AN690
SI4010 KIT KYAUTA JAGORAN GASKIYA
Manufar
Na gode don sha'awar ku ga kayan aikin haɓakawa na Silicon Laboratories Si4010 RF SoC. Wannan kayan haɓakawa ya ƙunshi duk abin da kuke buƙata don haɓaka software ɗinku tare da Si4010 da aka saka Si8051 MCU. Kit ɗin yana da nau'ikan nau'ikan guda uku: ɗaya don rukunin 434 MHz (P/N 4010-KFOBDEV-434), ɗaya don rukunin 868 MHz (P/N 010KFOBDEV-868) da ɗaya don rukunin 915 MHz (P/N 4010- KFOBDEV-915). Muhimman fasali na dandalin ci gaba sune kamar haka:
- Maɓallin ci gaba na maɓalli yana da maɓallin turawa guda biyar da LED ɗaya.
- Maɓallin ci gaba na fob yana da baturi don ba da damar cire haɗin kai daga allon dubawar shirye-shirye da fitarwar eriya ta SMA don ba da damar ma'aunin waya.
- Yana amfani da Silicon Laboratories Integrated Development Environment (IDE) don gyara software kuma yana iya amfani da Keil C compiler, mai haɗawa, da mahaɗa.
- Abubuwan mu'amala tare da dakunan gwaje-gwaje na Silicon USB Adaftar Debug ko Toolstick.
- Ya ƙunshi allon ci gaban maɓalli mai soket don kona ƙwaƙwalwar ajiyar OTP NVM. Ya ƙunshi allon karɓar Si4355 don gwajin haɗin gwiwa.
- Ya ƙunshi kwakwalwan kwamfuta NVM Si4010 mara komai guda uku da allon nuni na fob ba tare da IC don ƙonawa da gwada lambar mai amfani akan ainihin maɓalli na PCB ba.
Abun ciki Kit
Tebu na 1 ya jera abubuwan da ke cikin kits.
Tebur 1. Abubuwan Kundin Kit
| Qty | Lambar Sashe | Bayani |
| 4010-KFOBDEV-434 | Si4010 Key Fob Development Kit 434MHz | |
| 2 | 4010-KFOB-434-NF | Si4010 key fob demo allon 434 MHz w/o IC |
| 1 | MSC-DKPE1 | SOIC/MSOP soket na raya hukumar |
| 3 | Saukewa: Si4010-C2-GS | Si4010-C2-GS mai watsawa IC, Kunshin SOIC |
| 1 | 4010-DKPB434-BM | Si4010 MSOP key fob ci gaban hukumar 434 MHz, SMA |
| 1 | 4355-LED-434-SRX | Si4355 RFStick 434 MHz allon karɓa |
| 1 | MSC-PLPB_1 | Key Fob Filastik Case (mai launin toka mai launin toka) |
| 1 | MSC-BA5 | allon shirye-shirye |
| 1 | MSC-BA4 | Adaftar allo |
| 1 | Saukewa: EC3 | Adaftar Debug na USB |
| 1 | Toolstick_BA | Adaftan Tushen Kayan Aikin Kayan aiki |
| 1 | MSC-DKCS5 | Kebul na USB |
| 1 | Kebul na USB (USBA-USBA) | |
| 2 | AAA | AAA baturi |
| 2 | Farashin CRD2032 | CR2032 3V baturin tsabar kudin |
Tebur 1. Abubuwan Kundin Kit (Ci gaba)
| 4010- KFOBDEV-868 | Si4010 Key Fob Development Kit 868MHz | |
| 2 | 4010-KFOB-868-NF | Si4010 key fob demo allon 868 MHz w/o IC |
| 1 | MSC-DKPE1 | SOIC/MSOP soket na raya hukumar |
| 3 | Saukewa: Si4010-C2-GS | Si4010-C2-GS mai watsawa IC, Kunshin SOIC |
| 1 | 4010-DKPB868-BM | Si4010 MSOP key fob ci gaban hukumar 868 MHz, SMA |
| 1 | 4355-LED-868-SRX | Si4355 RFStick 868 MHz allon karɓa |
| 1 | MSC-PLPB_1 | Key Fob Filastik Case (mai launin toka mai launin toka) |
| 1 | MSC-BA5 | allon shirye-shirye |
| 1 | MSC-BA4 | Adaftar allo |
| 1 | Saukewa: EC3 | Adaftar Debug na USB |
