-FW, Mai Sarrafa Mai Sarrafa

Magana

• Manual mai amfani