Umarnin Shigarwa
Ƙarƙashin Ƙarƙashin Ƙarfafawa na Waje
Ƙarƙashin Ƙarƙashin Ƙarfafawa na Waje
Hana rami na mm 13, don madaidaicin madaidaicin hexagonal, ta cikin farantin farantin ƙarshen, idan an buƙata. Lura ya kamata a yi wannan kawai lokacin da motar tana wurin (ba kamar yadda aka kwatanta ba) don ba ku damar jera ramin tare da wuce gona da iri akan motar.
Cire dunƙule daga ƙarshen mashaya hexagonal.
Saka sandar ta cikin ramin da aka soke sannan a tsare a wurin ta amfani da dunƙule. Wannan shi ne don a hana a ciro hannun yayin amfani.
(3mm Allen key)
Idan an buƙata, a rage tsawon crank na 1330mm.
- Cire shirin daga saman hannun yana ba da damar cire haɗin gwiwa
- Yanke rikewa zuwa tsayin da ake so
- Hana rami na 4.2mm, 6mm ƙasa da gefen yanke ta gefe tare da sashin ciki.
Zaɓin 1 - shigar da bututun kulle zuwa gefen layin jagora
- Alama matsayi don rami ta bangon da ke kusa da titin jagora a ƙarshen ƙarshen crank kamar yadda aka nuna a ƙasa.
- Hana rami 22mm ta bangon da ke tabbatar da diamita na ramin bai fi 22mm ba saboda farantin murfin yana faɗin 32mm kawai.
Zabin 2 - Shigar da bututun kulle ta hanyar kafaffen titin jagorar fuska
- Hana rami diamita 12mm ta hanyar dogo mai jagora da rami 22mm ta bango.
- Tsakanin rami ya kamata ya zama 16mm daga gefen layin jagora. Idan akwai bangon dawowa wannan na iya takurawa aikin abin rufewa.
Zabin 3 - Shigar da bututun kulle ta hanyar dogo jagora kawai
- Lokacin da aka bayyana hanyar dogo jagora, kuna buƙatar shirya farantin haɗin gwiwa na duniya a kan titin jagora da aƙalla 50mm (ba a kawo fakitin ba). Wannan shi ne don samar da isasshen zurfi ga ganga na kulle.
- Hana rami diamita 22mm ta hanyar dogo jagora.
- Tsakanin rami ya kamata ya zama 16mm daga gefen layin jagora. Idan akwai bangon dawowa wannan na iya takurawa aikin abin rufewa.
Tsare madaidaicin haɗin gwiwa na duniya zuwa bango (ba a kawo kayan gyara ba).
Saka bututu (yanke zuwa tsayi) kuma gyara farantin a bango (ba a kawo kayan gyara ba).
Da zarar an shigar da shi dole ne ko da yaushe duba aikin ƙetare gaggawa, haɗa alamar da aka kawowa (duba ƙasa) don nuna madaidaicin alkibla don iskar hannun.
- Ana ba da farantin murfin aluminium ɗin da aka haɗa a cikin kit ɗin tare da kibau masu nuna hanyar da za a juyar da ƙaramin matakin soke hannun. A cikin yanayin da ba kasafai ba cewa kiban jagora ba daidai ba ne, kuna buƙatar amfani da farantin murfin da aka ajiye akan saman daidaitaccen farantin.
| Sashe na lamba (s) | Bayani | Lambar tallace-tallace |
| 1 | Hannun ƙarami mai jujjuyawa. An kawo shi da 500mm na 7mm (NF) mashaya hexagonal a matsayin ma'auni. |
Farashin MT1M21 |
| 2, 3, & 4 | PVC bututu & murfin aluminum mai kullewa | Saukewa: MT121M4 |
| 5 & 6 | 1330mm crank mai kauri. An kawo shi da 300mm na 7mm (NF) mashaya hexagonal a matsayin ma'auni. |
Saukewa: MT121M3 |
www.garagedoorsonline.co.uk
01926 463888
Takardu / Albarkatu
 |
Ƙarƙashin matakin SWS na waje [pdf] Jagoran Jagora Ƙananan matakan override na waje, ƙananan matakin, override na waje |
