SMARTEH LPC-2.O16 Mai Kula da Shirye-shiryen

Ƙayyadaddun bayanai

• Model: Longo mai sarrafa shirye-shirye LPC-2.O16
• Shafin: 5
• Module na fitarwa: Transistor Output
• Wutar lantarki: 24V DC
• Abubuwan da aka fitar: 16 PNP transistor abubuwan da aka fitar
• Warewa: Galvanic keɓe
• Kariya: Kariyar yanzu
• hawa: DIN EN50022-35 dogo hawa

Umarnin Amfani da samfur

Bayani
LPC-2.O16 daidaitaccen 24 V DC na dijital fitarwa module tare da 16 na yanzu da kariya da galvanic keɓewar transistor PNP. Ya dace da ayyuka masu yawa da kuma fasalulluka na LED don nuna alamun aiki akan abubuwan da aka fitar.

Siffofin

• 16 daidaitaccen kayan aikin dijital na PNP transistor
• Galvanic keɓe
• Kariyar yanzu
• Fitarwa mai sassauƙa don amfani mai faɗin aiki
• Ƙananan girma da daidaitattun DIN EN50022-35 hawan dogo

Shigarwa

Tsarin Haɗi

• Ana Bayar da Ciki:
  
• Ana bayarwa na waje:
  

FAQ (Tambayoyin da ake yawan yi)

Tambaya: Menene zan yi idan an kunna kariyar yanzu akan fitarwa?
A: Idan an kunna kariyar na yanzu akan kayan fitarwa, kashe kayan aikin dijital daga babban ɓangaren software na aikace-aikacen. Idan batun ya ci gaba, bincika dalilai masu yuwuwa kamar haɗin fitarwa mara kyau, gajeriyar kewayawa, gajeriyar kaya, ko babban ƙarfin da aka haɗa da fitarwa.

MANHAJAR MAI AMFANI
Longo mai sarrafa shirye-shirye LPC-2.O16
Transistor Output module

Written by SMARTEH doo Copyright © 2016, SMARTEH doo
Manual mai amfani
Sigar fayil: 5
Yuli, 2023

MATSAYI DA ARZIKI: Ma'auni, shawarwari, ƙa'idoji da tanadi na ƙasar da na'urorin za su yi aiki, dole ne a yi la'akari da su yayin tsarawa da kafa na'urorin lantarki. Yi aiki akan 100 .. 240 V AC cibiyar sadarwa an ba da izini ga ma'aikata masu izini kawai.

GARGAƊAN HADARI: Dole ne a kiyaye na'urori ko kayayyaki daga danshi, datti da lalacewa yayin jigilar kaya, adanawa da aiki.
SHARUDAN GARANTI: Don duk nau'ikan LONGO LPC-2 - idan ba a yi gyare-gyare ba kuma an haɗa su daidai ta hanyar ma'aikata masu izini - la'akari da iyakar ikon haɗin haɗin da aka yarda, garanti na watanni 24 yana aiki daga ranar sayarwa zuwa mai siye na ƙarshe, amma bai wuce ba. Watanni 36 bayan haihuwa daga Smarteh. Idan akwai da'awar a cikin lokacin garanti, waɗanda suka dogara da lalacewar kayan aiki mai ƙira yana ba da canji kyauta. Hanyar dawo da ma'auni mara aiki, tare da bayanin, ana iya shirya tare da wakilin mu mai izini. Garanti baya haɗawa da lalacewa ta hanyar sufuri ko saboda ƙa'idodin da ba a kula da su ba na ƙasar, inda aka shigar da tsarin.
Dole ne a haɗa wannan na'urar da kyau ta tsarin haɗin da aka bayar a cikin wannan jagorar. Rashin haɗin kai na iya haifar da lalacewar na'urar, wuta ko rauni na mutum.
Hadari voltage a cikin na'urar na iya haifar da girgiza wutar lantarki kuma yana iya haifar da rauni ko mutuwa.

KADA KA KADA KA YIWA WANNAN KYAMAR HIDIMAR!
Kada a shigar da wannan na'urar a cikin tsarin da ke da mahimmanci ga rayuwa (misali na'urorin likitanci, jiragen sama, da sauransu).
Idan an yi amfani da na'urar ta hanyar da masana'anta ba ta ayyana ba, ƙimar kariyar da kayan aikin ke bayarwa na iya lalacewa.
Sharar gida da kayan lantarki (WEEE) dole ne a tattara su daban!

LONGO LPC-2 ya bi ka'idodi masu zuwa:

• EMC: EN 61000-6-3: 2007 + A1: 2011, EN 61000-6-1: 2007, EN 61000- 3- 2: 2006
• LVD: IEC 61010-1: 2010 (Ed. na uku), IEC 3-61010-2: 201 (Ed na farko)

Smarteh doo yana aiki da manufofin ci gaba da ci gaba. Don haka mun tanadi haƙƙin yin canje-canje da haɓakawa ga kowane samfuran da aka siffanta a cikin wannan jagorar ba tare da wani sanarwa na farko ba.

