PLIANT TECHNOLOGIES PMC-2400M MicroCom M Jagorar Mai amfani Intercom Wireless Intercom
Samfurin Ƙarsheview
ACIKIN WANNAN Akwatin
ME YA HADA DA MICROCOM 2400M?
- Holster
- Lanyard
- Kebul na Caji
KAYAN HAKA
KASHI NA'URA
- PAC-USB6-CHG: MicroCom 6-Port USB Caja
- PAC-MC-5CASE: IP67-rated Hard Travel Case
- PAC-MC-SFTCASE: MicroCom Soft Travel Case
- Zaɓin naúrar kai masu jituwa (duba Pliant websaitin don ƙarin bayani)
SATA
- Haɗa na'urar kai zuwa jakar bel.
- A kunna. Latsa ka riƙe Ƙarfi maɓalli na daƙiƙa uku (3), har sai allon ya kunna.
- Zaɓi wani rukuni. Latsa ka riƙe Yanayin maɓallin na 3 seconds har sai alamar "GRP" tana ƙyalli akan LCD. Sa'an nan, yi amfani da Ƙarar +/- maɓallan don zaɓar lambar ƙungiya daga 0-51. Yanayin gajeriyar latsa don adana zaɓinku kuma ci gaba zuwa saitin ID.
Hoto 1: Allon Gyara Rukuni
MUHIMMI: Beltpacks dole ne su sami lambar rukuni ɗaya don sadarwa. - Zaɓi ID. Lokacin da "ID" ya fara lumshewa akan LCD, yi amfani da maɓallan Ƙarar +/- don zaɓar lambar ID. Latsa ka riƙe Yanayin don ajiye zaɓinku kuma fita daga menu.
- Fakitin ID suna daga 00-05.
- Fakiti ɗaya dole ne koyaushe yayi amfani da ID na “00” kuma yayi aiki azaman babban fakitin don aikin tsarin da ya dace. "MR" yana ƙaddamar da babban fakitin akan LCD ɗin sa.
Hoto 2: Allon Gyara ID (Master ID)
- Fakitin saurare kawai dole ne su yi amfani da ID na “05”. Kuna iya kwafin ID "05" akan bel ɗin bel da yawa idan kafa masu amfani kawai. (Dubi littafin MicroCom 2400M don ƙarin bayani game da wannan tsari.)
- Abubuwan bel ɗin da aka raba Talk dole ne su yi amfani da ID na "Sh". Kuna iya kwafin ID "Sh" akan bel ɗin bel da yawa idan kun kafa masu amfani da aka raba. Koyaya, ba za a iya amfani da ID na "Sh" a lokaci guda da ID ɗin cikakken duplex na ƙarshe ("04").
AIKI
- Magana - Yi amfani da maɓallin Magana don kunna ko kashe magana don na'urar. Wannan maɓallin yana canzawa tare da latsa guda ɗaya, gajeriyar latsa. "TK" yana bayyana akan LCD lokacin da aka kunna.
- Don cikakkun masu amfani da duplex, yi amfani da guda ɗaya, gajeriyar latsa don kunna magana da kashewa.
- Don masu amfani da Taɗi na Raba ("Sh"), danna ka riƙe yayin magana don kunna ta don na'urar. (Mai amfani da Taɗi Taɗi ɗaya kaɗai zai iya magana a lokaci ɗaya.)
- Ƙarar Sama da ƙasa – Yi amfani da + da maɓallan don sarrafa ƙarar. "VOL" da ƙimar lamba daga 00-09 suna bayyana akan LCD lokacin da aka daidaita ƙarar.
Multiple MicroCom Systems
Kowane tsarin MicroCom daban ya kamata yayi amfani da rukuni ɗaya don duk belpacks a cikin wannan tsarin. Pliant yana ba da shawarar cewa tsarin da ke aiki kusa da juna su saita Ƙungiyoyin su don zama aƙalla ƙima 10. Domin misaliample, idan tsarin ɗaya yana amfani da Rukunin 03, wani tsarin da ke kusa ya kamata ya yi amfani da Rukunin 13.
Baturi
- Rayuwar baturi: Kimanin. awa 7.5
- Lokacin caji daga komai: Kimanin. 3.5 hours
- Cajin LED akan jakar bel ɗin zai haskaka ja yayin caji kuma zai kashe lokacin da caji ya cika.
- Ana iya amfani da Beltpack yayin caji, amma yin hakan na iya ƙara lokacin caji.
Don samun dama ga menu, danna ka riƙe Yanayin button don 3 seconds. Da zarar kun gama canje-canjenku, danna ka riƙe Yanayin don ajiye zaɓinku kuma fita daga menu.
| Saitin Menu | Default | Zabuka | Bayani |
| Sautin Gefen | S3 | SO | Kashe |
| S1-S5 | Matakan 1-5 | ||
| Yanayin Karɓa | PO | PO | Yanayin Rx & Tx |
| PF | Yanayin Rx-Kawai (Sauraron-Kawai) | ||
| Matakan Hannun mic | C1 | C1-05 | Matakan 1-5 |
| Matsayin Fitar Sauti | UH | UL | Ƙananan |
| UH | Babban |
Nasihar Saituna ta Naúrar kai
| Nau'in Naúrar kai | Saitin da aka Shawarar | |
| Hankalin mic | Fitar Audio | |
| Naúrar kai tare da ƙarar ƙararrawa | Cl | UH |
| Naúrar kai tare da lavalier mic | C3 | UH |
Ƙarin Takardu
Wannan jagorar farawa ce mai sauri. Don ƙarin cikakkun bayanai akan saitunan menu, ƙayyadaddun na'ura, da garantin samfur, view cikakken MicroCom Operating Manual akan mu website. (Duba wannan lambar QR tare da na'urar tafi da gidanka don kewaya wurin da sauri.)
GOYON BAYAN KWASTOM
Pliant Technologies tana ba da tallafin fasaha ta waya da imel daga 07:00 zuwa 19:00 Tsakiyar Lokaci (UTC-06:00), Litinin zuwa Juma'a.
+1.844.475.4268 or +1.334.321.1160
abokin ciniki.support@plianttechnologies.com
Hakanan kuna iya ziyartar mu webshafin (www.plianttechnologies.com) don taimakon taɗi kai tsaye. (Tattaunawa kai tsaye akwai 08:00 zuwa 17:00 Tsakiyar Lokaci (UTC-06:00), Litinin-Jumma'a.)
Takardu / Albarkatu
 |
PLIANT TECHNOLOGIES PMC-2400M MicroCom M Wireless Intercom [pdf] Jagorar mai amfani PMC-2400M MicroCom M Wireless Intercom, PMC-2400M, MicroCom M Wireless Intercom, Wireless Intercom, Intercom |
