TAKARDAR ODAR XNUMXADXNUMX ZAMA AIKATA
WPG-1 Metering Pulse Generator
V3.02 Firmware
WPG-1 Metering Pulse Generator
MATSAYI HAUWA
Ana iya saka WPG-1 a kowane matsayi. Ana ba da ramukan hawa biyu. Dole ne a saka WPG-1 a cikin wani shinge mara ƙarfe ko kuma wani wuri inda zai iya karɓar bayanin mara waya daga mita ba tare da tsangwama ba. Dole ne a saka WPG-1 a cikin kusan ƙafa 50 na mitar ku. Nisa sun bambanta tare da ginin gini da kusanci zuwa mita. Don sakamako mafi kyau, hawa kusa da mita gwargwadon yiwuwa. Layukan fitarwa na bugun jini daga WPG-1 na iya yin nisa mai nisa, amma WPG-1 yakamata ya sami damar isa ga layin gani mara yankewa zuwa mafi girman yiwuwar samun sakamako mafi kyau. Zaɓi wurin hawa wanda ba zai sami kowane sassa na ƙarfe ba - motsi ko tsaye - wanda zai iya shafar sadarwar RF.
SHIGA WUTA - WPG-1 yana aiki ne ta AC voltage tsakanin 120 da 277 volts. Haɗa wayar “zafi” na AC zuwa tashar L1. Haɗa tashar NEU zuwa waya ta “tsaka tsaki” na AC. Haɗa GND zuwa tsarin lantarki Ground. HANKALI: Wayar Waya zuwa Tsatsaki kawai, BA Mataki zuwa Mataki ba. Wutar lantarki shine
auto-jere daga 120 zuwa 277VAC. Babu saituna ko saituna da suka wajaba. Dole ne a haɗa ƙasa. Idan babu tsaka-tsaki na gaskiya a wurin hawa, haɗa duka tashoshin NEU da GND zuwa ƙasa.
MATA DATA INPUT - WPG-1 yana karɓar bayanai daga mitar lantarki na AMI mai kunna WiFi wanda aka haɗa tare da tsarin mai karɓar WiFi na WPG-1. Dole ne a haɗa mitar tare da tsarin mai karɓar WiFi kafin a iya amfani da WPG-1. Da zarar an haɗa su, WPG-1 zai fara karɓar bayanan kWh, kVARh, ko kVAh daga mita. (Dubi Shafi na 3.) Aiki - Duba shafuka masu zuwa don cikakken bayani game da aikin WPG-1.
FITARWA - Ana ba da samfuran busassun busassun waya guda biyu akan WPG-3, tare da tashoshin fitarwa K1, Y1 & Z1 da K1, Y2, & Z2. Ana ba da danniya na wucin gadi don lambobin sadarwa na relays masu ƙarfi a ciki. Ya kamata a iyakance nauyin fitarwa zuwa 2mA a 100 VAC/VDC. Matsakaicin lalatawar wutar lantarki na kowane fitarwa shine 120mW. Ana kiyaye abubuwan da aka fitar ta fuses F800&F1. Daya bisa goma (2/1) Amp fuses (matsakaicin girman) ana kawo daidaitattun.
Tsarin Waya WPG-1
| WPG-1 Mara waya ta Pulse Generator Tsarin Waya |
GASKIYYA | |||
| A'A. | DATE | BAYANI | ||
| RANAR ASALIN 07/1/22 |
SCALE N/A |
|||
| BABI NA KWANA | AYUBA NO. | AN duba | JANO WHB |
|
Brayden Automation Corp./ Solid State Instruments div.
6230 Aviation Circle
Loveland, CO 80538
(970) 461-9600
support@brayden.com
www.solidstateinstruments.com
WPG-1 Mara waya ta Mitar Pulse Generator
Haɗa Mai karɓar Rediyon WiFi
WPG-1 yana ƙunshe da tsarin Wifi wanda ke aiki azaman wurin shiga Wifi. Ana kiran wannan WPG_AP. Dole ne a haɗa mitar lantarki ta AMI tare da wannan wurin shiga. Ana iya yin wannan ta hanyar masu amfani ko a kan su website idan suna da tsari ta atomatik. Tsarin haɗin kai, wanda aka fi sani da “samarwa”, ya bambanta daga mai amfani zuwa mai amfani, kuma ba duk abubuwan da ake amfani da su ba ne ke ba da damar rediyon WiFi a cikin mitoci. Tuntuɓi mai amfani da wutar lantarki don gano yadda tsarin samar da su ke cika. Dole ne a kunna WPG-1 don ƙirar WPG_AP don haɗa su da mita kuma dole ne ya kasance tsakanin kewayon mita, yawanci tsakanin ƙafa 50-100. WPG-1 da kwalinsa ana yiwa lakabi da SSID da Dogon Tsarin Na'urar Identifier ("LFDI").
