revzilla Polaris PRO R Umarnin Bracket na tsaye

SHIGA BRACKET TSAYE

Abubuwan da ke ciki boye

1 HARDWARE DA AKA BAYAR

2 KAYAN NAN DA AKE BUKATA

3 UMARNI

4 Takardu / Albarkatu

4.1 Magana

5 Labarai masu alaka

HARDWARE DA AKA BAYAR

(2) # 10-24 x 5/8 ″ SS Button Head Allen Screw
(2) #10-24 Zinc Plated Nylock goro
(2) #10 SS Wanke
(4) M4 x 16 SS Button Head Allen Screw
(2) #10 x 5/8 ″ SS Phillips Truss Head Sheet Metal Screw

KAYAN NAN DA AKE BUKATA

Oscillating Multi kayan aiki tare da ruwa
direban T30
10mm soket
Drill
Silver Sharpie

UMARNI

Cire rufin roba na na'ura mai kwakwalwa na ciki.
Cire rivet ɗin mota daga bangon baya na aljihun ajiyar kayan aikin bidiyo.
Cire (2) T30 Torx sukurori daga ƙarƙashin dash. Bangaren fasinja daya, bangaren direba daya. Wannan zai ba ka damar tafiyar da igiyoyi zuwa rami na tsakiya zuwa kujerun baya da baturi.

Juya sashin rediyo/intercom baya don amfani da shi azaman samfuri kuma ka riƙe don dash. Alama (2) manyan wuraren hawa dunƙulewa. Zayyana gefen hagu da dama na waje na waje inda rediyon ya saka. Wannan yana taimakawa wajen kafa kayan saman sama wanda ke buƙatar a bar shi don maƙallan maƙala.
Zana layi biyu a tsaye kai tsaye daga gefen waje na alamar da kuka yi don rediyon. Fitar da ragowar aljihun ajiya don ku sami bayyanannen samfuri mai yankewa.

Cire (2) 10mm hex head screws don saki akwatin fuse gefen direba. Isa bayan dash kuma tura kayan aikin wayoyi daga bayan dash don hanawa
yankan wayoyi da gangan a cikin matakai masu zuwa.
Yin amfani da kayan aiki da yawa na oscillating don yanke, fara daga sama kuma ku yi aikin ku zuwa ƙasa ko wanne gefen bin layin da aka yi alama daga mataki na 5. Tabbatar yin amfani da tsayayyen hannun lokacin yankewa, tuna don tunawa da wayoyi a bayan dash cewa za ku ji. zama yanke zuwa. NASIHA: Muna ba da shawarar shirya na'ura mai kwakwalwa tare da tef mai shuɗi ko wani abu don taimakawa kare na'urar wasan bidiyo daga karce.

Tsaftace yanke kamar yadda ake buƙata da zarar an cire sashin da aka zayyana. Tushen hawan zai rufe dukkan gefuna da aka yanke don haka kada ku damu da sanya shi tsafta da madaidaiciya.
Shigar da rediyo da intercom a cikin sashi ta amfani da kayan aikin da aka kawo tare da intercom da rediyo. Sanya a cikin dash don bincika dacewa mai dacewa don ganin ko wani ƙarin abu yana buƙatar yankewa daga rukunin dash.

Idan Shigar da filtar KLF-2, muna ba da shawarar hawa kan tire na ƙasa.
Haɗa igiyoyi zuwa intercom da rediyo ta amfani da umarnin intercom. Bar jinkiri a cikin igiyoyi don samun damar sabis.

Ƙunƙasa madaidaicin zuwa saman hawa na sama tare da kayan aikin # 10-24 x 5/8 ″, yi amfani da # 10 x 5/8 ″ Phillips sukurori don haɗa ƙananan shafuka masu hawa cikin na'ura wasan bidiyo.
bangarorin gefe. Ƙasan gefen madaidaicin yana zaune yana walƙiya tare da panel ikon cigar 12V.