PRO TECH Batir Mai Haɓaka Kirtani

Majalisa

Kayan aikin da ake buƙata: 5mm Allen Wrench (an haɗa)

1. Nemo mai tsabta fl a farfajiya don yin aiki.
2. Buɗe Tubin Trimmer don ya cika shi sosai kuma halves ɗin Tube Connector suna tare (Hoto 1). Yi hattara kada a matse waya da ke cikin bututu.
   
3. Amintar da Mai Haɗin Tube tare da Knob Connector.
4. Bude Clamp a kan Sub Handle kuma sanya Hannun akan Shaft ɗin Trimmer a gaban Gidan Canjawa (Hoto 2).
   
5. Rufe Clamp da kuma kiyaye shi da Outer Bolt, Washer da Trigger Lock.
6. Daidaita Kulle Trigger ta hanyar zare shi a kan kullin don ya matse lokacin clamped.
7. Cire Allen Wrench na 5mm daga wurin ajiya a Dutsen Batirin Shell (Hoto 3).
   
8. Juya Trimmer a kusa. Sanya Murfin Kariya akan Matsayin Dutsen kuma amintacce tare da 4 Screws ta amfani da Allen Wrench 5mm (Hoto 4).
   
9. Yanke mai kare furanni a cikin Dutsen Groove akan Shugaban Trimmer tare da Mai Tsaron kusurwa (Hoto 5).
   
10. Zame fakitin Baturi a cikin shimfiɗar Baturi a kan Gidan Trimmer, daidaita haƙarƙarin a cikin shimfiɗar jariri tare da ramuka a cikin Batirin har sai an haɗa shi wuri (Hoto 6).
    

Yadda Ake Amfani

1. Riƙe Ƙarƙashin Ƙarfafawa da hannu ɗaya da Canjin Gidajen Gidaje da ɗayan hannun. Da hannun da ke kan Handle Handle Handle danna maɓallin Kullewa ta atomatik tare da babban yatsan ka sannan ka matse Maɗaukakiyar Maɓallin da yatsun ka (Hoto 7). Da zarar mo-tor akan trimmer ya fara, zaku iya cire babban yatsan ku daga Button-Kulle ta atomatik. Idan mai datsa bai fara ba, duba haɗin baturi da matsayin iko.
   
2. Don tsayar da mai datsa, saki yatsunku daga Canjin Mai Sake kunnawa.
3. Trimmer yana da saitunan saurin 3; Ƙananan, Babban, da Turbo don iko da sarrafa iko. Don canza saitin saurin, matsar da Maɓallin Maɓallin Saurin zuwa inda ake so.

Takardu / Albarkatu

PRO TECH Batir Mai Haɓaka Kirtani [pdf] Jagorar mai amfani Mai Haɗa Keken Baturi

Magana

• Manual mai amfani