Wadannan wajibi ne don samar da mita tare da WPG-1.
WPG-1's Wifi Module's SSID da LFDI ana tsara su a cikin mita ko mai amfani ta hanyar hanyar sadarwa ta AMI mesh rediyo. Ta hanyar “haɗe-haɗe”, mita da tsarin WPG-AP sun ƙirƙiri “cibiyar sadarwa” mai lamba 2 wifi. Babu wasu na'urori masu kunna wifi da zasu iya shiga wannan hanyar sadarwar. Tsarin AP (aiki a matsayin Abokin Ciniki) ya san cewa zai iya nema kawai da karɓar bayanan mita daga waccan mitar lantarki (aiki azaman Sabar).
Kafin kunna WPG-1, shigar da tsarin WiFi a cikin rukunin masaukin WPG-1 idan ba a riga an saka shi ba. Amintacce tare da 4-40 x 1/4 ″ ɗorawa.
Ƙarfafa WPG-1 (Wannan yana ɗauka cewa mai amfani ya riga ya aika SSID da LFID zuwa mita.)
Aiwatar da wutar lantarki zuwa WPG-1. RED LED akan tsarin WiFi zai yi haske sau ɗaya a cikin daƙiƙa uku yana neman mita.
Da zarar an gama tsarin haɗawa, RED LED zai ci gaba da kasancewa a kunne don nuna cewa an haɗa mita tare da Module na WiFi a cikin hanyar sadarwar wifi. Da zarar RED LED yana ci gaba da kunnawa, WPG-1 na iya karɓar bayanai daga mita. Green LED akan tsarin Wifi zai yi haske sau 7 kowane daƙiƙa 8 don nuna cewa ana karɓar bayanai daga mita. Idan ba a sami ingantacciyar sadarwa daga mita a cikin shirin sake saiti ba, tsarin WPG-_AP WiFi zai koma neman mita, kuma LED ɗin zai yi haske sau ɗaya a cikin daƙiƙa uku. Idan ba a ci gaba da kunna ta ba, to ba a tanadar ta daidai da na'urar mai amfani ba, mitar mai amfani ba ta da wutar lantarki ko babu ta hanyar WiFi, ko wata matsala ta riga-kafin tanadin. Kar a ci gaba har sai an kammala wannan matakin cikin nasara.
Matsayin Sadarwar Module WiFi LEDs
Bayan wutar lantarki, YELLOW Comm LED ya kamata ya haskaka yana nuna cewa an shigar da tsarin mai karɓar WiFi daidai, farawa da sadarwa tare da na'ura ta WPG-1. Bayan nasarar kammala haɗin gwiwar, GREEN Comm LED ya kamata ya fara kiftawa sau ɗaya kowane 8 zuwa 9. Wannan yana nuna cewa an karɓi ingantaccen watsawa ta tsarin mai karɓa kuma an yi nasarar isar da shi zuwa na'urar sarrafa WPG-1. The Green Comm LED zai ci gaba da kiftawa sau ɗaya kowane 8-9 daƙiƙa ci gaba muddin an haɗa mita zuwa WPG-1. Idan Green Comm LED ba ta kiftawa ba, wannan alama ce cewa ba a karɓar watsa bayanai daga mitar, na iya lalacewa, ko ta wata hanya ba ingantaccen watsawa ba. Idan Green Comm LED ya kasance yana kyalkyali da aminci kowane daƙiƙa 8-9 na ɗan lokaci, sannan ya tsaya na ɗan lokaci sannan kuma ya sake farawa, wannan yana nuna cewa watsa shirye-shiryen ba su da ɗan lokaci kuma lokaci-lokaci, ko kuma gabaɗaya yana nufin akwai matsala a cikin ikon mai karɓar WiFi. don karɓar bayanai amintacce daga mita. Don gyara wannan, canza kusancin WPG-1 zuwa mita, matsar da shi kusa da mita idan zai yiwu kuma kawar da duk wani shinge na ƙarfe tsakanin mita da WPG-1. Hakanan duba don tabbatar da cewa duk wani bango ko shinge tsakanin WPG-1 da mita suna da ƙaramin ƙarfe a cikinsu gwargwadon yiwuwa. A wasu aikace-aikace WPG-1 na iya buƙatar layin-ganni tare da mita.
Fitar bugun jini
Ana iya saita abubuwan da aka fitar don su kasance a cikin Yanayin Toggle (Form C) 3-Wire yanayin ko Kafaffen (Form A) 2-Way Yanayin. Gabaɗaya magana, ana iya amfani da yanayin Form C tare da na'urori masu karɓar bugun jini na 2-Wire ko 3-Wire, yayin da yanayin Form A yana amfani da ƙirar 2-Wire kawai zuwa na'urar bugun jini (karɓi). Zaɓin zai dogara da aikace-aikacen da tsarin bugun bugun da ake so wanda na'urar karba ta fi son gani.
