PLIANT TECHNOLOGIES MicroCom 2400XR Wireless Intercom
ACIKIN WANNAN Akwatin
ME YA HADA DA MICROCOM 2400XR?
- BeltPack
- Batirin Li-Ion (An shigar dashi yayin jigilar kaya)
- Kebul na Caji
- BeltPack Eriya (Mai zare da baya; haɗe zuwa belpack kafin aiki.)
- Jagoran Fara Mai Sauri
- Katin Rijistar Samfura
KAYAN HAKA
KASHI NA'URA
- PAC-USB6-CHG: MicroCom 6-Port USB Caja
- PAC-MCXR-5CASE: IP67-rated MicroCom Hard Carry Case
- PAC-MC-SFTCASE: MicroCom Soft Travel Case
- PBT-XRC-55: MicroCom XR 5+5 Drop-In BeltPack da Caja Baturi
- ANT-EXTMAG-01: MicroCom XR 1dB Magnetic na waje 900MHz / 2.4GHz Eriya
- PAC-MC4W-IO: Audio In/Out Adaftar naúrar kai don jerin MicroCom XR
- Zaɓin naúrar kai masu jituwa (duba Pliant websaitin don ƙarin bayani)
BAYANIN KYAUTATA
SATA
- Haɗa eriyar jakar bel ɗin. An juyar da zaren baya; dunƙule counter-clockwise.
- Haɗa na'urar kai zuwa jakar bel. Latsa da ƙarfi har sai ya danna don tabbatar da mai haɗin kai yana zaune yadda ya kamata.
- A kunne Latsa ka riƙe maɓallin wuta na tsawon daƙiƙa 2 har sai allon ya kunna.
- Shiga menu. Latsa ka riƙe maɓallin Yanayin na tsawon daƙiƙa 3 har sai allon ya canza zuwa . Yanayin gajeriyar latsa don gungurawa cikin saitunan, sannan gungura ta hanyar zaɓuɓɓukan saiti ta amfani da Ƙarar +/-. Latsa ka riƙe Yanayin don adana zaɓinka kuma fita menu.
a. Zaɓi ƙungiya. Zaɓi lambar ƙungiya daga 00-39. MUHIMMI: BeltPacks dole ne ya sami lambar rukuni ɗaya don sadarwa.
b. Zaɓi ID. Zaɓi lambar ID ta musamman.
• Mai maimaitawa* Zaɓuɓɓukan ID na yanayi: M, 01-08, S, ko L.
• Bakin bel guda ɗaya dole ne koyaushe yayi amfani da ID na “M” kuma yayi aiki azaman babban bel ɗin don aikin tsarin da ya dace.
• Jakunkuna na saurare kawai dole ne su yi amfani da ID na “L”. Kuna iya kwafin ID na “L” akan fakitin bel da yawa.
• Abubuwan bel ɗin da aka raba dole ne su yi amfani da ID na “S”. Kuna iya kwafin ID “S” akan fakitin bel da yawa, amma fakitin bel ɗin da aka raba kawai zai iya yin magana a lokaci ɗaya.
Lokacin amfani da ID na “S”, ba za a iya amfani da ID ɗin cikakken duplex na ƙarshe ba (“08” a Yanayin Maimaitawa).
c. Tabbatar da lambar tsaro na belpack. Duk belpacks dole ne su yi amfani da lambar tsaro iri ɗaya don aiki tare azaman tsari.
*Yanayin maimaitawa shine saitin tsoho. Duba littafin MicroCom 2400XR don bayani game da halaye, yadda ake canza yanayin, da saitunan kowane yanayi.
AIKI
- Yanayin LED – Blue (biyu kyaftawa) lokacin shiga ciki. Blue (kiftawar ido daya) lokacin fita. Ja yayin da ake ci gaba da cajin baturi (LED yana kashe lokacin da caji ya cika).
- Kulle – Don kunna tsakanin Kulle da Buɗe, danna kuma riƙe maɓallin Magana da Yanayin lokaci guda na tsawon daƙiƙa 3.