| 1 | Toolstick_BA | Adaftan Tushen Kayan Aikin Kayan aiki |
| 1 | MSC-DKCS5 | Kebul na USB |
| 1 | Kebul na USB (USBA-USBA) | |
| 2 | AAA | AAA baturi |
| 2 | Farashin CRD2032 | CR2032 3V baturin tsabar kudin |
| 4010- KFOBDEV-915 | Si4010 Key Fob Development Kit 915MHz | |
| 2 | 4010-KFOB-915-NF | Si4010 key fob demo allon 915 MHz w/o IC |
| 1 | MSC-DKPE1 | SOIC/MSOP soket na raya hukumar |
| 3 | Saukewa: Si4010-C2-GS | Si4010-C2-GS mai watsawa IC, Kunshin SOIC |
| 1 | 4010-DKPB915-BM | Si4010 MSOP key fob ci gaban hukumar 915 MHz, SMA |
| 1 | 4355-LED-915-SRX | Si4355 RFStick 915 MHz allon karɓa |
| 1 | MSC-PLPB_1 | Key Fob Filastik Case (mai launin toka mai launin toka) |
| 1 | MSC-BA5 | allon shirye-shirye |
| 1 | MSC-BA4 | Adaftar allo |
| 1 | Saukewa: EC3 | Adaftar Debug na USB |
| 1 | Toolstick_BA | Adaftan Tushen Kayan Aikin Kayan aiki |
| 1 | MSC-DKCS5 | Kebul na USB |
| 1 | Kebul na USB (USBA-USBA) | |
| 2 | AAA | AAA baturi |
| 2 | Farashin CRD2032 | CR2032 3V baturin tsabar kudin |
Lura: Maimakon wannan allon, kayan haɓaka na 434 MHz na iya ƙunsar sigar eriyar pcb na wannan kwamiti mai suna Si4010 key fob development board 434 MHz (P/N 4010-DKPB_434).
Shigar da Software
Fakitin software da fakitin kayan haɓaka suna samuwa azaman zip file a kan Silicon Labs websaiti a http://www.silabs.com/products/wireless/EZRadio/Pages/Si4010.aspx a kan Tools tab. Fakitin software da aka bayar ya ƙunshi duk takaddun da fileAna buƙatar haɓaka aikace-aikacen mai amfani. Ya kuma ƙunshi exampaikace-aikace ta amfani da ayyukan API da maɓalli na fob demo aikace-aikacen.
Tsarin shugabanci na software examples shine kamar haka:
Kwafi tsarin kundin adireshi a cikin kundin adireshin da kuka zaɓa. Ana ba da shawarar kiyaye tsarin babban fayil ɗin Si4010_projects don ba da damar mai tarawa don nemo Si4010 gama gari. files. Kowane aikin yana da aikin * .wsp file a cikin babban fayil ɗin bin wanda ya ƙunshi duk saitunan IDE don aikin, gami da hanyar dangi na gama gari files.
Silicon Labs IDE Run
Zazzage Silicon Labs IDE (Integrated Development Environment) daga masu biyowa URL: http://www.silabs.com/products/mcu/Pages/SiliconLaboratoriesIDE.aspx kuma shigar da shi a kan kwamfutarka. Don gudanar da IDE na Silicon Labs, buɗe aikin *.wsp file.
Saita Hardware ta amfani da adaftar Debug na USB
Ana iya samun cikakken bayanin IDE da adaftar gyara kurakurai a cikin Jagorar Mai amfani da Kit ɗin Ci gaban Si4010.
An haɗa allon da aka yi niyya zuwa PC mai aiki da Silicon Laboratories IDE ta USB Debug Adapter kamar yadda aka nuna a hoto 9.
Yi matakai masu zuwa don saita adaftar kuskure:
- Haɗa Adaftar Debug na EC3 zuwa mai haɗin J2 akan allon adaftar ƙonewa tare da ribbon-pin 10.
na USB. - Haɗa ƙarshen kebul na USB ɗaya zuwa mai haɗin USB akan Adaftan Debug na USB.
- Haɗa dayan ƙarshen kebul na USB zuwa tashar USB akan PC.