WPG-1 zai "yaɗa" bugun jini a cikin lokaci na biyu na 10 na gaba idan an karɓi ƙimar sa'a mai yawa a cikin watsawa don buƙatar samar da bugun jini fiye da ɗaya. Don misaliample, a ɗauka cewa kuna da ƙimar Pulse Pulse na 10 da aka zaɓa. Watsawar bayanai na sakan 8 na gaba yana nuna cewa an cinye 24 wh. Tun da awanni 24 watt ya wuce saitin ƙimar bugun bugun watt-hour, dole ne a samar da bugun jini guda biyu. Za a haifar da bugun jini na 10wh na farko nan da nan. Kusan daƙiƙa 10-4 daga baya za a haifar da bugun jini na 5wh na biyu. Ragowar sa'o'in watt hudu yana tsayawa a cikin rijistar makamashi mai tara (AER) yana jiran watsawa na gaba da ƙimar makamashin wannan watsa don ƙarawa cikin abubuwan da ke cikin AER. Wani example: ɗauka 25 wh/p Fitar Pulse Value. Bari mu ce watsa na gaba shine awanni 130 watt. 130 ya fi 25 girma, don haka za a fitar da bugun jini 5 a cikin daƙiƙa 7 masu zuwa, kusan ɗaya kowane sakan 1.4 (7 seconds / 5 = 1.4 seconds). Sauran 5 wh zai zauna a cikin AER yana jiran watsawa na gaba. Wasu gwaji da kuskure ƙila a yi don kowane gini na musamman tunda ƙimar bugun bugun jini zai canza dangane da matsakaicin nauyi.
Fitar bugun bugun jini (babu)
Idan tsarin mai karɓa yana karɓar bayanai daga mita kuma yana wucewa zuwa na'ura ta WPG-1, to ya kamata ku ga Red (da Green a cikin yanayin fitarwa na C) fitarwa na LED a duk lokacin da aka zaɓa ƙimar bugun jini, kuma processor yana haifar da bugun jini. Idan ƙimar fitarwar bugun jini ya yi yawa kuma bugun jini ya yi jinkiri sosai, shigar da ƙaramin ƙimar bugun jini. Idan ana haifar da bugun jini da sauri, shigar da ƙimar fitarwa mafi girma. Matsakaicin adadin bugun jini a cikin daƙiƙa guda a cikin yanayin jujjuyawar shine kusan 10, wanda ke nufin lokacin buɗewa da rufewar fitarwa kusan 50mS kowanne a cikin yanayin juyawa. Idan lissafin da na'urar sarrafa WPG-1 ya kasance don lokacin fitarwar bugun jini wanda ya wuce bugun bugun jini 15 a cikin dakika 1, WPG-1 zai haskaka RED Comm LED, yana nuna kuskuren ambaliya, kuma darajar bugun bugun ta yi kadan. An "latched" don a gaba da kuka kalli WPG-XNUMX, RED Comm LED za a kunna. Ta wannan hanyar, zaku iya tantancewa da sauri idan ƙimar fitarwar bugun jini tayi ƙanƙanta. A cikin mafi kyawun aikace-aikacen, bugun jini ba zai wuce fiye da bugun jini ɗaya a sakan daya ba a cikakken buƙatu. Wannan yana ba da damar ƙimar bugun bugun jini na yau da kullun wanda kamar yadda zai yiwu yayi kama da ainihin fitowar bugun bugun jini na KYZ daga mita.
WPG-1 yana da nau'ikan nau'ikan C guda biyu masu zaman kansu (3-waya). Waɗannan ana yiwa lakabin K1, Y1, Z1 don fitarwa #1 da K2, Y2, Z2 don fitarwa #2. Ana iya sarrafa kowace fitarwa azaman fitarwar FORM C (3-Wire) ko FORM A (2-Wire). Idan ana sarrafa fitarwa a yanayin Form A, ana amfani da fitarwar KY.
