SIFFOFIN GASKIYA

JAGORANTAR MAI AMFANI

Gabatarwa

Na gode da zaban allon wasa na SteelSeries Shift! KarfeSeries, mai keɓancewa ƙirar keɓaɓɓiyar kayan wasan caca ciki har da lasifikan kai, faifan maɓalli, maɓallin linzamin kwamfuta, da sauran kayan haɗi.
An ba da wannan jagorar mai amfani tare da madannai kuma an tsara shi don ya san ku da duk fannonin samfurin mu, saitin sa, da amfanin sa. Muna fatan cewa zai zama da amfani a gare ku. Idan akwai wasu tambayoyi waɗanda ba a amsa su ko bayyana su a cikin wannan jagorar mai amfani, da fatan za a koma zuwa namu website: http://www.steelseries.com

KARSHEVIEW

1. 8 shirye shiryen hotkeys
2. Rikodi a kan-da-tashi macro
3. Mahara kafofin watsa labarai controls
4. Audioararren sauti & belun kunne na zinariya
5. 2 USB 2.0 tashar jiragen ruwa (1 mai ƙarfi)
6. Tsarin ergonomic tare da matakan kafa 3 da tushe mara kyau
7. Hutun wuyan hannu mai karɓuwa
8. Manufofin maɓallan maɓalli sun haɗa da:
   · Gajerun hanyoyin da aka yiwa lakabi da makullin macro
   · Umurnin da aka tattara cikin ilhama don sauƙin amfani
   · Yanayin canzawa ya rage maɓallan F, da NumPad don samar da ƙarin aiki

HADA KATSINA

Shift ya zo tare da masu haɗin 4:

• Keyboard Mai haɗa USB, mai alama tare da K / B - ana buƙata don aikin Shift.
• Mai haɗin haɗin haɗin USB, mai alama tare da EXT. - haša idan kanaso kayi amfani da na'urorin da suke cin wuta a tashar da take aiki a bayanta (wanda aka yiwa alama da walƙiyar walƙiya) na Shift ɗinka.
• Kebul na fadada odiyo - hada makirufo da sandunan fitarwa don amfani da mashigin odiyo a bayan bayan Shift dinka.
  An ba da shawarar cewa ka haɗa dukkan matosai don amfani da sauƙin sauƙin tashar jiragen ruwa na Shift.

SAUYA MABUDI

Babban sanannen Maɓallin Keɓaɓɓen Sarfe na KarfeSeries shi ne cewa yana ba da damar sauya makullin ya danganta da halin da ake ciki (watau wane wasa ake bugawa). Don cire maɓallin maɓalli, cire ƙullin a gefen dama na madannin ta jawo shi sama.
Don maye gurbin maetallin maɓalli, saka shi farawa daga gefen hagu, kuma sanya kowane sashe har sai ya yi layi daidai da tushe na allon madannai. Snapauki makullin a gefen dama don tabbatar da cewa an saka maƙullan cikin aminci kuma cikin aminci. Ka tuna cewa profiles sune keɓaɓɓun maɓallan kuma na musamman ne ga kowane maɓalli. (duba Profile Gudanarwa, shafi na 7).

SHIGA SOFTWARE

Shift ɗin yana da ƙarfi ta hanyar masarrafar Injin Injin Karfe, wanda ke ba da cikakken iko game da Shift.
1. Zazzage software mai dacewa daga namu website: http://www.steelseries.com/downloads/
2. Kaddamar da mai shigarwar kuma bi umarnin kan allon.

Lura: Don tabbatar da cewa mabuɗin yana aiki daidai, da fatan za a tabbatar cewa an shigar da madannin a yayin shigarwar. Toshe cikin kebul ɗin da aka lakafta "K / B".

SOFTWARE A KANVIEW

Ana iya isa ga Injin KarfeSeries ta ɗayan hanyoyi uku:

1. A cikin taskbar akan ƙasan dama na allonku, ku nemi tambarin SteelSeries. Danna-dama a gunkin kuma danna “Buɗe Injin Karfe”.
2. Danna maballin farawa, sa'annan ka tafi Shirye-shiryen -> KarfeSeries -> Injin KarfeSeries, sa'annan danna “Injin KarfeSeries”.
3. Idan kana da Matsakaitan Maballin da aka saka a cikin maballin Keyboard na Shift, maɓallin da ke dauke da tambarin SteelSeries zai ɗora Injin KarfeSeries. Tana can sama da maɓallin "Gungura Gungura" akan maballanka a saman kusurwar dama, tsakanin "Kulle Bar" da "Kulle Kulle".
Don canza yare a kan Injin KarfeSeries, danna dama-dama gunkin tare da tambarin SteelSeries akan allon aikinku (wanda yake kan ƙasan dama na allonku). Danna "Saituna". Zaɓi yare da kuke so daga jerin jerin zaɓuka kuma latsa “Ok”.
Don bincika wane fasalin software na Injin KarfeSeries yake gudana, danna-dama kan tambarin kan aikinku, kuma latsa “Game da”. Fitowa zai bayyana yana nuna lambar sigar injin da yake gudana.