- Sake saita firmware na adaftar Debug ta hanyar aiwatar da aikace-aikacen da ke biyowa: \ Silabs_IDE\usb_debug_adapter_firmware_reset.exe (Wannan aikin yana buƙatar yin sau ɗaya kawai ta adaftar Debug na USB kafin a iya amfani da sabon sigar IDE.)
- Run Silabs_IDE\ide.exe
A karon farko da shirin IDE ya fara aiki, zai sabunta firmware daidai don adaftar ta atomatik.
Lura: Cire wuta daga allon da aka yi niyya da Adaftar Debug na USB kafin haɗi ko cire haɗin kebul ɗin kintinkiri daga allon manufa. Haɗawa ko cire haɗin kebul lokacin da na'urori ke da ƙarfi na iya lalata na'urar da/ko Adaftar Debug na USB.
Haɗin Kayan Aikin Keil
Aikin files a cikin exampdon ɗauka cewa an shigar da sarkar kayan aikin Keil zuwa: C: \ Keil directory. Ana iya canza wurin sarƙar kayan aikin Keil cikin sauƙi a cikin Silabs IDE a cikin menu na Haɗin Sarkar Kayan aiki. Za a iya sauke nau'in kimantawa na Keil Toolchain daga Keil website, http://www.keil.com/. Wannan sigar kyauta tana da iyakacin lambar kB 2 kuma tana farawa lambar a adireshin 0x0800. Za a iya buɗe sigar ƙima ta kyauta ta Keil don zama nau'in 4k ba tare da iyakance sanya lamba ta bin umarnin da aka bayar a cikin bayanin aikace-aikacen "AN104: Haɗa Kayan aikin Keil 8051 cikin Silicon Labs IDE", wanda ke rufe haɗin keil Toolchain da sarrafa lasisi. Ana iya samun lambar buɗewa a cikin fakitin takaddun da aka ambata a cikin “3. Shigar da Software” a shafi na 5 na wannan takarda. Kuna iya nemo lambar buɗewa a cikin tushen babban fayil a cikin Keil_license_number.txt file. Tuntuɓi wakilin tallace-tallace na Silicon Laboratories ko mai rabawa don taimakon aikace-aikacen.
Abubuwan da aka sani
Akwai batun da ya danganci direban LED, wanda ke nuna kansa kawai a ƙarƙashin yanayi masu zuwa lokacin da duk sharuɗɗan uku suka gamsu:
- Matsayin shirye-shiryen na'urar shine masana'anta ko mai amfani. Ga waɗancan matakan, ana kunna ƙirar gyara kuskuren C2 bayan taya ta hanyar kullun.
- An cire haɗin na'urar daga Silicon Labs IDE. “An cire haɗin” ana nufin a ma’anar software (ba a zahiri ba) ta amfani da maɓallan Haɗa/Cire haɗin kan IDE, ko kuma na’urar tana gudanar da lambar mai amfani ta atomatik bayan boot ɗin ba tare da taɓa haɗawa da IDE ba.
- Na'urar tana aiki da lambar da ke kunna LED da kashewa.
Idan duk sharuɗɗan sun gamsu, bayan LED na farko ya yi ƙyalli lokacin da aka kashe LED ɗin, GPIO4 ya daina aiki kuma ba a iya ganin aikace-aikacen.
Idan matakin shirye-shiryen na'urar Run ne ko kuma na'urar gyara kuskuren C2 na cikin gida, babu matsala. Ana iya kunna LED ɗin kuma a kashe ba tare da shafar aikin GPIO4 na na'urar ba. Za a iya taƙaita batun kamar haka: A duk lokacin da aka kunna C2 debugging interface kuma ba a haɗa na'urar da IDE ba kuma LED ɗin yana kunna da kashewa, to GPIO4 zai daina aiki. Tunda, a cikin Yanayin Run, an kashe C2 bayan an gama aikin taya, GPIO4 bai shafe ba. Don haka, wannan batu yana shafar tsarin haɓaka software ne kawai kuma yana damun mai haɓakawa. Bayan an gama aikace-aikacen kuma an tsara guntu azaman Run, babu batun.
Akwai yuwuwar hanyoyin magance software da yawa; duba cikakkun bayanai a cikin jagorar mai amfani da kayan haɓaka maɓalli na fob na Si4010.