"Kulle" yana bayyana akan OLED lokacin da aka kulle. - Ƙarar Sama da ƙasa - Yi amfani da + da - maɓallan don sarrafa ƙarar naúrar kai. “Ƙarar” da alamar mataki-mataki suna nuna saitin ƙarar bel na yanzu akan OLED. Za ku ji ƙara a cikin na'urar kai da aka haɗa lokacin da aka canza ƙara. Za ku ji wani ƙara na daban, ƙara mafi girma lokacin da aka kai matsakaicin ƙara.
- Magana - Yi amfani da maɓallin Magana don kunna ko kashe magana don na'urar. "TALK" yana bayyana akan OLED lokacin da aka kunna.
» Latch magana: Guda ɗaya, gajeriyar latsa maɓallin.
» Magana na ɗan lokaci: Danna kuma ka riƙe maɓallin na tsawon daƙiƙa 2 ko fiye; za a ci gaba da magana har sai an saki maɓallin.
» Masu amfani da aka raba ("S" ID) suna amfani da magana na ɗan lokaci. Mai amfani da aka raba kawai zai iya magana a lokaci guda. - Yanayin – Short-latsa maɓallin Yanayin don kunna tsakanin tashoshin da aka kunna akan jakar bel. Dogon danna maɓallin Yanayin don samun dama ga menu.
Multiple MicroCom Systems
Kowane tsarin MicroCom daban ya kamata yayi amfani da Rukuni ɗaya da Lambar Tsaro don duk belpacks a waccan tsarin. Pliant yana ba da shawarar cewa tsarin da ke aiki kusa da juna su saita Ƙungiyoyin su don zama aƙalla ƙima goma (10).
Don misaliample, idan tsarin ɗaya yana amfani da Rukunin 03, wani tsarin da ke kusa ya kamata ya yi amfani da Rukunin 13.
Baturi
- Rayuwar baturi: Kimanin. awa 12
- Lokacin caji daga komai: Kimanin. Awanni 3.5 (haɗin tashar tashar USB) ko kusan. 6.5 hours (caja mai saukewa)
- Cajin LED akan jakar bel ɗin zai haskaka ja yayin caji kuma zai kashe lokacin da caji ya cika.
- Ana iya amfani da jakar bel yayin caji, amma yin hakan na iya tsawaita lokacin caji.
Baya ga Ƙungiya da ID na mai amfani, saitunan masu zuwa ana iya daidaita su daga menu na belpack.
| Saitin Menu | Default | Zabuka |
| Sautin Gefen | On | Kunnawa, Kashe |
| Mic Gain | 1 | 1-8 |
| Tashar A | On | Kunnawa, Kashe |
| Channel B* | On | Kunnawa, Kashe |
| Lambar Tsaro | 0000 | Alpha-lambobi |
*Babu Tashar B a Yanayin Yawo.
Nasihar Saituna ta Naúrar kai
| Nau'in Naúrar kai |
Saitin da aka Shawarar |
|
Mic Gain |
|
| SmartBoom LITE da PRO | 1 |
| MicroCom in-kunne na'urar kai | 7 |
| MicroCom lavalier microphone da eartube | 5 |
GOYON BAYAN KWASTOM
Pliant Technologies tana ba da tallafin fasaha ta waya da imel daga 07:00 zuwa 19:00 Tsakiyar Lokaci (UTC-06:00), Litinin zuwa Juma'a.
1.844.475.4268 ko +1.334.321.1160
abokin ciniki.support@plianttechnologies.com
Hakanan kuna iya ziyartar mu webshafin (www.plianttechnologies.com) don taimakon taɗi kai tsaye. (Tattaunawa kai tsaye akwai 08:00 zuwa 17:00 Tsakiyar Lokaci (UTC-06:00), Litinin zuwa Juma'a.)
Ƙarin Takardu
Wannan jagorar farawa ce mai sauri. Don ƙarin cikakkun bayanai akan saitunan menu, ƙayyadaddun na'ura, da garantin samfur, view Cikakken MicroCom 2400XR Aiki Manual akan mu website. (Duba wannan lambar QR tare da na'urar tafi da gidanka don kewaya wurin da sauri.)
Takardu / Albarkatu
 |
PLIANT TECHNOLOGIES MicroCom 2400XR Wireless Intercom [pdf] Jagorar mai amfani MicroCom 2400XR Wireless Intercom, MicroCom 2400XR, Mara waya ta Intercom, Intercom |