PROFILE Gudanarwa

Allon Maballin KarfeSeries ya zo tare da tsoho profile dangane da makullin yanzu, amma software tana ba da damar pro da yawafiles da za a shirya tare da keɓantattun maɓallan maɓalli. Duk saituna pro nefile-specific sai dai a jere na saman hotkeys (duba Hotkeys, shafi na 10).

Profiles za a iya ƙirƙira, gyara, kwafa, da sharewa kamar yadda ake so ta amfani da menu na gefen hagu. Banda shine tsoho profile ba za a iya gyara ko gogewa ba. Don yin profile canje-canje, danna-dama akan profile suna, kuma danna aikin da ake so (Share, Sake suna, Ƙirƙiri kwafi, da sauransu).

Don ƙirƙirar sabon profile, danna maɓallin da aka yiwa lakabi da “New Profile".
Sabuwar profile zai zama daidai da tsoho profile. Canje -canje da aka yi wa kowane profile ko dai za a iya ajiye shi tare da maɓallin Ajiye ko a sake amfani da maɓallin Soke. Yana da mahimmanci a lura cewa kawai canje -canjen da ba a adana ba za a iya mayar da su ta amfani da "Soke".

PROFILE KWANCIYARWA

A kan maballin maɓallin KarfeSeries Shift, kusan kowane maɓalli ana iya keɓance shi ta amfani da Injin SteelSeries. Don yin canji zuwa maɓalli, kawai danna maɓallin a cikin allon allo. A cikin wannan tsohonample, mun danna harafin “F” akan madaidaiciyar madannai:

Lokacin da ka danna shi, menu ya kamata ya bayyana a ƙasan:

Sunan, Maballin Maɓalli, Maɓallin Launi, da maɓallan Launin rubutu duk zasu keɓance yadda maɓallin ke bayyana a cikin Injin KarfeSeries. Mabudin Sake saitin zai sake juya duk canje-canjen da bashi da ceto.

Nau'in Ayyuka shine tushen maɓallin keɓance. Typeaunin Fayil na Aikin Nau'in yana da zaɓi uku waɗanda ke ƙayyade aikin mabuɗin maɓallin kewayawa. Zaɓuɓɓuka uku sune Macro, Launch Application, da Disable Key.
A kashe Maɓallin zai, kamar yadda sunansa ke nunawa, tabbatar da cewa babu abin da zai faru idan aka danna maɓallin. A cikin wannan tsohonample, kashe maɓallin “f” ba ma zai ba da damar harafin ya fito ba yayin bugawa.
Applicationaddamar da Aikace-aikacen zai ba ku damar gudanar da shirin tare da danna maballin. Kawai danna maballin "Lilo" kuma zaɓi shirin da kuke son gudanarwa.

Macro zai ba da izinin mabuɗin don yin kusan komai. Kowane maɓallin maɓallin danna kan mizanin maɓallin keɓaɓɓe, kuma ana iya gudanar da su cikin kowane haɗin da ake so. Tare da Rikodi na jinkirta akwatin da aka bincika, har ma za ka iya saka lokaci tsakanin kowane “maɓallin”. Kuna iya jan ayyuka daga jerin Ayyuka akan dama zuwa maɓallin da kuke so (duba Ayyukan Macros / Ayyukan Aiki, shafi na 10).

Akwai abubuwa biyu da za ku tuna:
1. Abin da aka nuna ba lallai ne abin da zai fito ba lokacin da ka danna maɓallin, amma maimakon rikodin wanda za a danna "maɓallan" tare da wannan macro. A cikin tsohonampa sama, ba za a buga kalmomin "Komawa (Shiga)" ba, amma zai yi aiki kamar an danna maɓallin "Shigar" a kan madannai na al'ada. Kuna iya faɗin lokacin da za a danna latsa haruffa guda ɗaya saboda za su sami sarari tsakanin su akan nuni (alal misali, haruffan n, o, da m sun rabu).

2. Idan kayi kuskure wajen saita macro, zaka iya latsa maballin Share ko amfani da Advanced Edit don gyara lokacin macro ko maɓallan.