Nau'in bugun jini
Akwai nau'ikan bugun jini guda shida: Wh, VARh ko VAh bugun jini, kowanne ko dai gwargwadon Isarwa ko Karɓa. WPG-1 yana da ikon fitar da biyu daga cikin waɗannan a lokaci guda akan abubuwan bugun bugun jini masu zaman kansu guda biyu. Wannan jagorar tana nufin bugun watt-hour, amma duk nassoshi game da bugun watt-hour gabaɗaya ana amfani da su ga sauran nau'ikan bugun jini guda biyu, sai dai in an lura da su. Wh Pulses: Wh bugun jini shine ainihin bangaren wutar lantarki na triangle mai ƙarfi. Wh bugun jini ana amfani dashi don samun kW. Tun da pulses suna samuwa kai tsaye daga mitar mai kunna WiFi, ana ƙara ƙimar Wh na bugun jini zuwa AER duk lokacin da aka karɓi bugun bugun jini. Lokacin da aka riga aka ƙaddara ƙimar bugun bugun jini, ana fitar da bugun bugun Wh akan abin da aka sanya. VARh Pulses: VARh bugun jini shine sashin wutar lantarki na triangle mai ƙarfi. Ana amfani da bugun jini na VARh don samun VAR. Tunda ana samun bugun VARh kai tsaye daga mitar da ke kunna WiFi, ana ƙara ƙimar VARh a cikin AER duk lokacin da aka karɓi bugun bugun jini. Lokacin da aka riga aka ƙayyade ƙimar bugun bugun jini, ana fitar da bugun bugun VARh akan abin da aka sanya.
Vah Pulses: Vah bugun jini sune zahirin bangaren wutar lantarki na triangle mai iko. Ana amfani da bugun jini na Vah don samun VA's. Tun da bugun jini na Vah yana samuwa kai tsaye daga mitar da aka kunna WiFi, ana ƙara ƙimar Vah na bugun jini zuwa AER duk lokacin da aka karɓi bugun bugun jini. Lokacin da aka riga aka ƙaddara ƙimar bugun bugun jini, ana fitar da bugun kVAh akan abin da aka sanya.
Yana da mahimmanci ka zaɓi daidai nau'in fitarwar bugun jini. Madaidaicin nau'in fitarwar bugun jini zai dogara ne akan tsarin lissafin ku daga mai amfani da abin da kuke son amfani da bugun jini don. Idan kuna yin sarrafa buƙatu kuma ana cajin buƙatar ku a cikin kW's to kuna son amfani da bugun jini na Wh. Sabanin haka, idan an biya ku don buƙatu a cikin kVA, to kuna so ku zaɓi ɓangarorin Vah. Idan kuna sarrafa ikon sarrafa wutar lantarki, kuna iya buƙatar bugun jini na Wh akan fitarwa ɗaya da bugun VARh akan ɗayan fitarwa. Tuntuɓi mai amfani da ku ko Kayayyakin Jiha masu ƙarfi don tallafin fasaha.
Yawaita Fitar
Kamar yadda aka ambata a baya, idan akwai wasu pults da yawa da aka lissafa su a cikin tazara mai shekaru 6-7 fiye da WPG-1 na iya samar da ba da izinin dakatar da wasan. A cikin wannan yanayin, kawai ƙara ƙimar fitarwa ta hanyar shigar da lamba mafi girma a cikin akwatin ƙimar Pulse, sannan danna. . An yi nufin wannan LED ɗin don sanar da mai amfani cewa an yi asarar wasu bugun jini kuma ana buƙatar ƙimar bugun jini mafi girma. Yayin da aka ƙara kaya zuwa gini a kan lokaci, akwai yuwuwar hakan na iya faruwa, musamman idan ƙimar bugun jini ya yi ƙanana. Tabbatar yin la'akari da wannan idan / lokacin da kuka ƙara kaya zuwa ginin. Idan yanayin kuskure ya faru, saita ƙimar Pulse Output don ƙimar Wh wanda ya ninka ƙimar bugun bugun yanzu. Ka tuna don canza bugun bugun na'urar karɓar ku kuma, tunda bugun jini yanzu zai zama darajar ninki biyu. Ƙarfin kewayawa zuwa WPG-1 don sake saita RED Comm LED bayan haɓaka ƙimar bugun jini.
Aiki tare da WPG-1 RELAY
HANYOYIN AIKI: WPG-1 Mita Pulse Generator yana ba da damar daidaita abubuwan da ake fitarwa a cikin ko dai "Toggle" ko "Kafaffen" yanayin fitarwar bugun jini. A cikin yanayin Juyawa, abubuwan da ake fitarwa suna canzawa ko juyawa baya da gaba tsakanin ci gaba da KY da KZ duk lokacin da aka haifar da bugun jini. Wannan yayi daidai da na al'ada 3-Wire Pulse metering kuma yana kwaikwayon ƙirar SPDT. Hoto na 1 da ke ƙasa yana nuna zanen lokaci don yanayin fitarwa na "Toggle". KY da KZ rufewa ko ci gaba suna gaba da juna. A wasu kalmomi, lokacin da aka rufe tashoshin KY (a kunne), tashoshin KZ suna buɗe (kashe). Wannan yanayin ya fi dacewa don bugun bugun jini don samun buƙatu ko ana amfani da wayoyi na zahiri 2 ko 3 zuwa na'ura ko tsarin ƙasa (ƙarar bugun bugun jini).