MULKI
SMARTEH doo
Poljubinj 114
5220 Tolmin
Slovenia

BAYANI

Ana amfani da LPC-2.O16 azaman ma'aunin fitarwa na dijital na 24 V DC. Module yana da kariya guda 16 na halin yanzu da kuma keɓaɓɓen kayan aikin transistor PNP. Ana iya amfani da shi a cikin aiki mai yawa.
LEDs suna nuna siginar aiki da ke kan abubuwan da aka fitar (koma zuwa Tebura 5).
Module yana aiki daga BUS na ciki ko 24V DC na waje wutar lantarki. Za a iya yin zaɓi tare da saiti biyu na masu tsalle.

NOTE: Idan akwai kariyar halin yanzu na fitowar dijital ɗaya ɗaya (babu voltage kan fitowar mutum ɗaya lokacin da aka kunna), kashe kayan aikin dijital daga babban ɓangaren aikace-aikacen software kuma bayan sake kunna shi. Idan har yanzu kariyar tana kan aiki, bincika menene dalilin wannan (haɗin fitarwa ba daidai ba, gajeriyar kewayawa daga fitarwa zuwa juzu'in tunanitage, loaded shorted, zuwa babban ƙarfin lodi da aka haɗa da fitarwa…).

SIFFOFI

 

Table 1: Bayanan fasaha

• 16 daidaitaccen kayan aikin dijital na PNP transistor
• Galvanic keɓe
• Kariyar yanzu
• Fitarwa mai sassauƙa don amfani mai faɗin aiki
• Ƙananan girma da daidaitattun DIN EN50022-35 hawan dogo

SHIGA

Tsarin haɗin gwiwa

Hoto 2: Tsarin haɗin kai don ciki

Hoto 3: Tsarin haɗin kai don kawowa a waje

1 Wayoyin da aka haɗa da tsarin dole ne su kasance da yanki na giciye aƙalla 0.75 mm2. Matsakaicin ma'aunin zafin jiki na rufin waya dole ne ya zama 85 ° C.

umarnin hawa

Hoto na 3: Girman gidaje

Girma a cikin millimeters.

Dole ne a yi duk haɗin haɗin kai, abubuwan haɗe-haɗe da haɗawa yayin da module ɗin ba a haɗa su da babban wutar lantarki ba.

umarnin hawa

1. Kashe babban wutar lantarki.
2. Dutsen LPC-2.O16 module zuwa wurin da aka bayar a cikin rukunin lantarki (DIN EN50022-35 hawan dogo).
3. Hana wasu kayayyaki na LPC-2 (idan an buƙata). Haša kowane nau'i zuwa dogo na DIN da farko, sannan ku haɗa kayayyaki tare ta hanyar haɗin K1 da K2.
4. Haɗa wayoyi masu fitarwa na dijital bisa ga tsarin haɗin kai a cikin Hoto 2.
5. Kunna babban wutar lantarki.

Sauke a bi da bi. Don hawawa / sauke kayayyaki zuwa / daga DIN dogo dole ne a bar sarari kyauta na aƙalla module ɗaya akan titin DIN.

NOTE: LPC-2 babban module ya kamata a kunna shi daban da sauran kayan lantarki da aka haɗa da tsarin LPC-2. Dole ne a shigar da wayoyi na sigina dabam daga wuta da babban voltage wayoyi daidai da ma'aunin shigarwar lantarki na masana'antu gabaɗaya.

Alamar ƙirar ƙira

Alamar 1 bayanin:

1. LPC-2.O16 shine cikakken sunan samfurin.
2. P/N:225O1610001001 shine lambar sashin.
   • 225 - babban lambar don dangin samfurin,
   • O16 - gajeren sunan samfurin,
   • 10001 - lambar jerin,
   • 10 - shekara ta bude code,
   • 001 - lambar yabo,
   • 001 - lambar sigar (wanda aka tanada don haɓaka HW da/ko SW na gaba).
3. D/C:22/10 shine lambar kwanan wata.
   • 22 - mako kuma
   • 10 - shekara ta samarwa.

Alamar 2 Bayani:

1. S/N: O16-S9-1000000190 shine serial number.
   • O16 - gajeren sunan samfurin,
   • S9 - lambar mai amfani (hanyar gwaji, misali Smarteh mutum xxx),
   • 1000000190 - shekara da lambar tari na yanzu,
   • 10 - shekara (na karshe biyu cyphers),
   • 00000190 - lambar tari na yanzu; Tsarin da ya gabata zai sami lambar tari 00000189 da na gaba 00000191.

BAYANIN FASAHA

CANJI

Tebur mai zuwa yana bayyana duk canje-canjen daftarin aiki.

Kwanan wata	V.	Bayani
30.06.10	1	Sigar farko, batutuwa kamar LPC-2.O16 module UserManual.
03.03.16	3	An sabunta hotuna da bayanin kula da wutar lantarki.
30.01.19	4	Technical updates.
18.07.23	5	Hoto na 3 da aka sabunta: Tsarin haɗin kai don kawowar waje.

Takardu / Albarkatu

SMARTEH LPC-2.O16 Mai Kula da Shirye-shiryen [pdf] Manual mai amfani LPC-2.O16 Mai Kula da Shirye-shiryen, LPC-2.O16, Mai Gudanar da Shirye-shiryen, Mai Sarrafa

Magana

• Manual mai amfani