Ayyukan macros / custoM

A gefen dama na taga akwai menu na macros kuma ana haɗasu zuwa gida uku. Ana iya bincika abubuwan kowane fanni ta latsa maballin kibiya kusa da sunayensu. Lokacin da kibiyar ke nunawa kasa, sai a fadada jerin (ana nuna su). Lokacin da yake fuskantar dama, sai ya rushe (ɓoye).

Ayyukan da ke ƙarƙashin rukunin Macros da Keananan Maɓallai ana iya karanta su kawai kuma ba za a iya yin gyara ko share su ba, koyaushe za su kasance a gare ku don amfani da ko kwafa azaman tushen macros na al'ada. Da fatan za a koma cikin Maɓallan Keɓaɓɓu duk lokacin da ake buƙatar amfani da maɓallin da ya ɓace a maɓallin kewaya na yanzu.

Ayyukan al'ada duk macro ne da kuka yi rikodin da hannu lokacin sanya su zuwa wasu maɓallan (duba Profile Keɓancewa, shafi na 9). An adana su a cikin wannan jerin don a iya amfani da su da sauri akan wasu maɓallan, ko don lokacin da yakamata a kashe macro na ɗan lokaci.
Kuna iya ƙirƙirar sabon macro kuma kar a tsara shi zuwa kowane maɓalli ta danna maɓallin da aka lakafta Sabon Aiki. Bayan haka, daga baya kuna iya amfani da macro ta hanyar zaɓar sunansa a menu, sannan jawo shi zuwa maɓallin da kuke so.

A matsayin bayanin kula na ƙarshe, zaku iya ƙirƙira, kwafa, da share ayyukan al'ada kamar profiles ta danna-dama akan sunan kuma zaɓi aikin da ake so.

GASKIYA

Hotananan hotkeys suna da matakai 3 kuma zasuyi aiki tare da Injin KarfeSeries kuma a cikin wani keɓance ta kowane kwamfuta. Akwai maɓallan guda huɗu kusa da Hotkey 8 - waɗanda ake yiwa lakabi da 1, 2, da 3 toggles wane layin hotkey ɗin da kuke amfani da shi. Maballin na huɗu, wanda ke nuna jan da'ira, ana amfani dashi don rikodin macro akan-kan-tashi. Akwai hanyoyi biyu don yin rikodin macrokeykey:

1. A-kan-tashi: latsa maɓallin Rikodi, latsa maɓallin layin, sannan hotkey ɗin da za a rage, buga a macro, sannan a sake danna maɓallin Rikodi don gama rikodin. Lura cewa a duk cikin aikin tsawan LEDs ɗin da aka yiwa alama tare da 1, 2, da 3 zasu yi walƙiya suna nuna alamar da aka zaɓa a halin yanzu. Idan an sanya Injin KarfeSeries, sabon rikodin Hotkey macro zai bayyana a cikin Ayyukan Al'adu.
2. Amfani da Injin KarfeSeries: zaɓi wane nau'in hotkey ɗin da kuke son aiki tare da amfani da maɓallan da aka nuna sama da shimfidar keyboard:

Sannan zaɓi maɓallin kuma gyara shi (duba Profile Keɓancewa, shafi na 8-9).

Yadudduka
Ko da yake kuna iya keɓance pro da yawafiles kamar yadda kuke so a cikin Injin SteelSeries, kowane profile za a iya ƙara ƙwarewa a ƙarƙashin yawan yadudduka. Maɓallin keɓaɓɓen maɓalli wanda ya zo tare da Shift ɗinku yana fasalta yadudduka huɗu daban -daban, yayin da sauran maɓallan maɓallan na iya samun adadi daban -daban da tsarin yadudduka.

A saman kusurwar dama na keyboard, kusa da maɓallin tare da tambarin SteelSeries, akwai maɓallan maɓalli guda biyu da aka yiwa alamar Kulle Bar da Kulle Kulle. A gefen dama na maɓallan ya kamata a sami fitilu biyu kore waɗanda ke nuna wane Layer aka kunna.

Na huɗu profiles da aka tallafa wa sune Firamare (tsoho, “Babban” Layer), Kulle Bar, Kulle Kulle, da Kulle Bar + Kulle [ya fitar da wannan].