A cikin Kafaffen yanayin fitarwa, wanda aka nuna a Hoto na 2 a ƙasa, bugun fitarwa (KYAUTA kawai) shine tsayayyen nisa (T1) duk lokacin da aka kunna fitarwa. Faɗin bugun bugun jini (lokacin rufewa) an ƙaddara ta hanyar saitin umarni na Pulse Width (W). Wannan yanayin ya fi dacewa don tsarin ƙidayar makamashi (kWh) amma maiyuwa bazai zama mafi kyau ga tsarin sarrafa buƙatun ba inda ake ɗaukar bugun jini don samun buƙatar kW nan take. Ba a amfani da fitowar KZ a cikin yanayin al'ada/daidaitacce.
*Idan an saita fitarwa don Form A pulses ba a amfani da fitowar KZ. A cikin hoto na 2 a sama, an kashe fitowar KZ, don haka ba ya nuna bugun jini.
Tuntuɓi masana'anta don tallafin fasaha a (970)461-9600.
Shirye-shiryen WPG-1
Saita Saitunan WPG-1
Saita ƙimar bugun jini na WPG-1, mai ninka mita, yanayin fitarwar bugun jini, nau'in bugun jini da lokacin bugun jini ta amfani da tashar tashar shirye-shirye ta USB [Nau'in B] akan allon WPG-1. Ana saita duk saitunan tsarin ta amfani da tashar USB Programming Port. Zazzage software na SSI Universal Programmer samuwa azaman zazzagewa kyauta daga SSI website. A madadin, ana iya tsara WPG-1 ta amfani da shirin tasha kamar TeraTerm. Dubi "Kafa Serial Port" a shafi na 9.
Farawa Mai Shirye-shirye
Kafin fara shirin haɗa kebul na USB tsakanin kwamfutarka da WPG-1. Tabbatar cewa an kunna WPG-1. Danna gunkin SSI Universal Programmer akan tebur ɗin ku don fara shirin. A kusurwar hagu na sama za ku lura da LED simulated guda biyu Green, ɗayan yana nuna cewa kebul na USB yana haɗa ɗayan ɗayan kuma an haɗa WPG-1 zuwa mai tsara shirye-shirye. Tabbatar cewa duka LED's suna "littafi" .
Mita Multiplier
Idan ginin da kake shigar da WPG-1 akansa yana da mitar lantarki "Instrument-Rated", dole ne ka shigar da Multiplier Mita zuwa shirin WPG-1. Idan mitar na'urar lantarki ce ta "Cin Kai", Mai Girman Mita shine 1.
Idan ƙayyadaddun ƙayyadaddun ma'aunin wutar lantarki na wurin kayan aiki ne, ƙididdige yawan mitar. A cikin ƙayyadaddun ƙayyadaddun ƙididdiga na kayan aiki, mai ninka mita yawanci shine rabo na Transformer na yanzu ("CT"), amma kuma zai haɗa da Ratio mai yuwuwar Transformer ("PT"), idan ana amfani da PT, yawanci akan manyan aikace-aikace kawai. Na 800 Amp ku 5 Amp Transformer na yanzu, don misaliample, yana da rabo na 160. Saboda haka, yawan mita akan ginin da 800: 5A CT's zai zama 160. Ana buga Meter Multiplier akan lissafin amfani na abokin ciniki na kowane wata. Idan ba za ku iya samunsa ba, kira mai amfaninku kuma ku tambayi menene mita ko yawan lissafin kuɗi. Don tsara Multiplier a cikin WPG-1, shigar da madaidaicin Multiplier a cikin Mita
Mai yawa akwatin kuma danna . Duba babban allon shirin a shafi na 10.
Nau'in bugun jini
Nau'in Pulse don Fitowa 1 Fitowa 2 an saita su daban-daban. Nau'in bugun jini na fitarwa shine Watt-hours (ikon gaske), VAR-hours (ikon amsawa) ko VA-hours (a fili ikon), kowanne kamar yadda ake bayarwa ko Karɓa. Zaɓi zaɓin da ya dace a cikin menu na saukarwa don Nau'in Fitarwa na 1 da Nau'in fitarwa na 2 kuma danna . Dubi Shafi na 4 don bayanin nau'ikan bugun jini.
Darajar Pulse
Darajar Pulse Pulse ita ce adadin watt-hours wanda kowane bugun jini yana da daraja. Ana iya saita WPG-1 daga 1 Wh zuwa 99999 Wh kowace bugun jini. Zaɓi ƙimar bugun bugun da ta dace don aikace-aikacen ku. Kyakkyawan farawa shine 100 Wh / bugun jini don manyan gine-gine da 10 Wh / bugun jini don ƙananan gine-gine. Kuna iya daidaita shi sama ko ƙasa kamar yadda ake buƙata. Manyan wurare za su buƙaci ƙimar bugun jini mai girma don kiyayewa daga wuce gona da iri na rijistar WPG-1. Shigar da lambar a cikin akwatin ƙimar Pulse kuma danna . ** NOTE ***: Idan darajar bugun bugun jini da kuke buƙata an bayyana shi azaman Kilowatt-hours (kWh), ninka ƙimar kWh bugun jini da 1000 don daidai ƙimar watthour, idan an zartar.