Studio Mai Sauki
Danna sau ɗaya zuwa kayan aikin MCU, takardu, software, ɗakunan karatu na lambar tushe da ƙari. Akwai don Windows, Mac da Linux! www.silabs.com/simplicity
 |
|||
| Fayil na MCU www.silabs.com/mcu |
SW/HW www.silabs.com/simplicity |
inganci www.silabs.com/quality |
Taimako da Al'umma al'umma.silabs.com |
Disclaimer
Dakunan gwaje-gwaje na Silicon suna da niyyar samarwa abokan ciniki sabbin, daidaito, da cikakkun bayanai na duk kayan aiki da kayayyaki waɗanda ke akwai don tsarin da masu aiwatar da software ta amfani da ko niyyar amfani da samfuran dakunan gwaje-gwaje na Silicon. Bayanin siffa, samuwan samfura da maɓalli, girman ƙwaƙwalwar ajiya, da adiresoshin ƙwaƙwalwar ajiya suna nufin kowace takamaiman na'ura, da sigogin “Na yau da kullun” da aka bayar suna iya bambanta kuma suna yi a aikace-aikace daban-daban. Aikace-aikace misaliampKadan da aka bayyana a nan don dalilai ne kawai. Dakunan gwaje-gwaje na Silicon suna da haƙƙin yin canje-canje ba tare da ƙarin sanarwa ba da iyakancewa ga bayanan samfur, ƙayyadaddun bayanai, da kwatancen nan, kuma baya bada garanti dangane da daidaito ko cikar bayanan da aka haɗa. Dakunan gwaje-gwaje na Silicon ba za su sami alhakin sakamakon amfani da bayanan da aka kawo a nan ba. Wannan daftarin aiki ba ya nufin ko bayyana lasisin haƙƙin mallaka da aka bayar anan don ƙirƙira ko ƙirƙira kowane haɗaɗɗiyar da'irori. Ba dole ba ne a yi amfani da samfuran a cikin kowane Tsarin Tallafi na Rayuwa ba tare da takamaiman izinin rubuce-rubuce na Silicon Laboratories ba. “Tsarin Tallafin Rayuwa” shine kowane samfur ko tsarin da aka yi niyya don tallafawa ko dorewar rayuwa da/ko lafiya, wanda, idan ya gaza, ana iya sa ran zai haifar da babban rauni ko mutuwa. Ba a yi nufin samfuran dakunan gwaje-gwaje na Silicon gabaɗaya don aikace-aikacen soja ba. Ba za a yi amfani da kayayyakin dakunan gwaje-gwaje na Silicon a ƙarƙashin wani yanayi ba a cikin makaman da suka haɗa da (amma ba'a iyakance ga) makaman nukiliya, na halitta ko makamai masu guba, ko makamai masu linzami masu iya isar da irin waɗannan makaman ba.
Bayanin Alamar kasuwanci
Silicon Laboratories Inc., Silicon Laboratories, Silicon Labs, SiLabs da Silicon Labs logo, CMEMS®, EFM, EFM32, EFR, Energy Micro, Energy Micro logo da haɗuwa da su, "mafi yawan makamashi abokantaka microcontrollers a duniya", Ember®, EZLink ®, EZMac®, EZRadio®, EZRadioPRO®, DSPLL®, ISOmodem ®, Precision32®, ProSLIC®, SiPHY®, USBXpress®, da sauransu alamun kasuwanci ne ko alamun kasuwanci masu rijista na Silicon Laboratories Inc. ARM, CORTEX, Cortex-M3 da THUMB alamun kasuwanci ne ko alamun kasuwanci masu rijista na ARM Holdings. Keil alamar kasuwanci ce mai rijista ta ARM Limited. Duk wasu samfura ko sunayen alamar da aka ambata a ciki alamun kasuwanci ne na masu riƙe su.
Abubuwan da aka bayar na Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, TX 78701
Amurka
http://www.silabs.com
An sauke daga Kibiya.com.
Takardu / Albarkatu
 |
SILICON LABS Si4010 Kit na Haɓakawa [pdf] Jagorar mai amfani Si4010, Kit ɗin Haɓakawa, Kayan Haɓaka Si4010 |