Ana nuna Filayen Firamare lokacin da duka wutar Bar da Pad suna kashe. Ayyukan da aka sanya a cikin Layer Firamare za su kasance a cikin dukkan matakan har sai an sake maɓallin kewayawa tare da wani aiki a cikin wani Layer daban.
Lokacin da aka kunna Lack Lock layer, za a kunna hasken Bar, kuma za a maye gurbin mabuɗan Aiki (F1-F12) da sabon maɓallan maɓallan B1-B12, waɗanda aka dakatar da su ta asali.

Lokacin da aka kunna Layer Lock Layer, za a kunna fitilar, kuma za a maye gurbin Lambar Lambar da ke gefen dama dama na mabuɗin ta sabon maɓallan maɓallan P0-P13, waɗanda aka kashe ta hanyar da ba ta dace ba.

Lokacin da aka kunna duka Layer biyu (Kulle Bar da Kullin Kulle), duka canje -canjen da aka ambata zasu faru. Duk yadudduka huɗu suna da saitunan maɓallan nasu, don haka ana iya zana maƙallan iri ɗaya ta hanyoyi daban -daban a ƙarƙashin pro guda ɗayafile, kuma ana iya canza aikin maɓallin tare da latsa maɓallin a kan madannai. Yana da mahimmanci a lura cewa zaku iya shirya kowane maɓalli akan maɓallin makullin kuma zai zama na musamman ga wannan Layer, ba'a iyakance shi kawai ga wuraren BAR da PAD ba.
Don shirya ayyukan macro na maɓalli a cikin wani takamaimai, zaɓi layin da kuke so ku yi aiki tare da amfani da maɓallan da aka nuna a ƙarƙashin shimfidar keyboard:

Sannan zaɓi maɓallin kuma gyara shi (duba Profile Keɓancewa, shafi na 8-9).

AMFANIN PROFILE

Akwai hanyoyi 2 don kunna profile:

1. Danna-dama akan profile suna a menu na hannun hagu na babban taga. Danna "Kunna Profile”. Wannan zai zama profile kuna ƙarƙashin sai dai idan kuna cikin shirin da ke amfani da wani profile (duba zaɓi 2).
2. Don samun profile da za a yi amfani da su a duk lokacin da kuke amfani da takamaiman aikace -aikace ko shirin, danna kan profile don gyara shi. A saman babban taga, danna kan shafin da aka yiwa lakabi da "Properties". Danna maɓallin da aka yiwa lakabi da "..." don zaɓar shirin, ko buga ɗaya a hannu. Da zarar an zaɓi shirin, wani mashaya zai bayyana, yana ba da izinin profile da za a jawo ta da shirye -shirye da yawa. Don cire shirin daga lissafin, danna maɓallin X kuma ajiye.
Lura: Idan akwai pro da yawafiles ta amfani da EXE guda ɗaya - pro na farko da ya dacefile za a ɗora Kwatancen lokacin da aka fara wasan/aikace -aikacen.

SAURAN ZABI

A saman kusurwar dama na allon, akwai maballin uku da aka yiwa alama Config, Stats, da News. Sanya ya kawo ku zuwa ga babban allon nuni inda ake kera makullin. Labarai za su bude sabon labarai ne daga Kamfanin SteelSeries.

STATS

Atsididdiga za ta kawo ku zuwa nuni na keyboard daban, wanda aka nuna a ƙasa:

 Don amfani da shi, latsa maɓallin Farawa kusa da ƙasan taga, sa'annan danna maɓallan akan madanninku yadda kuka ga dama. Latsa maɓallin Tsayawa a kowane lokaci don dakatar da gwajin, kuma nunin zai fito sau nawa kowane maɓallin aka danna.

Alamar launi za ta taimaka nuna alamun mabuɗan da aka danna sau da yawa, kuma duk gwajin zai kasance a kan kari. Ka tuna cewa yayin gwajin, kowane mabuɗin mabuɗin zai ci gaba da aiki.

KAMMALAWA

Babban mahimmancin wannan fasalin shine cewa zaku iya gudanar da wannan gwajin a bayan fage yayin kunna kowane wasa ko gudanar da kowane aikace-aikace. Mai ƙidayar lokaci tare da sakamako zai iya taimaka muku lissafin ayyukanku a kowane minti (APM). Kari akan haka, sanin wadanne makullin da aka danne sau da yawa na iya yin tasiri kan yadda kake son tsara makullan ko sanya macros don wannan aikin (misali zaka iya matsar da maballan guda biyu wadanda galibi ake amfani da su a hade kusa).

 

www.karashirinaneu.com

KarfeSeries Canza Kebul Na Jagorar Mai Amfani - Zazzage [gyarawa]
KarfeSeries Canza Kebul Na Jagorar Mai Amfani - Zazzagewa

Magana

• Manual mai amfani