Fitar fitarwa
WPG-1 yana ba da damar ko dai yanayin jujjuyawar gado na 3-Wire (Form C) ko Yanayin Kafaffen 2-Wire (Form A). Yanayin juzu'i shine yanayin fitarwar bugun jini na yau da kullun wanda yayi kwaikwayon daidaitaccen fitowar mitar lantarki na KYZ 3-Wire. Yana jujjuyawa baya da gaba, zuwa kishiyar jihar, duk lokacin da WPG-1 ke haifar da “buga”. Ko da yake akwai wayoyi guda uku (K, Y, & Z), yana da amfani don amfani da K da Y, ko K da Z, don yawancin tsarin waya guda biyu waɗanda ke buƙatar ko sha'awar bugun jini na yau da kullum na 50/50 a kowane lokaci. aka ba lokaci. Ana amfani da yanayin jujjuya don tsarin da ke yin sa ido da sarrafawa da buƙatu kuma suna buƙatar sarari akai-akai ko bugun jini na “simmetrical”. Idan kana cikin FORM C Toggle Output pulse yanayin, kuma na'urar karɓar bugun jini tana amfani da wayoyi biyu kawai, kuma na'urar karɓar bugun jini kawai tana ƙididdige ma'amalar fitarwa azaman bugun bugun jini (ba buɗewa ba), to.
3-Kimar bugun bugun waya dole ne a ninka sau biyu a cikin Na'urar Karɓar bugun jini. LEDs masu fitar da ja da kore suna nuna matsayin fitarwar bugun jini. Dubi ƙarin bayani a shafi na 5. Yi amfani da akwatin Fitarwa, zaɓi "C" a cikin jakunkuna kuma danna .
Yi amfani da akwatin Fitarwa don shigar da "A" don zaɓar FORM A Kafaffen yanayin. A cikin Kafaffen yanayin, fitarwar KY kawai ake amfani dashi. Wannan shi ne daidaitaccen tsarin 2-Wire inda lambar sadarwa ta al'ada ke buɗewa har sai lokacin da bugun jini ya haifar. Lokacin da bugun bugun jini ya haifar, ana rufe lambar sadarwa don ƙayyadaddun tazarar lokaci, a cikin millise seconds, zaɓi a cikin akwatin Form A Nisa. Yanayin Form A gabaɗaya yana da alaƙa da tsarin aunawa makamashi (kWh). Zaɓi "A" a cikin akwatin cirewa Form na fitarwa kuma danna .
Saita Fom ɗin Faɗin bugun bugun jini (Lokacin Rufewa)
Idan kana amfani da WPG-1 a cikin Form A (Kafaffen) Mode, saita fitarwa lokacin rufewa ko bugun bugun jini, zažužžukan a 25mS, 50mS, 100mS, 200mS, 500mS ko 1000mS (1 seconds) ta amfani da Form A Nisa akwatin. Bayan bugun bugun jini, tashoshin KY na kowane fitarwa za su rufe don adadin da aka zaɓa na millise seconds kuma su haskaka LED Output LED kawai. Wannan saitin yana aiki ne kawai ga yanayin fitarwar Form A, kuma baya shafar yanayin fitarwa. Yi amfani da mafi ƙarancin lokacin ƙulli mai yuwuwa wanda abin dogaro zai karɓi ta kayan aikin bugun bugun jini, don kar a iyakance madaidaicin ƙimar bugun jini ba dole ba. Zaɓi faɗin bugun bugun da ake so daga ƙasan ƙasa a cikin akwatin Faɗin A Form kuma danna .
Algorithm Daidaita Makamashi
WPG-1 yana ƙunshe da ingantaccen ingantaccen makamashi na daidaitawa algorithm wanda ke lura da jimillar adadin kuzarin da aka samu a cikin watsawa daga mitar da kuma yawan adadin kuzarin da aka wakilta ta bugun jini da aka samar. Sau ɗaya a sa'a guda, ana kwatanta dabi'u biyu kuma ana yin gyare-gyare idan ya cancanta don haɓaka ƙarfin da bugun jini ke wakilta zuwa ƙarfin da aka ruwaito daga mita. Saita akwatin Daidaita Makamashi zuwa An kunna kuma danna . Da zarar an kunna, danna kan don share duk wani tsohon bayani a cikin rijistar EAA na WPG-1.
