QwikProducts QT6104 Jagorar Shigarwa Mai Sauyawa Saurin Canjin Mota
Ƙayyade Motar Voltage
Jumper Waya - Yi amfani da injin PSC mai maye gurbin VAC 120 da capacitor
Babu Waya Jumper - Yi amfani da injin PSC mai maye gurbin VAC 240 da capacitor
Haɗa QwikSwap V3
Tare da kashe wuta, Cire wutar lantarki 5-pin da masu haɗin siginar 4-pin daga injin ECM mara lahani kuma toshe su cikin haɗin haɗin gwiwa akan QwikSwap V3 allo
5-pin Connector daga Motar zuwa
QwikSwap V3 Hukumar
sai… Tare da kashe wuta, cire mai haɗin siginar 16-pin (tare da wayoyi sama da 4) daga injin ECM mara lahani kuma toshe shi cikin haɗin haɗin gwiwa akan allon QwikSwap V3
4-pin Connector daga Motar zuwa Canjin Qwik V3 Hukumar
16-pin/4 Mai Haɗin waya daga Mota zuwa Kwamitin QwikSwap V3
Fiye da wayoyi 4 akan wannan haɗin mai-pin 16? Yi amfani da sauran umarnin!
IDAN PLUGS BA SU DACE KANA AMFANI DA KUNGIYAR QWIKSWAP, KADA KA YANKE MASU HADA!
Juya zuwa bayan wannan takardar, akwai ƙarin matakai kaɗan
Zaɓi Ƙarfin Horse
Yi amfani da Maɓallin Kanfigareshan akan allo don zaɓar ƙarfin dawakin injin ECM maras kyau.
Kula da alkiblar ON/KASHE a cikin Hoton.
NOTE: Matsayin KASHE ana nuna shi ta kibiya ƙasa a hagu na saitin!
| TSIRACANZANMATSAYI | ||||||||
| HP | 1 | 2 | 4 | KASHE | 6 | 7 | 8 | |
| 1/8 | ON | KASHE | KASHE | KASHE | KASHE | KASHE | KASHE | |
| 1/4 | ON | KASHE | KASHE | KASHE | KASHE | KASHE | KASHE | |
| 1/3 | ON | ON ON | KASHE | KASHE | KASHE | KASHE | KASHE | |
| 1/2 | ON | ON ON | ON | ON | KASHE | KASHE | KASHE | |
| 2/3 | ON | ON ON | ON | ON | KASHE | KASHE | KASHE | |
| 3/4 | ON | ON ON | ON | ON | ON | KASHE | KASHE | |
| 1 | ON | ON | ON | ON | ON | ON | ON | |
A cikin wannan adadi an saita motar zuwa 1/3 hp:
( ON, ON, ON, ON,
KASHE, KASHE, KASHE, KASHE, KASHE)
Tabbatar da Ingantacciyar Aiki & Kulle a Saituna
Sake haɗa wuta zuwa mai sarrafa iska. A walƙiya Yellow hali LED da m Ja (COM) LED yana nuna sadarwar da ta dace
A Idan da Yellow LED a kashe, tabbatar da ikon zuwa QwikSwap V3 allo. Idan da JAN LED yana kashe ko walƙiya, akwai kuskuren sadarwa.
b Kulle a cikin Kanfigareshan. Tare da har yanzu ana ba da wutar lantarki zuwa allon QwikSwap V3, saita duk saitunan daidaitawa zuwa KASHE.
C Saita Fan zuwa Kunnawa. Bayan ɗan gajeren jinkiri, da Kore (HIGH) LED ya kamata ya fara haske sannan ya zauna akan ɗayan (HIGH), (MED) ko (LOW) LEDs.
d Saita Fan zuwa Kashe. Bayan ɗan gajeren jinkiri, duk Kore LEDs ya kamata su juya kashe.
Shigar da Motar PSC & Capacitor (juyawa iri ɗaya da voltage)
a Shigar da injin PSC mai maye gurbin, hawa allon QwikSwap V3 kuma kunna capacitor.
b Haɗa wayar gama gari na motar PSC zuwa tashar MOTOR COM akan allon QwikSwap V3.
c Haɗa mashin ɗin sauri na PSC guda uku zuwa madaidaitan tashoshi akan allon QwikSwap V3
Takardu / Albarkatu
 |
QwikProducts QT6104 Maye gurbin Motar Saurin Sauri [pdf] Jagoran Shigarwa QT6104 Canjin Mota Mai Sauyawa, QT6104, Sauyawa Motar Saurin Sauyawa, Sauyawa Motar Sauyawa, Sauya Motoci, Sauyawa |