Module Monitor Modes
Akwai hanyoyin karantawa guda uku akan WPG-1: Na al'ada, Echo da EAA. Wannan yana ƙayyade bayanan da aka nuna a cikin akwatin saka idanu a gefen dama na allon lokacin da kake cikin yanayin saka idanu. Yanayin al'ada shine tsoho kuma yana nuna maka lokacin stamp, Bukatar, mai yawa na ciki da mai rarrabawa da ke fitowa daga mita kowane sakan 8. Zaɓi Al'ada a cikin akwatin Module kuma danna .
Yanayin Echo yana ba ku damar view gaba dayan kirtani na watsawa suna fitowa daga mita kamar yadda microcontroller na WPG1 ke karba daga dongle a tsarin ASCII. Wannan yanayin na iya zama da amfani wajen magance matsala a cikin lamarin watsawa ta tsaka-tsaki daga mita. Zaɓi Echo a cikin akwatin Yanayin Dongle kuma danna
Ma'auni>.
Yanayin EAA yana ba ku damar view gyare-gyaren da aka yi ta hanyar Algorithm Daidaita Makamashi. Wannan yanayin na iya zama da amfani wajen lura da sau nawa ana daidaita Rijistar Makamashi bisa bambance-bambance tsakanin adadin bugun da aka fitar da kuzarin da aka tara daga watsawa daga mita. Karatu a cikin wannan yanayin yana faruwa da wuya don haka ana iya ɗaukan cewa babu abin da ke faruwa. Zaɓi EAA a cikin akwatin Yanayin Dongle kuma danna .
Ana karantawa duk Ma'auni na Shirye-shirye
Zuwa view dabi'un duk saitunan da ake iya tsarawa waɗanda a halin yanzu aka tsara su cikin WPG-1, danna kan .
Kebul na serial link zai dawo da darajar kowane saiti na yanzu idan an haɗa ku zuwa WPG-1 tare da SSI Universal Programmer software.
Sake saita Duk Saituna zuwa Tsoffin Factory
Idan ka ga cewa kana so ka sake saita duk sigogi a mayar da su zuwa ga ma'aikata Predefinicións, kawai ja saukar da file menu kuma zaɓi “Sake saita Tsoffin Factory. Siffofin da ke biyo baya za su koma ga saitunan masana'anta kamar haka:
Mai yawa: 1
Darajar Pulse: 10 Wh
Viewa cikin Firmware Version
Ana nuna sigar firmware a cikin WPG-1 a kusurwar hannun hagu na sama na SSI Universal Programmer, kuma zai karanta wani abu makamancin haka: An haɗa ku zuwa: WPG1 V3.02
Kula da WPG-1 ta amfani da SSI Universal Programmer
Baya ga tsara WPG-1, kuna iya saka idanu kan hanyoyin sadarwa ko bayanan da ake karɓa daga tsarin WiFi. Zaɓi yanayin a cikin akwatin Module kuma danna kamar yadda aka nuna a sama.
Da zarar kun yi zaɓin yanayin ƙirar, danna maɓallin Monitor. Gefen hagu na SSI Universal Programmer za a yi launin toka sannan akwatin Kulawa a gefen dama na taga zai fara nuna watsawa duk lokacin da aka karɓa. Ba za ku iya canza saitunan WPG-1 ba yayin da SSI Universal Programmer ke cikin yanayin Kulawa. Don komawa zuwa yanayin shirye-shirye, danna maɓallin Tsaya Kulawa.
Iyawar Ƙarshen Tazara
Yayin da firmware na WPG-1 yana da tanadi don bugun bugun Ƙarshen-tsaka-tsaki, kayan aikin WPG-1 ba ya goyan bayan wannan fasalin kai tsaye. Saita akwatin tazara zuwa tsayin tazara da tsayin bugun bugun da ake so kuma danna kan . Idan kuna buƙatar ƙarfin fitarwa na ƙarshen tazara, ziyarci SSI webrukunin yanar gizon kuma tuntuɓi Solid State Instruments division na Brayden Automation Corporation.
Shirye-shirye tare da Tsarin Tasha
Idan ba za ku iya amfani da software na SSI Universal Programmer don tsara WPG-1 ba, kuma ana iya tsara ta ta amfani da shirye-shiryen tasha kamar Tera Term, Putty, Hyperterminal ko ProComm. Saita ƙimar baud don 57,600, 8 bit, 1 tasha bit kuma babu daidaito. Tabbatar cewa an saita karɓa don CR+LF kuma an kunna Echo na gida.
Jerin Dokokin WPG-1 (?)
Don taimako a zaɓi ko amfani da jerin umarni tare da WPG-1, kawai danna ? key. Serial mahada a kan WPG-1 zai dawo da cikakken jerin umarni.
mXXXX ya da MXXXX - Saita mai yawa (XXXXX shine 1 zuwa 99999).
'pXXX ya da PXXX - Saita ƙimar bugun jini don fitarwa 1: Wattours, VARhours, VAhours (XXXX shine 0 zuwa 99999)
'qXXX ya da QXXXX - Saita ƙimar bugun jini don fitarwa 2: Wattours, VARhours, VAhours (XXXX shine 0 zuwa 99999)
'jX da JX - Saita Nau'in Pulse, Fitowa 1 (X shine 0-6). 0-Nakasassu, 1-Watthours-Bayarwa; 2-Watthours-An Karba; 3VARhours-Bayar da; 4-VARhours-An karɓa, 5-VARhours-Bayar da; 6-Vahours-An karɓi 'kX ko 'KX - Saita Nau'in Pulse, Fitowa 2 (X shine 0-6). 0-Nakasassu, 1-Watthours-Bayarwa; 2-Watthours-An Karba;
3VARhours-Bayar da; 4-VARhours-An karɓa, 5-VARhours-Bayar da; 6-Vahours-An Karba
'c0 ko C0 ' - Yanayin Fitowar Pulse Form C An Kashe Fitowa 1 (Hanyar Fitarwa)
'c1 ko 'C1 ' - Yanayin Fitowar Pulse Form C An Kunna Fitowa 1 (Yanayin Fitar da Form C)
' b0 da 'B0 ' - Yanayin Fitowar Pulse Form C An Kashe Fitowa 2 (Hanyar Fitarwa)
'b1 ko 'B1 ' - Yanayin Fitar Pulse Form C An kunna Fitowa 2 (Yanayin fitarwa na Form C)
'o0 ko 'O0 '- Sake saita Odometer akan Fitarwa
#1'o1 ko 'O1 '- Sake saita Odometer akan Fitowa #2
d0 da 'D0 '- Kashe yanayin Module
'd1 da 'D1 '- Saita cikin Yanayin Al'ada na Module
'd2 da 'D2 '- Saita cikin Module Echo yanayin
da wX ko 'WX - Saita Kafaffen Yanayin Pulse (X shine 0-5). (Duba ƙasa)
'eX ' ya da' EX '- Saita Ƙarshen Tazara, (X shine 0-8), 0-An kashe.
'iX ' da' IX '- Saita Tsawon Tazarar, (X shine 1-6)
'KODYYRHRMNSC '- Saita Kalanda na agogo na ainihi, MO-wata, Ranar DY, da sauransu.
'tXXX ya da TXXX - Saita lokacin sake saiti, daƙiƙa (XXX shine 60 zuwa 300).
'z ' da 'Z '- Saita Tsoffin Factory
'v ' ko 'V '- Query Firmware version
'r ko 'R '- Karanta sigogi.
Form A (Kafaffen) Nisa na bugun jini
da wX ko 'WX '- Nisa Pulse, millise seconds - 25 zuwa 1000mS, 100mS tsoho; (Ya shafi abubuwan da aka fitar guda biyu)
Samar da Zaɓuɓɓukan Nisa na Pulse:
da w0 da W0 '- 25mS Rufewa
da w1 da W1 '- 50mS Rufewa
da w2 da W2 '- 100mS Rufewa
da w3 da W3 '- 200mS Rufewa
da w4 da W4 '- 500mS Rufewa
da w5 da W5 '- 1000mS Rufewa
Ɗaukar bayanai tare da SSI Universal Programmer
Hakanan yana yiwuwa a shiga ko ɗaukar bayanai ta amfani da SSI Universal Programmer. Lokacin da aka kunna aikin shiga, za a iya shigar da bayanan da aka karɓa daga Module ko mita zuwa a file. Wannan zai taimaka wajen ƙoƙarin warware matsalolin haɗin kai. Danna menu na Ɗauka kuma zaɓi saitin. Sau ɗaya a file An tsara suna da kundin adireshi, danna Fara Kama. Don ƙare Logging, danna kan Tsaya Kama.
SSI Universal Programmer
SSI Universal Programmer mai amfani ne na tushen windows don WPG Series da sauran samfuran SSI. Zazzage SSI Universal Programmer daga SSI websaiti a www.solidstateinstruments.com/sitepages/downloads.php. Akwai iri biyu don saukewa:
Windows 10 da Windows 7 64-bit Version 1.2.0.0
Windows 7 32-bit V1.2.0.0
Idan kana amfani da Windows 7, fara duba kwamfutarka don tabbatar da cewa ka sauke sigar da ta dace.
KAYAN KAYAN JIHAR MULKI
Abubuwan da aka bayar na Brayden Automation Corp.
6230 Aviation Circle, Loveland, Colorado 80538
Waya: (970)461-9600
Imel: support@brayden.com
Takardu / Albarkatu
 |
KAYAN KAYAN JIHAR KARFIN WPG-1 Generator Pulse Metering [pdf] Jagoran Jagora WPG-1 Ma'aunin bugun jini Generator, WPG-1, Ma'aunin bugun jini Generator, Generator, Pulse Generator |
